Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms-limenet-micro.ping.py (from gprs_trx-lms-limenet-micro)

Failing for the past 242 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=13720): Process ended prematurely: osmo-stp_10.42.42.5(pid=13720) [trial-2380↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13720)]

Standard Output

----------------------------------------------
trial-2380 gprs:trx-lms-limenet-micro ping.py
----------------------------------------------
18:38:38.630818 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
18:38:38.642300 tst       gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1)
18:38:38.776407 tst                          ping.py: using LAC 30728
18:38:38.895744 tst                          ping.py: using RAC 128
18:38:39.009368 tst                          ping.py: using CellId 30728
18:38:39.123723 tst                          ping.py: using BVCI 30729
18:38:39.146264 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
18:38:39.157094 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
18:38:39.167671 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
18:38:39.178652 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
18:38:39.189382 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
18:38:39.200149 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
18:38:39.211132 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
18:38:39.222027 tst       gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4)
18:38:39.492928 tst                       ping.py:19: start network...
18:38:39.615133 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
18:38:40.078362 run         create_hlr_db(pid=13714): Launched
18:38:40.248573 bus                          /gobi_6: Setting Powered False
18:38:41.269872 run         create_hlr_db(pid=13714): Terminated: ok {rc=0}
18:38:41.690462 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13716): Launched
18:38:42.007685 run   osmo-hlr_10.42.42.2(pid=13717): Launched
18:38:42.121264 run              osmo-stp_10.42.42.5: Starting osmo-stp
18:38:42.673745 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13719): Launched
18:38:42.990486 run   osmo-stp_10.42.42.5(pid=13720): Launched
18:38:43.104771 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
18:38:43.655807 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13722): Launched
18:38:43.767654 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
18:38:44.042228 run              patchelf(pid=13723): Launched
18:38:44.225485 run   osmo-stp_10.42.42.5(pid=13720): ERR: Terminated: ERROR {rc=1}  [trial-2380↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13720)]
18:38:44.360286 run   osmo-stp_10.42.42.5(pid=13720): stdout: 
| (launched: 2022-12-12_18:38:42.834599)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:38:44.494445 run   osmo-stp_10.42.42.5(pid=13720): stderr: 
| �[0;m�[38;5;43m20221212183843025 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212183843025 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212183843025 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212183843025 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212183843026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212183843026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212183843026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:38:44.623866 run   osmo-stp_10.42.42.5(pid=13720): stdout: 
| (launched: 2022-12-12_18:38:42.834599)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:38:44.752248 run   osmo-stp_10.42.42.5(pid=13720): stderr: 
| �[0;m�[38;5;43m20221212183843025 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212183843025 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212183843025 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212183843025 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212183843026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212183843026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212183843026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:38:44.902054 run              patchelf(pid=13723): Terminating (SIGINT)
18:38:45.078149 run              patchelf(pid=13723): Terminated: ok {rc=0}
18:38:45.110279 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=13720): Process ended prematurely: osmo-stp_10.42.42.5(pid=13720) [trial-2380↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13720)]  [trial-2380↪gprs:trx-lms-limenet-micro↪ping.py:22]
18:38:45.119604 tst                       ping.py:22: Test FAILED (6.5 sec)
18:38:45.181808 run   osmo-hlr_10.42.42.2(pid=13717): ERR: Terminated: ERROR {rc=237}  [trial-2380↪gprs:trx-lms-limenet-micro↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13717)]
18:38:45.232733 run   osmo-hlr_10.42.42.2(pid=13717): stdout: 
| (launched: 2022-12-12_18:38:41.850556) 
18:38:45.284765 run   osmo-hlr_10.42.42.2(pid=13717): stderr: 
| �[0;m�[1;31m20221212183842044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212183842044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212183842044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212183842044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212183842044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212183842044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212183842057 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:trx-lms-limenet-micro/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212183842066 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212183842066 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212183842066 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
18:38:45.328717 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13716): Terminating (SIGTERM)
18:38:45.370150 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13719): Terminating (SIGTERM)
18:38:45.411576 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13722): Terminating (SIGTERM)
18:38:45.421322 ---      ParallelTerminationStrategy: PID 13716 died...
18:38:45.476786 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13716): Terminated: ok {rc=0}
18:38:45.486841 ---      ParallelTerminationStrategy: PID 13719 died...
18:38:45.542010 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13719): Terminated: ok {rc=0}
18:38:45.552012 ---      ParallelTerminationStrategy: PID 13722 died...
18:38:45.607502 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13722): Terminated: ok {rc=0}
18:38:45.694907 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13720): Process ended prematurely: osmo-stp_10.42.42.5(pid=13720) [trial-2380↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13720)]