Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=26240): Process ended prematurely: osmo-stp_10.42.42.5(pid=26240) [trial-2376↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26240)]
Standard Output
---------------------------------------------- trial-2376 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 16:49:30.868172 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:30.881228 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 16:49:31.040607 tst iperf3m4.py: using LAC 29316 16:49:31.198898 tst iperf3m4.py: using RAC 246 16:49:31.325873 tst iperf3m4.py: using CellId 29316 16:49:31.479600 tst iperf3m4.py: using BVCI 29317 16:49:31.503812 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:31.516179 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:31.529761 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:31.543240 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:31.556599 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:31.568827 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:31.582471 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:31.597060 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:49:31.610707 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 16:49:31.742908 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 16:49:31.889723 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 16:49:32.019508 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 16:49:32.360805 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 16:49:32.487101 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:49:32.795331 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26226): Launched 16:49:33.049869 run iperf3-srv_10.42.42.10(pid=26227): Launched 16:49:33.230621 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 16:49:33.353811 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:49:33.661399 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26228): Launched 16:49:33.916148 run iperf3-srv_10.42.42.10(pid=26229): Launched 16:49:34.097004 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 16:49:34.219975 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:49:34.526562 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26230): Launched 16:49:34.780691 run iperf3-srv_10.42.42.10(pid=26231): Launched 16:49:34.960726 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 16:49:35.083937 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:49:35.391022 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26232): Launched 16:49:35.645867 run iperf3-srv_10.42.42.10(pid=26233): Launched 16:49:35.826458 tst iperf3m4.py:8: start network... 16:49:35.949797 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:49:36.416763 run create_hlr_db(pid=26234): Launched 16:49:36.588047 bus /gobi_6: Setting Powered False 16:49:37.610298 run create_hlr_db(pid=26234): Terminated: ok {rc=0} 16:49:38.031359 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26236): Launched 16:49:38.346967 run osmo-hlr_10.42.42.2(pid=26237): Launched 16:49:38.465564 run osmo-stp_10.42.42.5: Starting osmo-stp 16:49:39.016738 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26239): Launched 16:49:39.333897 run osmo-stp_10.42.42.5(pid=26240): Launched 16:49:39.449563 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:49:40.003790 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26242): Launched 16:49:40.116795 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:49:40.392129 run patchelf(pid=26243): Launched 16:49:40.577424 run osmo-stp_10.42.42.5(pid=26240): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26240)] 16:49:40.713335 run osmo-stp_10.42.42.5(pid=26240): stdout: | (launched: 2022-12-10_16:49:39.178325) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:49:40.849851 run osmo-stp_10.42.42.5(pid=26240): stderr: | �[0;m�[38;5;43m20221210164939365 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210164939365 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210164939365 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210164939366 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210164939366 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210164939366 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210164939366 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:49:40.980714 run osmo-stp_10.42.42.5(pid=26240): stdout: | (launched: 2022-12-10_16:49:39.178325) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:49:41.110597 run osmo-stp_10.42.42.5(pid=26240): stderr: | �[0;m�[38;5;43m20221210164939365 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210164939365 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210164939365 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210164939366 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210164939366 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210164939366 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210164939366 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:49:41.262093 run patchelf(pid=26243): Terminating (SIGINT) 16:49:41.440002 run patchelf(pid=26243): Terminated: ok {rc=0} 16:49:41.472802 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=26240): Process ended prematurely: osmo-stp_10.42.42.5(pid=26240) [trial-2376↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26240)] [trial-2376↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 16:49:41.482620 tst iperf3m4.py:8: Test FAILED (10.6 sec) 16:49:41.545382 run osmo-hlr_10.42.42.2(pid=26237): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26237)] 16:49:41.596444 run osmo-hlr_10.42.42.2(pid=26237): stdout: | (launched: 2022-12-10_16:49:38.192238) 16:49:41.648270 run osmo-hlr_10.42.42.2(pid=26237): stderr: | �[0;m�[1;31m20221210164938384 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210164938384 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210164938384 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210164938384 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210164938384 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210164938385 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210164938397 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210164938407 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210164938407 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210164938407 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:49:41.692349 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26226): Terminating (SIGTERM) 16:49:41.733960 run iperf3-srv_10.42.42.10(pid=26227): Terminating (SIGTERM) 16:49:41.775865 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26228): Terminating (SIGTERM) 16:49:41.817584 run iperf3-srv_10.42.42.10(pid=26229): Terminating (SIGTERM) 16:49:41.859390 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26230): Terminating (SIGTERM) 16:49:41.900849 run iperf3-srv_10.42.42.10(pid=26231): Terminating (SIGTERM) 16:49:41.944044 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26232): Terminating (SIGTERM) 16:49:41.985542 run iperf3-srv_10.42.42.10(pid=26233): Terminating (SIGTERM) 16:49:42.027150 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26236): Terminating (SIGTERM) 16:49:42.068422 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26239): Terminating (SIGTERM) 16:49:42.110201 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26242): Terminating (SIGTERM) 16:49:42.119790 --- ParallelTerminationStrategy: PID 26226 died... 16:49:42.175497 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26226): Terminated: ok {rc=0} 16:49:42.185866 --- ParallelTerminationStrategy: PID 26227 died... 16:49:42.241449 run iperf3-srv_10.42.42.10(pid=26227): Terminated {rc=256} 16:49:42.251523 --- ParallelTerminationStrategy: PID 26228 died... 16:49:42.307092 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26228): Terminated: ok {rc=0} 16:49:42.317159 --- ParallelTerminationStrategy: PID 26229 died... 16:49:42.372391 run iperf3-srv_10.42.42.10(pid=26229): Terminated {rc=256} 16:49:42.382437 --- ParallelTerminationStrategy: PID 26230 died... 16:49:42.437636 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26230): Terminated: ok {rc=0} 16:49:42.448759 --- ParallelTerminationStrategy: PID 26231 died... 16:49:42.504102 run iperf3-srv_10.42.42.10(pid=26231): Terminated {rc=256} 16:49:42.514412 --- ParallelTerminationStrategy: PID 26232 died... 16:49:42.569941 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26232): Terminated: ok {rc=0} 16:49:42.580020 --- ParallelTerminationStrategy: PID 26233 died... 16:49:42.635398 run iperf3-srv_10.42.42.10(pid=26233): Terminated {rc=256} 16:49:42.645403 --- ParallelTerminationStrategy: PID 26236 died... 16:49:42.700492 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26236): Terminated: ok {rc=0} 16:49:42.710445 --- ParallelTerminationStrategy: PID 26239 died... 16:49:42.765975 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26239): Terminated: ok {rc=0} 16:49:42.776131 --- ParallelTerminationStrategy: PID 26242 died... 16:49:42.831794 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26242): Terminated: ok {rc=0} 16:49:42.917855 bus /gobi_4: Setting Powered False 16:49:44.024643 bus /gobi_4: Setting Powered False 16:49:45.132353 bus /gobi_1: Setting Powered False 16:49:46.252314 bus /gobi_1: Setting Powered False 16:49:47.366307 bus /gobi_0: Setting Powered False 16:49:48.468667 bus /gobi_0: Setting Powered False 16:49:49.579768 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26240): Process ended prematurely: osmo-stp_10.42.42.5(pid=26240) [trial-2376↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26240)]