Failed
gprs:nanobts+band-900.cs_paging_gprs_active.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=26003): Process ended prematurely: osmo-stp_10.42.42.5(pid=26003) [trial-2376↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26003)]
Standard Output
---------------------------------------------- trial-2376 gprs:nanobts+band-900 cs_paging_gprs_active.py ---------------------------------------------- 16:46:10.515672 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:46:10.526949 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 16:46:10.668860 tst cs_paging_gprs_active.py: using LAC 29299 16:46:10.789479 tst cs_paging_gprs_active.py: using RAC 229 16:46:10.914067 tst cs_paging_gprs_active.py: using CellId 29299 16:46:11.039482 tst cs_paging_gprs_active.py: using BVCI 29300 16:46:11.063854 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:46:11.075096 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:46:11.086098 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:46:11.097060 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:46:11.107905 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:46:11.118881 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:46:11.129936 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:46:11.140803 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 16:46:11.151897 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 16:46:11.266161 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 16:46:11.543450 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:46:11.667720 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:46:11.978038 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25993): Launched 16:46:12.234458 run iperf3-srv_10.42.42.10(pid=25994): Launched 16:46:12.417330 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:46:12.541806 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:46:12.851546 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25995): Launched 16:46:13.107937 run iperf3-srv_10.42.42.10(pid=25996): Launched 16:46:13.289869 tst cs_paging_gprs_active.py:38: start network... 16:46:13.413495 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:46:13.882434 run create_hlr_db(pid=25997): Launched 16:46:14.054866 bus /sierra_2: Setting Powered False 16:46:15.076682 run create_hlr_db(pid=25997): Terminated: ok {rc=0} 16:46:15.501723 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25999): Launched 16:46:15.821163 run osmo-hlr_10.42.42.2(pid=26000): Launched 16:46:16.063424 run osmo-stp_10.42.42.5: Starting osmo-stp 16:46:16.645647 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26002): Launched 16:46:17.099865 run osmo-stp_10.42.42.5(pid=26003): Launched 16:46:17.231616 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:46:17.773308 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26005): Launched 16:46:17.879666 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:46:18.140605 run patchelf(pid=26006): Launched 16:46:18.315637 run osmo-stp_10.42.42.5(pid=26003): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26003)] 16:46:18.443847 run osmo-stp_10.42.42.5(pid=26003): stdout: | (launched: 2022-12-10_16:46:16.803285) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:46:18.573238 run osmo-stp_10.42.42.5(pid=26003): stderr: | �[0;m�[38;5;43m20221210164617042 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210164617042 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210164617042 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210164617043 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210164617043 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210164617043 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210164617043 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:46:18.697134 run osmo-stp_10.42.42.5(pid=26003): stdout: | (launched: 2022-12-10_16:46:16.803285) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:46:18.819943 run osmo-stp_10.42.42.5(pid=26003): stderr: | �[0;m�[38;5;43m20221210164617042 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210164617042 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210164617042 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210164617043 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210164617043 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210164617043 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210164617043 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:46:18.962959 run patchelf(pid=26006): Terminating (SIGINT) 16:46:19.131650 run patchelf(pid=26006): Terminated: ok {rc=0} 16:46:19.162628 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26003): Process ended prematurely: osmo-stp_10.42.42.5(pid=26003) [trial-2376↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26003)] [trial-2376↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38] 16:46:19.171722 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 16:46:19.232689 run osmo-hlr_10.42.42.2(pid=26000): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:nanobts+band-900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26000)] 16:46:19.281890 run osmo-hlr_10.42.42.2(pid=26000): stdout: | (launched: 2022-12-10_16:46:15.664769) 16:46:19.331516 run osmo-hlr_10.42.42.2(pid=26000): stderr: | �[0;m�[1;31m20221210164615882 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210164615882 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210164615882 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210164615882 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210164615882 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210164615882 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210164615899 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:nanobts+band-900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210164615922 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210164615922 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210164615922 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:46:19.373641 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25993): Terminating (SIGTERM) 16:46:19.413798 run iperf3-srv_10.42.42.10(pid=25994): Terminating (SIGTERM) 16:46:19.453503 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25995): Terminating (SIGTERM) 16:46:19.493435 run iperf3-srv_10.42.42.10(pid=25996): Terminating (SIGTERM) 16:46:19.533574 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25999): Terminating (SIGTERM) 16:46:19.573709 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26002): Terminating (SIGTERM) 16:46:19.614293 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26005): Terminating (SIGTERM) 16:46:19.623883 --- ParallelTerminationStrategy: PID 25993 died... 16:46:19.677807 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25993): Terminated: ok {rc=0} 16:46:19.688176 --- ParallelTerminationStrategy: PID 25994 died... 16:46:19.741285 run iperf3-srv_10.42.42.10(pid=25994): Terminated {rc=256} 16:46:19.751349 --- ParallelTerminationStrategy: PID 25995 died... 16:46:19.804515 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25995): Terminated: ok {rc=0} 16:46:19.814608 --- ParallelTerminationStrategy: PID 25996 died... 16:46:19.867667 run iperf3-srv_10.42.42.10(pid=25996): Terminated {rc=256} 16:46:19.877743 --- ParallelTerminationStrategy: PID 25999 died... 16:46:19.930821 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25999): Terminated: ok {rc=0} 16:46:19.940928 --- ParallelTerminationStrategy: PID 26002 died... 16:46:19.994947 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26002): Terminated: ok {rc=0} 16:46:20.004716 --- ParallelTerminationStrategy: PID 26005 died... 16:46:20.058273 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26005): Terminated: ok {rc=0} 16:46:20.146074 bus /gobi_0: Setting Powered False 16:46:21.249355 bus /gobi_0: Setting Powered False 16:46:22.355238 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26003): Process ended prematurely: osmo-stp_10.42.42.5(pid=26003) [trial-2376↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26003)]