Failed
gprs:sysmo.ping.py (from gprs_sysmo)
Stacktrace
osmo-stp_10.42.42.5(pid=26928): Process ended prematurely: osmo-stp_10.42.42.5(pid=26928) [trial-2379↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26928)]
Standard Output
---------------------------------------------- trial-2379 gprs:sysmo ping.py ---------------------------------------------- 16:12:49.549848 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 16:12:49.561484 tst gprs:sysmo: Using 1 x bts (candidates: 1) 16:12:49.685900 tst ping.py: using LAC 29999 16:12:49.807501 tst ping.py: using RAC 164 16:12:49.926900 tst ping.py: using CellId 29999 16:12:50.046290 tst ping.py: using BVCI 30000 16:12:50.069777 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 16:12:50.080666 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 16:12:50.091602 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 16:12:50.102132 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 16:12:50.112539 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 16:12:50.123088 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 16:12:50.133776 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 16:12:50.144384 tst gprs:sysmo: Using 1 x modem (candidates: 4) 16:12:50.438569 tst ping.py:19: start network... 16:12:50.574810 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:12:51.091457 run create_hlr_db(pid=26922): Launched 16:12:51.280082 bus /gobi_6: Setting Powered False 16:12:52.299676 run create_hlr_db(pid=26922): Terminated: ok {rc=0} 16:12:52.709869 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26924): Launched 16:12:53.015044 run osmo-hlr_10.42.42.2(pid=26925): Launched 16:12:53.126749 run osmo-stp_10.42.42.5: Starting osmo-stp 16:12:53.655512 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26927): Launched 16:12:53.959529 run osmo-stp_10.42.42.5(pid=26928): Launched 16:12:54.068630 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:12:54.597631 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26930): Launched 16:12:54.705535 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:12:54.972185 run patchelf(pid=26931): Launched 16:12:55.150039 run osmo-stp_10.42.42.5(pid=26928): ERR: Terminated: ERROR {rc=1} [trial-2379↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26928)] 16:12:55.279967 run osmo-stp_10.42.42.5(pid=26928): stdout: | (launched: 2022-12-12_16:12:53.808687) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:12:55.410455 run osmo-stp_10.42.42.5(pid=26928): stderr: | �[0;m�[38;5;43m20221212161253978 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212161253978 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212161253978 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212161253979 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212161253980 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212161253980 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212161253980 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:12:55.537415 run osmo-stp_10.42.42.5(pid=26928): stdout: | (launched: 2022-12-12_16:12:53.808687) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:12:55.662059 run osmo-stp_10.42.42.5(pid=26928): stderr: | �[0;m�[38;5;43m20221212161253978 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212161253978 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212161253978 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212161253979 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212161253980 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212161253980 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212161253980 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:12:55.806529 run patchelf(pid=26931): Terminating (SIGINT) 16:12:55.975737 run patchelf(pid=26931): Terminated: ok {rc=0} 16:12:56.006769 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=26928): Process ended prematurely: osmo-stp_10.42.42.5(pid=26928) [trial-2379↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26928)] [trial-2379↪gprs:sysmo↪ping.py:22] 16:12:56.015693 tst ping.py:22: Test FAILED (6.5 sec) 16:12:56.076302 run osmo-hlr_10.42.42.2(pid=26925): ERR: Terminated: ERROR {rc=237} [trial-2379↪gprs:sysmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26925)] 16:12:56.125762 run osmo-hlr_10.42.42.2(pid=26925): stdout: | (launched: 2022-12-12_16:12:52.863730) 16:12:56.176343 run osmo-hlr_10.42.42.2(pid=26925): stderr: | �[0;m�[1;31m20221212161253039 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212161253039 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212161253039 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212161253039 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212161253039 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212161253039 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212161253052 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2379/run.2022-12-12_16-06-15/gprs:sysmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212161253060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212161253060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212161253060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:12:56.218970 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26924): Terminating (SIGTERM) 16:12:56.259705 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26927): Terminating (SIGTERM) 16:12:56.299973 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26930): Terminating (SIGTERM) 16:12:56.309468 --- ParallelTerminationStrategy: PID 26924 died... 16:12:56.363183 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26924): Terminated: ok {rc=0} 16:12:56.373329 --- ParallelTerminationStrategy: PID 26927 died... 16:12:56.427009 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26927): Terminated: ok {rc=0} 16:12:56.437089 --- ParallelTerminationStrategy: PID 26930 died... 16:12:56.490612 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26930): Terminated: ok {rc=0} 16:12:56.581040 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26928): Process ended prematurely: osmo-stp_10.42.42.5(pid=26928) [trial-2379↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26928)]