Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=24311): Process ended prematurely: osmo-stp_10.42.42.5(pid=24311) [trial-2376↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24311)]
Standard Output
---------------------------------------------- trial-2376 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 16:26:06.244505 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:26:06.255651 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 16:26:06.397287 tst cs_paging_gprs_active.py: using LAC 29191 16:26:06.520538 tst cs_paging_gprs_active.py: using RAC 121 16:26:06.643620 tst cs_paging_gprs_active.py: using CellId 29191 16:26:06.766741 tst cs_paging_gprs_active.py: using BVCI 29192 16:26:06.791129 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:26:06.802454 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:26:06.813526 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:26:06.824581 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:26:06.835537 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:26:06.846506 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:26:06.857693 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:26:06.868514 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:26:06.879738 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:26:06.995716 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:26:07.286099 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:26:07.418959 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:26:07.747499 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24301): Launched 16:26:08.019680 run iperf3-srv_10.42.42.10(pid=24302): Launched 16:26:08.214974 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:26:08.347324 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:26:08.676679 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24303): Launched 16:26:08.949253 run iperf3-srv_10.42.42.10(pid=24304): Launched 16:26:09.145246 tst cs_paging_gprs_active.py:38: start network... 16:26:09.277823 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:26:09.785125 run create_hlr_db(pid=24305): Launched 16:26:09.968151 bus /gobi_6: Setting Powered False 16:26:10.990283 run create_hlr_db(pid=24305): Terminated: ok {rc=0} 16:26:11.412304 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24307): Launched 16:26:11.728012 run osmo-hlr_10.42.42.2(pid=24308): Launched 16:26:11.843207 run osmo-stp_10.42.42.5: Starting osmo-stp 16:26:12.392407 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24310): Launched 16:26:12.708369 run osmo-stp_10.42.42.5(pid=24311): Launched 16:26:12.822670 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:26:13.375602 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24313): Launched 16:26:13.488791 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:26:13.765064 run patchelf(pid=24314): Launched 16:26:13.952300 run osmo-stp_10.42.42.5(pid=24311): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24311)] 16:26:14.089191 run osmo-stp_10.42.42.5(pid=24311): stdout: | (launched: 2022-12-10_16:26:12.554128) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:26:14.225958 run osmo-stp_10.42.42.5(pid=24311): stderr: | �[0;m�[38;5;43m20221210162612744 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210162612744 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210162612745 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210162612745 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210162612746 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210162612746 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210162612746 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:26:14.357561 run osmo-stp_10.42.42.5(pid=24311): stdout: | (launched: 2022-12-10_16:26:12.554128) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:26:14.489027 run osmo-stp_10.42.42.5(pid=24311): stderr: | �[0;m�[38;5;43m20221210162612744 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210162612744 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210162612745 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210162612745 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210162612746 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210162612746 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210162612746 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:26:14.640812 run patchelf(pid=24314): Terminating (SIGINT) 16:26:14.819135 run patchelf(pid=24314): Terminated: ok {rc=0} 16:26:14.851903 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=24311): Process ended prematurely: osmo-stp_10.42.42.5(pid=24311) [trial-2376↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24311)] [trial-2376↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 16:26:14.861648 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 16:26:14.924646 run osmo-hlr_10.42.42.2(pid=24308): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24308)] 16:26:14.976147 run osmo-hlr_10.42.42.2(pid=24308): stdout: | (launched: 2022-12-10_16:26:11.573563) 16:26:15.028463 run osmo-hlr_10.42.42.2(pid=24308): stderr: | �[0;m�[1;31m20221210162611771 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210162611771 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210162611771 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210162611771 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210162611771 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210162611771 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210162611784 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210162611793 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210162611793 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210162611793 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:26:15.073479 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24301): Terminating (SIGTERM) 16:26:15.115545 run iperf3-srv_10.42.42.10(pid=24302): Terminating (SIGTERM) 16:26:15.157605 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24303): Terminating (SIGTERM) 16:26:15.199446 run iperf3-srv_10.42.42.10(pid=24304): Terminating (SIGTERM) 16:26:15.241426 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24307): Terminating (SIGTERM) 16:26:15.283426 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24310): Terminating (SIGTERM) 16:26:15.325509 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24313): Terminating (SIGTERM) 16:26:15.335217 --- ParallelTerminationStrategy: PID 24301 died... 16:26:15.391390 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24301): Terminated: ok {rc=0} 16:26:15.401594 --- ParallelTerminationStrategy: PID 24302 died... 16:26:15.457271 run iperf3-srv_10.42.42.10(pid=24302): Terminated {rc=256} 16:26:15.467336 --- ParallelTerminationStrategy: PID 24303 died... 16:26:15.523200 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24303): Terminated: ok {rc=0} 16:26:15.533381 --- ParallelTerminationStrategy: PID 24304 died... 16:26:15.588920 run iperf3-srv_10.42.42.10(pid=24304): Terminated {rc=256} 16:26:15.599067 --- ParallelTerminationStrategy: PID 24307 died... 16:26:15.655076 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24307): Terminated: ok {rc=0} 16:26:15.665294 --- ParallelTerminationStrategy: PID 24310 died... 16:26:15.721312 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24310): Terminated: ok {rc=0} 16:26:15.731526 --- ParallelTerminationStrategy: PID 24313 died... 16:26:15.787691 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24313): Terminated: ok {rc=0} 16:26:15.909490 bus /gobi_0: Setting Powered False 16:26:17.014443 bus /gobi_0: Setting Powered False 16:26:18.120991 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24311): Process ended prematurely: osmo-stp_10.42.42.5(pid=24311) [trial-2376↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24311)]