Failed
gprs:trx-b200+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=22072): Process ended prematurely: osmo-stp_10.42.42.5(pid=22072) [trial-2376↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22072)]
Standard Output
---------------------------------------------- trial-2376 gprs:trx-b200+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 16:02:06.002875 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:02:06.014533 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 16:02:06.174797 tst ping_idle_ping.py: using LAC 29062 16:02:06.297224 tst ping_idle_ping.py: using RAC 247 16:02:06.415767 tst ping_idle_ping.py: using CellId 29062 16:02:06.531420 tst ping_idle_ping.py: using BVCI 29063 16:02:06.554677 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:02:06.565819 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:02:06.576548 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:02:06.587679 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:02:06.598810 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:02:06.610027 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:02:06.621132 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:02:06.632293 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 16:02:06.906323 tst ping_idle_ping.py:24: start network... 16:02:07.032306 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:02:07.510607 run create_hlr_db(pid=22066): Launched 16:02:07.683542 bus /gobi_6: Setting Powered False 16:02:08.703826 run create_hlr_db(pid=22066): Terminated: ok {rc=0} 16:02:09.102952 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22068): Launched 16:02:09.402427 run osmo-hlr_10.42.42.2(pid=22069): Launched 16:02:09.515808 run osmo-stp_10.42.42.5: Starting osmo-stp 16:02:10.034514 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22071): Launched 16:02:10.334064 run osmo-stp_10.42.42.5(pid=22072): Launched 16:02:10.443745 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:02:10.964290 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22074): Launched 16:02:11.071475 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:02:11.331801 run patchelf(pid=22075): Launched 16:02:11.506598 run osmo-stp_10.42.42.5(pid=22072): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22072)] 16:02:11.634453 run osmo-stp_10.42.42.5(pid=22072): stdout: | (launched: 2022-12-10_16:02:10.186474) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:02:11.762400 run osmo-stp_10.42.42.5(pid=22072): stderr: | �[0;m�[38;5;43m20221210160210357 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210160210357 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210160210357 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210160210358 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210160210360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210160210360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210160210360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:02:11.886493 run osmo-stp_10.42.42.5(pid=22072): stdout: | (launched: 2022-12-10_16:02:10.186474) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:02:12.008905 run osmo-stp_10.42.42.5(pid=22072): stderr: | �[0;m�[38;5;43m20221210160210357 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210160210357 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210160210357 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210160210358 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210160210360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210160210360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210160210360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:02:12.151368 run patchelf(pid=22075): Terminating (SIGINT) 16:02:12.318586 run patchelf(pid=22075): Terminated: ok {rc=0} 16:02:12.349359 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=22072): Process ended prematurely: osmo-stp_10.42.42.5(pid=22072) [trial-2376↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22072)] [trial-2376↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 16:02:12.357999 tst ping_idle_ping.py:27: Test FAILED (6.3 sec) 16:02:12.418466 run osmo-hlr_10.42.42.2(pid=22069): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22069)] 16:02:12.467609 run osmo-hlr_10.42.42.2(pid=22069): stdout: | (launched: 2022-12-10_16:02:09.254338) 16:02:12.517503 run osmo-hlr_10.42.42.2(pid=22069): stderr: | �[0;m�[1;31m20221210160209430 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210160209430 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210160209430 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210160209430 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210160209430 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210160209431 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210160209443 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:trx-b200+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210160209452 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210160209452 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210160209452 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:02:12.559612 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22068): Terminating (SIGTERM) 16:02:12.599890 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22071): Terminating (SIGTERM) 16:02:12.639773 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22074): Terminating (SIGTERM) 16:02:12.649268 --- ParallelTerminationStrategy: PID 22068 died... 16:02:12.703051 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22068): Terminated: ok {rc=0} 16:02:12.712791 --- ParallelTerminationStrategy: PID 22071 died... 16:02:12.765301 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22071): Terminated: ok {rc=0} 16:02:12.774924 --- ParallelTerminationStrategy: PID 22074 died... 16:02:12.827433 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22074): Terminated: ok {rc=0} 16:02:12.911165 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22072): Process ended prematurely: osmo-stp_10.42.42.5(pid=22072) [trial-2376↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22072)]