Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms.ping.py (from gprs_trx-lms)

Failing for the past 54 builds (Since #2327 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=13178): Process ended prematurely: osmo-stp_10.42.42.5(pid=13178) [trial-2380↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13178)]

Standard Output

----------------------------------------------
trial-2380 gprs:trx-lms ping.py
----------------------------------------------
18:30:43.310728 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
18:30:43.322528 tst                     gprs:trx-lms: Using 1 x bts (candidates: 1)
18:30:43.459557 tst                          ping.py: using LAC 30686
18:30:43.578768 tst                          ping.py: using RAC 86
18:30:43.695275 tst                          ping.py: using CellId 30686
18:30:43.814035 tst                          ping.py: using BVCI 30687
18:30:43.836793 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
18:30:43.847418 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
18:30:43.857963 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
18:30:43.868753 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
18:30:43.879492 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
18:30:43.890210 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
18:30:43.900902 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
18:30:43.911673 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
18:30:44.203579 tst                       ping.py:19: start network...
18:30:44.341060 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
18:30:44.854572 run         create_hlr_db(pid=13172): Launched
18:30:45.039692 bus                          /gobi_6: Setting Powered False
18:30:46.092784 run         create_hlr_db(pid=13172): Terminated: ok {rc=0}
18:30:46.558607 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13174): Launched
18:30:46.910507 run   osmo-hlr_10.42.42.2(pid=13175): Launched
18:30:47.098715 run              osmo-stp_10.42.42.5: Starting osmo-stp
18:30:47.762571 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13177): Launched
18:30:48.085449 run   osmo-stp_10.42.42.5(pid=13178): Launched
18:30:48.199924 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
18:30:48.757394 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13180): Launched
18:30:48.870929 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
18:30:49.152352 run              patchelf(pid=13181): Launched
18:30:49.339007 run   osmo-stp_10.42.42.5(pid=13178): ERR: Terminated: ERROR {rc=1}  [trial-2380↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13178)]
18:30:49.475124 run   osmo-stp_10.42.42.5(pid=13178): stdout: 
| (launched: 2022-12-12_18:30:47.925050)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:30:49.611370 run   osmo-stp_10.42.42.5(pid=13178): stderr: 
| �[0;m�[38;5;43m20221212183048119 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212183048120 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212183048120 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212183048121 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212183048121 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212183048121 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212183048121 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:30:49.743349 run   osmo-stp_10.42.42.5(pid=13178): stdout: 
| (launched: 2022-12-12_18:30:47.925050)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:30:49.874299 run   osmo-stp_10.42.42.5(pid=13178): stderr: 
| �[0;m�[38;5;43m20221212183048119 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212183048120 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212183048120 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212183048121 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212183048121 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212183048121 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212183048121 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:30:50.026452 run              patchelf(pid=13181): Terminating (SIGINT)
18:30:50.204574 run              patchelf(pid=13181): Terminated: ok {rc=0}
18:30:50.237298 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=13178): Process ended prematurely: osmo-stp_10.42.42.5(pid=13178) [trial-2380↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13178)]  [trial-2380↪gprs:trx-lms↪ping.py:22]
18:30:50.246732 tst                       ping.py:22: Test FAILED (6.9 sec)
18:30:50.309582 run   osmo-hlr_10.42.42.2(pid=13175): ERR: Terminated: ERROR {rc=237}  [trial-2380↪gprs:trx-lms↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13175)]
18:30:50.360734 run   osmo-hlr_10.42.42.2(pid=13175): stdout: 
| (launched: 2022-12-12_18:30:46.722800) 
18:30:50.412792 run   osmo-hlr_10.42.42.2(pid=13175): stderr: 
| �[0;m�[1;31m20221212183047115 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212183047115 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212183047115 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212183047115 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212183047115 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212183047115 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212183047136 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:trx-lms/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212183047163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212183047164 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212183047164 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
18:30:50.456763 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13174): Terminating (SIGTERM)
18:30:50.498622 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13177): Terminating (SIGTERM)
18:30:50.540278 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13180): Terminating (SIGTERM)
18:30:50.550116 ---      ParallelTerminationStrategy: PID 13174 died...
18:30:50.605849 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13174): Terminated: ok {rc=0}
18:30:50.615904 ---      ParallelTerminationStrategy: PID 13177 died...
18:30:50.671571 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13177): Terminated: ok {rc=0}
18:30:50.681708 ---      ParallelTerminationStrategy: PID 13180 died...
18:30:50.737295 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13180): Terminated: ok {rc=0}
18:30:50.825855 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13178): Process ended prematurely: osmo-stp_10.42.42.5(pid=13178) [trial-2380↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13178)]