Failed
dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=25067): Process ended prematurely: osmo-stp_10.42.42.5(pid=25067) [trial-2376↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25067)]
Standard Output
---------------------------------------------- trial-2376 dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 16:36:51.714546 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 16:36:51.727049 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 16:36:51.878873 tst switch_tch_pdch.py: using LAC 29248 16:36:51.993698 tst switch_tch_pdch.py: using RAC 178 16:36:52.107181 tst switch_tch_pdch.py: using CellId 29248 16:36:52.220750 tst switch_tch_pdch.py: using BVCI 29249 16:36:52.242953 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 16:36:52.254347 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 16:36:52.265441 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 16:36:52.276847 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 16:36:52.288234 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 16:36:52.299617 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 16:36:52.311808 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 16:36:52.323154 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 16:36:52.436527 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 16:36:52.719856 tst switch_tch_pdch.py:51: start network... 16:36:52.848758 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:36:53.345836 run create_hlr_db(pid=25061): Launched 16:36:53.527410 bus /gobi_6: Setting Powered False 16:36:54.547739 run create_hlr_db(pid=25061): Terminated: ok {rc=0} 16:36:54.962075 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25063): Launched 16:36:55.273526 run osmo-hlr_10.42.42.2(pid=25064): Launched 16:36:55.386995 run osmo-stp_10.42.42.5: Starting osmo-stp 16:36:55.926562 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25066): Launched 16:36:56.238209 run osmo-stp_10.42.42.5(pid=25067): Launched 16:36:56.350576 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:36:56.893080 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25069): Launched 16:36:57.003809 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:36:57.274211 run patchelf(pid=25070): Launched 16:36:57.456350 run osmo-stp_10.42.42.5(pid=25067): ERR: Terminated: ERROR {rc=1} [trial-2376↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25067)] 16:36:57.589939 run osmo-stp_10.42.42.5(pid=25067): stdout: | (launched: 2022-12-10_16:36:56.084760) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:36:57.723178 run osmo-stp_10.42.42.5(pid=25067): stderr: | �[0;m�[38;5;43m20221210163656275 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210163656275 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210163656276 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210163656276 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210163656278 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210163656278 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210163656279 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:36:57.851703 run osmo-stp_10.42.42.5(pid=25067): stdout: | (launched: 2022-12-10_16:36:56.084760) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:36:57.978883 run osmo-stp_10.42.42.5(pid=25067): stderr: | �[0;m�[38;5;43m20221210163656275 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210163656275 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210163656276 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210163656276 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210163656278 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210163656278 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210163656279 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:36:58.127073 run patchelf(pid=25070): Terminating (SIGINT) 16:36:58.301191 run patchelf(pid=25070): Terminated: ok {rc=0} 16:36:58.332832 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=25067): Process ended prematurely: osmo-stp_10.42.42.5(pid=25067) [trial-2376↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25067)] [trial-2376↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 16:36:58.342072 tst switch_tch_pdch.py:54: Test FAILED (6.6 sec) 16:36:58.404726 run osmo-hlr_10.42.42.2(pid=25064): ERR: Terminated: ERROR {rc=237} [trial-2376↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25064)] 16:36:58.455948 run osmo-hlr_10.42.42.2(pid=25064): stdout: | (launched: 2022-12-10_16:36:55.120482) 16:36:58.508294 run osmo-hlr_10.42.42.2(pid=25064): stderr: | �[0;m�[1;31m20221210163655317 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210163655317 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210163655317 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210163655317 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210163655317 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210163655317 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210163655333 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210163655342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210163655343 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210163655343 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:36:58.552434 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25063): Terminating (SIGTERM) 16:36:58.594153 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25066): Terminating (SIGTERM) 16:36:58.635895 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25069): Terminating (SIGTERM) 16:36:58.645309 --- ParallelTerminationStrategy: PID 25063 died... 16:36:58.701173 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25063): Terminated: ok {rc=0} 16:36:58.711325 --- ParallelTerminationStrategy: PID 25066 died... 16:36:58.766623 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25066): Terminated: ok {rc=0} 16:36:58.776650 --- ParallelTerminationStrategy: PID 25069 died... 16:36:58.832015 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25069): Terminated: ok {rc=0} 16:36:58.918420 bus /gobi_0: Setting Powered False 16:37:00.020825 bus /gobi_0: Setting Powered False 16:37:01.128857 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25067): Process ended prematurely: osmo-stp_10.42.42.5(pid=25067) [trial-2376↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25067)]