Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=10232): Process ended prematurely: osmo-stp_10.42.42.5(pid=10232) [trial-2380↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10232)]
Standard Output
---------------------------------------------- trial-2380 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 18:03:54.323173 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 18:03:54.333889 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 18:03:54.471703 tst cs_paging_gprs_active.py: using LAC 30545 18:03:54.592221 tst cs_paging_gprs_active.py: using RAC 200 18:03:54.713183 tst cs_paging_gprs_active.py: using CellId 30545 18:03:54.833251 tst cs_paging_gprs_active.py: using BVCI 30546 18:03:54.856281 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 18:03:54.866986 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 18:03:54.877523 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 18:03:54.888219 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 18:03:54.898783 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 18:03:54.909422 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 18:03:54.920116 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 18:03:54.930861 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 18:03:54.941628 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 18:03:55.063959 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 18:03:55.342718 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:03:55.469857 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:03:55.787345 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10222): Launched 18:03:56.052633 run iperf3-srv_10.42.42.10(pid=10223): Launched 18:03:56.239019 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:03:56.365860 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:03:56.683525 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10224): Launched 18:03:56.946150 run iperf3-srv_10.42.42.10(pid=10225): Launched 18:03:57.131668 tst cs_paging_gprs_active.py:38: start network... 18:03:57.258543 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:03:57.739807 run create_hlr_db(pid=10226): Launched 18:03:57.914269 bus /sierra_2: Setting Powered False 18:03:58.937384 run create_hlr_db(pid=10226): Terminated: ok {rc=0} 18:03:59.343786 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10228): Launched 18:03:59.651085 run osmo-hlr_10.42.42.2(pid=10229): Launched 18:03:59.770052 run osmo-stp_10.42.42.5: Starting osmo-stp 18:04:00.305861 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10231): Launched 18:04:00.611468 run osmo-stp_10.42.42.5(pid=10232): Launched 18:04:00.722635 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:04:01.313348 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10234): Launched 18:04:01.433909 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:04:01.741902 run patchelf(pid=10235): Launched 18:04:01.938093 run osmo-stp_10.42.42.5(pid=10232): ERR: Terminated: ERROR {rc=1} [trial-2380↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10232)] 18:04:02.081062 run osmo-stp_10.42.42.5(pid=10232): stdout: | (launched: 2022-12-12_18:04:00.460190) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:04:02.224754 run osmo-stp_10.42.42.5(pid=10232): stderr: | �[0;m�[38;5;43m20221212180400630 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212180400631 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212180400631 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212180400631 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212180400632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212180400632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212180400632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:04:02.360057 run osmo-stp_10.42.42.5(pid=10232): stdout: | (launched: 2022-12-12_18:04:00.460190) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:04:02.493527 run osmo-stp_10.42.42.5(pid=10232): stderr: | �[0;m�[38;5;43m20221212180400630 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212180400631 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212180400631 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212180400631 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212180400632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212180400632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212180400632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:04:02.648719 run patchelf(pid=10235): Terminating (SIGINT) 18:04:02.829973 run patchelf(pid=10235): Terminated: ok {rc=0} 18:04:02.863796 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10232): Process ended prematurely: osmo-stp_10.42.42.5(pid=10232) [trial-2380↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10232)] [trial-2380↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 18:04:02.874136 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 18:04:02.937635 run osmo-hlr_10.42.42.2(pid=10229): ERR: Terminated: ERROR {rc=237} [trial-2380↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10229)] 18:04:02.989299 run osmo-hlr_10.42.42.2(pid=10229): stdout: | (launched: 2022-12-12_18:03:59.498057) 18:04:03.041570 run osmo-hlr_10.42.42.2(pid=10229): stderr: | �[0;m�[1;31m20221212180359671 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212180359671 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212180359671 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212180359671 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212180359671 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212180359671 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212180359683 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212180359692 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212180359692 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212180359692 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:04:03.086317 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10222): Terminating (SIGTERM) 18:04:03.128648 run iperf3-srv_10.42.42.10(pid=10223): Terminating (SIGTERM) 18:04:03.172314 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10224): Terminating (SIGTERM) 18:04:03.214662 run iperf3-srv_10.42.42.10(pid=10225): Terminating (SIGTERM) 18:04:03.257425 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10228): Terminating (SIGTERM) 18:04:03.299395 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10231): Terminating (SIGTERM) 18:04:03.341378 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10234): Terminating (SIGTERM) 18:04:03.351140 --- ParallelTerminationStrategy: PID 10222 died... 18:04:03.407509 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10222): Terminated: ok {rc=0} 18:04:03.417770 --- ParallelTerminationStrategy: PID 10223 died... 18:04:03.473399 run iperf3-srv_10.42.42.10(pid=10223): Terminated {rc=256} 18:04:03.483355 --- ParallelTerminationStrategy: PID 10224 died... 18:04:03.539390 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10224): Terminated: ok {rc=0} 18:04:03.549574 --- ParallelTerminationStrategy: PID 10225 died... 18:04:03.605192 run iperf3-srv_10.42.42.10(pid=10225): Terminated {rc=256} 18:04:03.615184 --- ParallelTerminationStrategy: PID 10228 died... 18:04:03.671284 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10228): Terminated: ok {rc=0} 18:04:03.681384 --- ParallelTerminationStrategy: PID 10231 died... 18:04:03.737408 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10231): Terminated: ok {rc=0} 18:04:03.747433 --- ParallelTerminationStrategy: PID 10234 died... 18:04:03.803365 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10234): Terminated: ok {rc=0} 18:04:03.891347 bus /gobi_0: Setting Powered False 18:04:04.996040 bus /gobi_0: Setting Powered False 18:04:06.106835 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10232): Process ended prematurely: osmo-stp_10.42.42.5(pid=10232) [trial-2380↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10232)]