Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=22091): Process ended prematurely: osmo-stp_10.42.42.5(pid=22091) [trial-2376↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22091)]
Standard Output
---------------------------------------------- trial-2376 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 16:02:15.063245 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:02:15.074172 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 16:02:15.232516 tst cs_paging_gprs_active.py: using LAC 29063 16:02:15.351760 tst cs_paging_gprs_active.py: using RAC 248 16:02:15.472300 tst cs_paging_gprs_active.py: using CellId 29063 16:02:15.593536 tst cs_paging_gprs_active.py: using BVCI 29064 16:02:15.616631 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:02:15.627497 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:02:15.638274 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:02:15.649192 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:02:15.660011 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:02:15.670958 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:02:15.682077 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:02:15.692879 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:02:15.703936 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 16:02:15.822087 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 16:02:16.140212 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:02:16.280688 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:02:16.639064 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22081): Launched 16:02:16.940933 run iperf3-srv_10.42.42.10(pid=22082): Launched 16:02:17.146821 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:02:17.284210 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:02:17.623085 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22083): Launched 16:02:17.902094 run iperf3-srv_10.42.42.10(pid=22084): Launched 16:02:18.101884 tst cs_paging_gprs_active.py:38: start network... 16:02:18.237834 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:02:18.757509 run create_hlr_db(pid=22085): Launched 16:02:18.945834 bus /gobi_6: Setting Powered False 16:02:19.966631 run create_hlr_db(pid=22085): Terminated: ok {rc=0} 16:02:20.374048 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22087): Launched 16:02:20.678613 run osmo-hlr_10.42.42.2(pid=22088): Launched 16:02:20.798030 run osmo-stp_10.42.42.5: Starting osmo-stp 16:02:21.332638 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22090): Launched 16:02:21.636528 run osmo-stp_10.42.42.5(pid=22091): Launched 16:02:21.754296 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:02:22.291689 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22093): Launched 16:02:22.400311 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:02:22.665754 run patchelf(pid=22094): Launched 16:02:22.843699 run osmo-stp_10.42.42.5(pid=22091): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22091)] 16:02:22.974433 run osmo-stp_10.42.42.5(pid=22091): stdout: | (launched: 2022-12-10_16:02:21.486949) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:02:23.105877 run osmo-stp_10.42.42.5(pid=22091): stderr: | �[0;m�[38;5;43m20221210160221657 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210160221657 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210160221657 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210160221658 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210160221660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210160221660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210160221660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:02:23.231720 run osmo-stp_10.42.42.5(pid=22091): stdout: | (launched: 2022-12-10_16:02:21.486949) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:02:23.356551 run osmo-stp_10.42.42.5(pid=22091): stderr: | �[0;m�[38;5;43m20221210160221657 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210160221657 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210160221657 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210160221658 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210160221660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210160221660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210160221660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:02:23.502741 run patchelf(pid=22094): Terminating (SIGINT) 16:02:23.674038 run patchelf(pid=22094): Terminated: ok {rc=0} 16:02:23.705592 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22091): Process ended prematurely: osmo-stp_10.42.42.5(pid=22091) [trial-2376↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22091)] [trial-2376↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 16:02:23.714775 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 16:02:23.775782 run osmo-hlr_10.42.42.2(pid=22088): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22088)] 16:02:23.824847 run osmo-hlr_10.42.42.2(pid=22088): stdout: | (launched: 2022-12-10_16:02:20.528536) 16:02:23.874461 run osmo-hlr_10.42.42.2(pid=22088): stderr: | �[0;m�[1;31m20221210160220704 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210160220704 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210160220705 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210160220705 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210160220705 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210160220705 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210160220718 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210160220726 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210160220726 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210160220726 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:02:23.916681 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22081): Terminating (SIGTERM) 16:02:23.956802 run iperf3-srv_10.42.42.10(pid=22082): Terminating (SIGTERM) 16:02:23.997673 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22083): Terminating (SIGTERM) 16:02:24.037645 run iperf3-srv_10.42.42.10(pid=22084): Terminating (SIGTERM) 16:02:24.077754 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22087): Terminating (SIGTERM) 16:02:24.117893 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22090): Terminating (SIGTERM) 16:02:24.158289 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22093): Terminating (SIGTERM) 16:02:24.167578 --- ParallelTerminationStrategy: PID 22081 died... 16:02:24.221330 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22081): Terminated: ok {rc=0} 16:02:24.230900 --- ParallelTerminationStrategy: PID 22082 died... 16:02:24.284076 run iperf3-srv_10.42.42.10(pid=22082): Terminated {rc=256} 16:02:24.293909 --- ParallelTerminationStrategy: PID 22083 died... 16:02:24.347246 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22083): Terminated: ok {rc=0} 16:02:24.357146 --- ParallelTerminationStrategy: PID 22084 died... 16:02:24.410558 run iperf3-srv_10.42.42.10(pid=22084): Terminated {rc=256} 16:02:24.420348 --- ParallelTerminationStrategy: PID 22087 died... 16:02:24.473609 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22087): Terminated: ok {rc=0} 16:02:24.483433 --- ParallelTerminationStrategy: PID 22090 died... 16:02:24.536693 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22090): Terminated: ok {rc=0} 16:02:24.546406 --- ParallelTerminationStrategy: PID 22093 died... 16:02:24.600147 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22093): Terminated: ok {rc=0} 16:02:24.688079 bus /gobi_0: Setting Powered False 16:02:25.791097 bus /gobi_0: Setting Powered False 16:02:26.898298 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22091): Process ended prematurely: osmo-stp_10.42.42.5(pid=22091) [trial-2376↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22091)]