Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=22842): Process ended prematurely: osmo-stp_10.42.42.5(pid=22842) [trial-2376↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22842)]
Standard Output
---------------------------------------------- trial-2376 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 16:09:09.323240 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:09:09.334381 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 16:09:09.474470 tst cs_paging_gprs_active.py: using LAC 29100 16:09:09.594301 tst cs_paging_gprs_active.py: using RAC 30 16:09:09.720712 tst cs_paging_gprs_active.py: using CellId 29100 16:09:09.850459 tst cs_paging_gprs_active.py: using BVCI 29101 16:09:09.875542 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:09:09.887256 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:09:09.898825 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:09:09.910426 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:09:09.921772 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:09:09.933128 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:09:09.944518 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:09:09.955712 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:09:09.967102 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:09:10.085925 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:09:10.368828 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:09:10.497260 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:09:10.816736 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22832): Launched 16:09:11.081471 run iperf3-srv_10.42.42.10(pid=22833): Launched 16:09:11.269989 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:09:11.398220 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:09:11.718867 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22834): Launched 16:09:11.984383 run iperf3-srv_10.42.42.10(pid=22835): Launched 16:09:12.172416 tst cs_paging_gprs_active.py:38: start network... 16:09:12.300861 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:09:12.785406 run create_hlr_db(pid=22836): Launched 16:09:12.961737 bus /gobi_6: Setting Powered False 16:09:13.983329 run create_hlr_db(pid=22836): Terminated: ok {rc=0} 16:09:14.393168 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22838): Launched 16:09:14.699890 run osmo-hlr_10.42.42.2(pid=22839): Launched 16:09:14.820226 run osmo-stp_10.42.42.5: Starting osmo-stp 16:09:15.356133 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22841): Launched 16:09:15.664161 run osmo-stp_10.42.42.5(pid=22842): Launched 16:09:15.776145 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:09:16.367187 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22844): Launched 16:09:16.524484 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:09:16.899748 run patchelf(pid=22845): Launched 16:09:17.098258 run osmo-stp_10.42.42.5(pid=22842): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22842)] 16:09:17.243382 run osmo-stp_10.42.42.5(pid=22842): stdout: | (launched: 2022-12-10_16:09:15.511788) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:09:17.386077 run osmo-stp_10.42.42.5(pid=22842): stderr: | �[0;m�[38;5;43m20221210160915686 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210160915686 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210160915686 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210160915686 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210160915687 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210160915687 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210160915687 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:09:17.521499 run osmo-stp_10.42.42.5(pid=22842): stdout: | (launched: 2022-12-10_16:09:15.511788) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:09:17.656089 run osmo-stp_10.42.42.5(pid=22842): stderr: | �[0;m�[38;5;43m20221210160915686 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210160915686 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210160915686 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210160915686 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210160915687 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210160915687 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210160915687 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:09:17.812044 run patchelf(pid=22845): Terminating (SIGINT) 16:09:17.995215 run patchelf(pid=22845): Terminated: ok {rc=0} 16:09:18.028850 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22842): Process ended prematurely: osmo-stp_10.42.42.5(pid=22842) [trial-2376↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22842)] [trial-2376↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 16:09:18.039234 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 16:09:18.102389 run osmo-hlr_10.42.42.2(pid=22839): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22839)] 16:09:18.153724 run osmo-hlr_10.42.42.2(pid=22839): stdout: | (launched: 2022-12-10_16:09:14.549240) 16:09:18.205598 run osmo-hlr_10.42.42.2(pid=22839): stderr: | �[0;m�[1;31m20221210160914730 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210160914730 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210160914730 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210160914730 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210160914730 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210160914730 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210160914742 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210160914751 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210160914751 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210160914751 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:09:18.250075 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22832): Terminating (SIGTERM) 16:09:18.292002 run iperf3-srv_10.42.42.10(pid=22833): Terminating (SIGTERM) 16:09:18.334167 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22834): Terminating (SIGTERM) 16:09:18.376773 run iperf3-srv_10.42.42.10(pid=22835): Terminating (SIGTERM) 16:09:18.419044 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22838): Terminating (SIGTERM) 16:09:18.461066 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22841): Terminating (SIGTERM) 16:09:18.503082 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22844): Terminating (SIGTERM) 16:09:18.512358 --- ParallelTerminationStrategy: PID 22832 died... 16:09:18.569110 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22832): Terminated: ok {rc=0} 16:09:18.579561 --- ParallelTerminationStrategy: PID 22833 died... 16:09:18.635742 run iperf3-srv_10.42.42.10(pid=22833): Terminated {rc=256} 16:09:18.645929 --- ParallelTerminationStrategy: PID 22834 died... 16:09:18.701674 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22834): Terminated: ok {rc=0} 16:09:18.711823 --- ParallelTerminationStrategy: PID 22835 died... 16:09:18.767759 run iperf3-srv_10.42.42.10(pid=22835): Terminated {rc=256} 16:09:18.777926 --- ParallelTerminationStrategy: PID 22838 died... 16:09:18.833451 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22838): Terminated: ok {rc=0} 16:09:18.843526 --- ParallelTerminationStrategy: PID 22841 died... 16:09:18.899342 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22841): Terminated: ok {rc=0} 16:09:18.909509 --- ParallelTerminationStrategy: PID 22844 died... 16:09:18.965327 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22844): Terminated: ok {rc=0} 16:09:19.052553 bus /gobi_0: Setting Powered False 16:09:20.160457 bus /gobi_0: Setting Powered False 16:09:21.271732 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22842): Process ended prematurely: osmo-stp_10.42.42.5(pid=22842) [trial-2376↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22842)]