Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=21349): Process ended prematurely: osmo-stp_10.42.42.5(pid=21349) [trial-2376↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21349)]
Standard Output
---------------------------------------------- trial-2376 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 15:59:15.647537 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 15:59:15.658543 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 15:59:15.801881 tst cs_paging_gprs_active.py: using LAC 29048 15:59:15.946620 tst cs_paging_gprs_active.py: using RAC 233 15:59:16.077831 tst cs_paging_gprs_active.py: using CellId 29048 15:59:16.198025 tst cs_paging_gprs_active.py: using BVCI 29049 15:59:16.222036 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 15:59:16.233742 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 15:59:16.245286 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 15:59:16.259350 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 15:59:16.272242 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 15:59:16.284702 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 15:59:16.296308 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 15:59:16.308919 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 15:59:16.321302 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 15:59:16.462198 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 15:59:16.786822 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 15:59:16.929753 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:59:17.326715 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21339): Launched 15:59:17.581734 run iperf3-srv_10.42.42.10(pid=21340): Launched 15:59:17.762863 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 15:59:17.886245 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:59:18.192805 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21341): Launched 15:59:18.447663 run iperf3-srv_10.42.42.10(pid=21342): Launched 15:59:18.628668 tst cs_paging_gprs_active.py:38: start network... 15:59:18.751897 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:59:19.215999 run create_hlr_db(pid=21343): Launched 15:59:19.387321 bus /sierra_2: Setting Powered False 15:59:20.410111 run create_hlr_db(pid=21343): Terminated: ok {rc=0} 15:59:20.831497 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21345): Launched 15:59:21.147778 run osmo-hlr_10.42.42.2(pid=21346): Launched 15:59:21.267371 run osmo-stp_10.42.42.5: Starting osmo-stp 15:59:21.818660 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21348): Launched 15:59:22.134953 run osmo-stp_10.42.42.5(pid=21349): Launched 15:59:22.250222 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:59:22.804002 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21351): Launched 15:59:22.917230 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:59:23.193239 run patchelf(pid=21352): Launched 15:59:23.379956 run osmo-stp_10.42.42.5(pid=21349): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21349)] 15:59:23.516735 run osmo-stp_10.42.42.5(pid=21349): stdout: | (launched: 2022-12-10_15:59:21.979979) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:59:23.653883 run osmo-stp_10.42.42.5(pid=21349): stderr: | �[0;m�[38;5;43m20221210155922169 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210155922169 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210155922169 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210155922170 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210155922170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210155922170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210155922170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:59:23.785941 run osmo-stp_10.42.42.5(pid=21349): stdout: | (launched: 2022-12-10_15:59:21.979979) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:59:23.916409 run osmo-stp_10.42.42.5(pid=21349): stderr: | �[0;m�[38;5;43m20221210155922169 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210155922169 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210155922169 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210155922170 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210155922170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210155922170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210155922170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:59:24.068664 run patchelf(pid=21352): Terminating (SIGINT) 15:59:24.247657 run patchelf(pid=21352): Terminated: ok {rc=0} 15:59:24.280542 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21349): Process ended prematurely: osmo-stp_10.42.42.5(pid=21349) [trial-2376↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21349)] [trial-2376↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 15:59:24.290392 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 15:59:24.353104 run osmo-hlr_10.42.42.2(pid=21346): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21346)] 15:59:24.404003 run osmo-hlr_10.42.42.2(pid=21346): stdout: | (launched: 2022-12-10_15:59:20.993167) 15:59:24.455619 run osmo-hlr_10.42.42.2(pid=21346): stderr: | �[0;m�[1;31m20221210155921190 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210155921190 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210155921190 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210155921190 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210155921190 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210155921190 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210155921202 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210155921210 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210155921210 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210155921210 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:59:24.499521 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21339): Terminating (SIGTERM) 15:59:24.541024 run iperf3-srv_10.42.42.10(pid=21340): Terminating (SIGTERM) 15:59:24.582516 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21341): Terminating (SIGTERM) 15:59:24.624025 run iperf3-srv_10.42.42.10(pid=21342): Terminating (SIGTERM) 15:59:24.665653 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21345): Terminating (SIGTERM) 15:59:24.707288 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21348): Terminating (SIGTERM) 15:59:24.749190 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21351): Terminating (SIGTERM) 15:59:24.758823 --- ParallelTerminationStrategy: PID 21339 died... 15:59:24.814958 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21339): Terminated: ok {rc=0} 15:59:24.825042 --- ParallelTerminationStrategy: PID 21340 died... 15:59:24.880031 run iperf3-srv_10.42.42.10(pid=21340): Terminated {rc=256} 15:59:24.889919 --- ParallelTerminationStrategy: PID 21341 died... 15:59:24.944657 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21341): Terminated: ok {rc=0} 15:59:24.954585 --- ParallelTerminationStrategy: PID 21342 died... 15:59:25.009564 run iperf3-srv_10.42.42.10(pid=21342): Terminated {rc=256} 15:59:25.019434 --- ParallelTerminationStrategy: PID 21345 died... 15:59:25.074509 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21345): Terminated: ok {rc=0} 15:59:25.084434 --- ParallelTerminationStrategy: PID 21348 died... 15:59:25.139695 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21348): Terminated: ok {rc=0} 15:59:25.149795 --- ParallelTerminationStrategy: PID 21351 died... 15:59:25.205463 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21351): Terminated: ok {rc=0} 15:59:25.292642 bus /gobi_0: Setting Powered False 15:59:26.399450 bus /gobi_0: Setting Powered False 15:59:27.507459 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21349): Process ended prematurely: osmo-stp_10.42.42.5(pid=21349) [trial-2376↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21349)]