Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=23713): Process ended prematurely: osmo-stp_10.42.42.5(pid=23713) [trial-2381↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23713)]
Standard Output
---------------------------------------------- trial-2381 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 20:22:11.202349 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:22:11.215091 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 20:22:11.363065 tst iperf3m4.py: using LAC 31274 20:22:11.490431 tst iperf3m4.py: using RAC 164 20:22:11.615767 tst iperf3m4.py: using CellId 31274 20:22:11.737277 tst iperf3m4.py: using BVCI 31275 20:22:11.760303 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:22:11.771848 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:22:11.783385 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:22:11.795031 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:22:11.806617 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:22:11.818278 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:22:11.829959 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:22:11.841295 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 20:22:11.852737 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 20:22:11.968823 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 20:22:12.088269 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 20:22:12.208181 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 20:22:12.503105 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 20:22:12.638189 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:22:12.974072 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23699): Launched 20:22:13.252743 run iperf3-srv_10.42.42.10(pid=23700): Launched 20:22:13.451268 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 20:22:13.586662 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:22:13.922075 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23701): Launched 20:22:14.201513 run iperf3-srv_10.42.42.10(pid=23702): Launched 20:22:14.399969 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 20:22:14.534383 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:22:14.870703 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23703): Launched 20:22:15.151062 run iperf3-srv_10.42.42.10(pid=23704): Launched 20:22:15.349605 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 20:22:15.484031 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:22:15.820697 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23705): Launched 20:22:16.129983 run iperf3-srv_10.42.42.10(pid=23706): Launched 20:22:16.323457 tst iperf3m4.py:8: start network... 20:22:16.455520 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:22:17.046718 run create_hlr_db(pid=23707): Launched 20:22:17.266416 bus /gobi_6: Setting Powered False 20:22:18.251639 run create_hlr_db(pid=23707): Terminated: ok {rc=0} 20:22:18.713036 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23709): Launched 20:22:19.037032 run osmo-hlr_10.42.42.2(pid=23710): Launched 20:22:19.160153 run osmo-stp_10.42.42.5: Starting osmo-stp 20:22:19.723374 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23712): Launched 20:22:20.048300 run osmo-stp_10.42.42.5(pid=23713): Launched 20:22:20.166093 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:22:20.733077 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23715): Launched 20:22:20.848647 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:22:21.131927 run patchelf(pid=23716): Launched 20:22:21.322596 run osmo-stp_10.42.42.5(pid=23713): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23713)] 20:22:21.461943 run osmo-stp_10.42.42.5(pid=23713): stdout: | (launched: 2022-12-12_20:22:19.888065) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:22:21.602046 run osmo-stp_10.42.42.5(pid=23713): stderr: | �[0;m�[38;5;43m20221212202220076 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212202220076 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212202220076 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212202220076 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212202220077 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212202220077 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212202220077 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:22:21.736620 run osmo-stp_10.42.42.5(pid=23713): stdout: | (launched: 2022-12-12_20:22:19.888065) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:22:21.870091 run osmo-stp_10.42.42.5(pid=23713): stderr: | �[0;m�[38;5;43m20221212202220076 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212202220076 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212202220076 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212202220076 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212202220077 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212202220077 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212202220077 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:22:22.025609 run patchelf(pid=23716): Terminating (SIGINT) 20:22:22.208287 run patchelf(pid=23716): Terminated: ok {rc=0} 20:22:22.242023 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=23713): Process ended prematurely: osmo-stp_10.42.42.5(pid=23713) [trial-2381↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23713)] [trial-2381↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 20:22:22.252036 tst iperf3m4.py:8: Test FAILED (11.1 sec) 20:22:22.317169 run osmo-hlr_10.42.42.2(pid=23710): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23710)] 20:22:22.369782 run osmo-hlr_10.42.42.2(pid=23710): stdout: | (launched: 2022-12-12_20:22:18.876874) 20:22:22.422733 run osmo-hlr_10.42.42.2(pid=23710): stderr: | �[0;m�[1;31m20221212202219070 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212202219070 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212202219070 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212202219070 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212202219070 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212202219070 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212202219084 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212202219092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212202219092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212202219092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:22:22.467130 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23699): Terminating (SIGTERM) 20:22:22.509290 run iperf3-srv_10.42.42.10(pid=23700): Terminating (SIGTERM) 20:22:22.551443 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23701): Terminating (SIGTERM) 20:22:22.593693 run iperf3-srv_10.42.42.10(pid=23702): Terminating (SIGTERM) 20:22:22.635984 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23703): Terminating (SIGTERM) 20:22:22.678361 run iperf3-srv_10.42.42.10(pid=23704): Terminating (SIGTERM) 20:22:22.720144 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23705): Terminating (SIGTERM) 20:22:22.762262 run iperf3-srv_10.42.42.10(pid=23706): Terminating (SIGTERM) 20:22:22.804323 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23709): Terminating (SIGTERM) 20:22:22.846859 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23712): Terminating (SIGTERM) 20:22:22.888855 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23715): Terminating (SIGTERM) 20:22:22.898892 --- ParallelTerminationStrategy: PID 23699 died... 20:22:22.955970 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23699): Terminated: ok {rc=0} 20:22:22.966194 --- ParallelTerminationStrategy: PID 23700 died... 20:22:23.022340 run iperf3-srv_10.42.42.10(pid=23700): Terminated {rc=256} 20:22:23.032738 --- ParallelTerminationStrategy: PID 23701 died... 20:22:23.089277 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23701): Terminated: ok {rc=0} 20:22:23.099686 --- ParallelTerminationStrategy: PID 23702 died... 20:22:23.155637 run iperf3-srv_10.42.42.10(pid=23702): Terminated {rc=256} 20:22:23.166070 --- ParallelTerminationStrategy: PID 23703 died... 20:22:23.222385 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23703): Terminated: ok {rc=0} 20:22:23.233027 --- ParallelTerminationStrategy: PID 23704 died... 20:22:23.289919 run iperf3-srv_10.42.42.10(pid=23704): Terminated {rc=256} 20:22:23.300573 --- ParallelTerminationStrategy: PID 23705 died... 20:22:23.356826 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23705): Terminated: ok {rc=0} 20:22:23.367277 --- ParallelTerminationStrategy: PID 23706 died... 20:22:23.423575 run iperf3-srv_10.42.42.10(pid=23706): Terminated {rc=256} 20:22:23.434074 --- ParallelTerminationStrategy: PID 23709 died... 20:22:23.490775 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23709): Terminated: ok {rc=0} 20:22:23.501471 --- ParallelTerminationStrategy: PID 23712 died... 20:22:23.557630 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23712): Terminated: ok {rc=0} 20:22:23.568014 --- ParallelTerminationStrategy: PID 23715 died... 20:22:23.624661 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23715): Terminated: ok {rc=0} 20:22:23.711692 bus /gobi_4: Setting Powered False 20:22:24.820075 bus /gobi_4: Setting Powered False 20:22:25.932177 bus /gobi_1: Setting Powered False 20:22:27.035030 bus /gobi_1: Setting Powered False 20:22:28.145373 bus /gobi_0: Setting Powered False 20:22:29.252725 bus /gobi_0: Setting Powered False 20:22:30.361555 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23713): Process ended prematurely: osmo-stp_10.42.42.5(pid=23713) [trial-2381↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23713)]