Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=22983): Process ended prematurely: osmo-stp_10.42.42.5(pid=22983) [trial-2376↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22983)]
Standard Output
---------------------------------------------- trial-2376 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 16:11:07.607666 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:07.619022 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 16:11:07.775193 tst cs_paging_gprs_active.py: using LAC 29110 16:11:07.898397 tst cs_paging_gprs_active.py: using RAC 40 16:11:08.022346 tst cs_paging_gprs_active.py: using CellId 29110 16:11:08.146569 tst cs_paging_gprs_active.py: using BVCI 29111 16:11:08.170935 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:08.182513 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:08.193992 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:08.207530 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:08.219297 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:08.230650 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:08.242178 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:08.253580 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:11:08.265062 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 16:11:08.385632 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 16:11:08.676366 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:11:08.809332 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:11:09.138988 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22973): Launched 16:11:09.412322 run iperf3-srv_10.42.42.10(pid=22974): Launched 16:11:09.608025 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:11:09.740786 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:11:10.069798 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22975): Launched 16:11:10.342243 run iperf3-srv_10.42.42.10(pid=22976): Launched 16:11:10.537679 tst cs_paging_gprs_active.py:38: start network... 16:11:10.670836 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:11:11.175489 run create_hlr_db(pid=22977): Launched 16:11:11.358911 bus /gobi_6: Setting Powered False 16:11:12.380147 run create_hlr_db(pid=22977): Terminated: ok {rc=0} 16:11:12.777697 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22979): Launched 16:11:13.073416 run osmo-hlr_10.42.42.2(pid=22980): Launched 16:11:13.186999 run osmo-stp_10.42.42.5: Starting osmo-stp 16:11:13.700784 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22982): Launched 16:11:13.995846 run osmo-stp_10.42.42.5(pid=22983): Launched 16:11:14.104109 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:11:14.618284 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22985): Launched 16:11:14.723518 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:11:14.980830 run patchelf(pid=22986): Launched 16:11:15.155188 run osmo-stp_10.42.42.5(pid=22983): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22983)] 16:11:15.283333 run osmo-stp_10.42.42.5(pid=22983): stdout: | (launched: 2022-12-10_16:11:13.851019) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:11:15.411528 run osmo-stp_10.42.42.5(pid=22983): stderr: | �[0;m�[38;5;43m20221210161114016 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210161114016 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210161114016 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210161114017 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210161114017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210161114017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210161114018 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:11:15.534310 run osmo-stp_10.42.42.5(pid=22983): stdout: | (launched: 2022-12-10_16:11:13.851019) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:11:15.655976 run osmo-stp_10.42.42.5(pid=22983): stderr: | �[0;m�[38;5;43m20221210161114016 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210161114016 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210161114016 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210161114017 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210161114017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210161114017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210161114018 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:11:15.798273 run patchelf(pid=22986): Terminating (SIGINT) 16:11:15.990140 run patchelf(pid=22986): Terminated: ok {rc=0} 16:11:16.037402 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22983): Process ended prematurely: osmo-stp_10.42.42.5(pid=22983) [trial-2376↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22983)] [trial-2376↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 16:11:16.050406 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 16:11:16.116124 run osmo-hlr_10.42.42.2(pid=22980): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22980)] 16:11:16.169650 run osmo-hlr_10.42.42.2(pid=22980): stdout: | (launched: 2022-12-10_16:11:12.927772) 16:11:16.224675 run osmo-hlr_10.42.42.2(pid=22980): stderr: | �[0;m�[1;31m20221210161113102 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210161113102 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210161113102 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210161113102 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210161113102 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210161113102 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210161113114 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210161113123 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210161113123 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210161113123 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:11:16.270805 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22973): Terminating (SIGTERM) 16:11:16.318641 run iperf3-srv_10.42.42.10(pid=22974): Terminating (SIGTERM) 16:11:16.366232 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22975): Terminating (SIGTERM) 16:11:16.410733 run iperf3-srv_10.42.42.10(pid=22976): Terminating (SIGTERM) 16:11:16.456375 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22979): Terminating (SIGTERM) 16:11:16.501514 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22982): Terminating (SIGTERM) 16:11:16.549196 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22985): Terminating (SIGTERM) 16:11:16.560812 --- ParallelTerminationStrategy: PID 22973 died... 16:11:16.628343 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22973): Terminated: ok {rc=0} 16:11:16.640903 --- ParallelTerminationStrategy: PID 22974 died... 16:11:16.708451 run iperf3-srv_10.42.42.10(pid=22974): Terminated {rc=256} 16:11:16.720663 --- ParallelTerminationStrategy: PID 22975 died... 16:11:16.786484 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22975): Terminated: ok {rc=0} 16:11:16.799200 --- ParallelTerminationStrategy: PID 22976 died... 16:11:16.866682 run iperf3-srv_10.42.42.10(pid=22976): Terminated {rc=256} 16:11:16.878627 --- ParallelTerminationStrategy: PID 22979 died... 16:11:16.942766 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22979): Terminated: ok {rc=0} 16:11:16.954941 --- ParallelTerminationStrategy: PID 22982 died... 16:11:17.021969 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22982): Terminated: ok {rc=0} 16:11:17.034344 --- ParallelTerminationStrategy: PID 22985 died... 16:11:17.101307 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22985): Terminated: ok {rc=0} 16:11:17.204453 bus /gobi_0: Setting Powered False 16:11:18.311258 bus /gobi_0: Setting Powered False 16:11:19.418668 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22983): Process ended prematurely: osmo-stp_10.42.42.5(pid=22983) [trial-2376↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22983)]