Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=23420): Process ended prematurely: osmo-stp_10.42.42.5(pid=23420) [trial-2376↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23420)]
Standard Output
---------------------------------------------- trial-2376 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 16:17:16.610672 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:17:16.622813 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 16:17:16.763509 tst cs_paging_gprs_active.py: using LAC 29144 16:17:16.887166 tst cs_paging_gprs_active.py: using RAC 74 16:17:17.039577 tst cs_paging_gprs_active.py: using CellId 29144 16:17:17.192667 tst cs_paging_gprs_active.py: using BVCI 29145 16:17:17.218455 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:17:17.230444 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:17:17.241998 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:17:17.254618 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:17:17.266429 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:17:17.277657 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:17:17.288752 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:17:17.299748 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:17:17.310993 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:17:17.428707 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:17:17.718385 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:17:17.852545 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:17:18.183479 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23410): Launched 16:17:18.457356 run iperf3-srv_10.42.42.10(pid=23411): Launched 16:17:18.653455 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:17:18.786592 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:17:19.117255 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23412): Launched 16:17:19.390599 run iperf3-srv_10.42.42.10(pid=23413): Launched 16:17:19.586436 tst cs_paging_gprs_active.py:38: start network... 16:17:19.719338 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:17:20.229120 run create_hlr_db(pid=23414): Launched 16:17:20.414284 bus /gobi_6: Setting Powered False 16:17:21.435139 run create_hlr_db(pid=23414): Terminated: ok {rc=0} 16:17:21.837454 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23416): Launched 16:17:22.135655 run osmo-hlr_10.42.42.2(pid=23417): Launched 16:17:22.254349 run osmo-stp_10.42.42.5: Starting osmo-stp 16:17:22.778571 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23419): Launched 16:17:23.075649 run osmo-stp_10.42.42.5(pid=23420): Launched 16:17:23.183531 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:17:23.701872 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23422): Launched 16:17:23.808272 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:17:24.066882 run patchelf(pid=23423): Launched 16:17:24.241945 run osmo-stp_10.42.42.5(pid=23420): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23420)] 16:17:24.370258 run osmo-stp_10.42.42.5(pid=23420): stdout: | (launched: 2022-12-10_16:17:22.929653) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:17:24.498968 run osmo-stp_10.42.42.5(pid=23420): stderr: | �[0;m�[38;5;43m20221210161723097 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210161723098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210161723098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210161723098 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210161723099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210161723099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210161723099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:17:24.622549 run osmo-stp_10.42.42.5(pid=23420): stdout: | (launched: 2022-12-10_16:17:22.929653) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:17:24.744924 run osmo-stp_10.42.42.5(pid=23420): stderr: | �[0;m�[38;5;43m20221210161723097 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210161723098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210161723098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210161723098 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210161723099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210161723099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210161723099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:17:24.887697 run patchelf(pid=23423): Terminating (SIGINT) 16:17:25.055391 run patchelf(pid=23423): Terminated: ok {rc=0} 16:17:25.086488 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=23420): Process ended prematurely: osmo-stp_10.42.42.5(pid=23420) [trial-2376↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23420)] [trial-2376↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 16:17:25.095540 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 16:17:25.155788 run osmo-hlr_10.42.42.2(pid=23417): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23417)] 16:17:25.204869 run osmo-hlr_10.42.42.2(pid=23417): stdout: | (launched: 2022-12-10_16:17:21.989090) 16:17:25.254542 run osmo-hlr_10.42.42.2(pid=23417): stderr: | �[0;m�[1;31m20221210161722165 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210161722165 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210161722165 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210161722165 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210161722165 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210161722165 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210161722177 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210161722186 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210161722186 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210161722186 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:17:25.296482 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23410): Terminating (SIGTERM) 16:17:25.336731 run iperf3-srv_10.42.42.10(pid=23411): Terminating (SIGTERM) 16:17:25.376803 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23412): Terminating (SIGTERM) 16:17:25.416799 run iperf3-srv_10.42.42.10(pid=23413): Terminating (SIGTERM) 16:17:25.457205 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23416): Terminating (SIGTERM) 16:17:25.497120 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23419): Terminating (SIGTERM) 16:17:25.537024 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23422): Terminating (SIGTERM) 16:17:25.546698 --- ParallelTerminationStrategy: PID 23410 died... 16:17:25.600010 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23410): Terminated: ok {rc=0} 16:17:25.609739 --- ParallelTerminationStrategy: PID 23411 died... 16:17:25.663076 run iperf3-srv_10.42.42.10(pid=23411): Terminated {rc=256} 16:17:25.672940 --- ParallelTerminationStrategy: PID 23412 died... 16:17:25.725800 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23412): Terminated: ok {rc=0} 16:17:25.735820 --- ParallelTerminationStrategy: PID 23413 died... 16:17:25.788400 run iperf3-srv_10.42.42.10(pid=23413): Terminated {rc=256} 16:17:25.798294 --- ParallelTerminationStrategy: PID 23416 died... 16:17:25.851664 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23416): Terminated: ok {rc=0} 16:17:25.861478 --- ParallelTerminationStrategy: PID 23419 died... 16:17:25.914186 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23419): Terminated: ok {rc=0} 16:17:25.924102 --- ParallelTerminationStrategy: PID 23422 died... 16:17:25.976970 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23422): Terminated: ok {rc=0} 16:17:26.059425 bus /gobi_0: Setting Powered False 16:17:27.165142 bus /gobi_0: Setting Powered False 16:17:28.272043 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23420): Process ended prematurely: osmo-stp_10.42.42.5(pid=23420) [trial-2376↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23420)]