Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=18855): Process ended prematurely: osmo-stp_10.42.42.5(pid=18855) [trial-2381↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18855)]
Standard Output
---------------------------------------------- trial-2381 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 19:24:51.530191 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:24:51.541778 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 19:24:51.695035 tst cs_paging_gprs_active.py: using LAC 30970 19:24:51.822350 tst cs_paging_gprs_active.py: using RAC 115 19:24:51.943815 tst cs_paging_gprs_active.py: using CellId 30970 19:24:52.065122 tst cs_paging_gprs_active.py: using BVCI 30971 19:24:52.088497 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:24:52.099609 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:24:52.110375 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:24:52.121060 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:24:52.131548 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:24:52.142254 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:24:52.153415 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:24:52.163993 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:24:52.174802 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 19:24:52.294921 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 19:24:52.577823 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:24:52.705379 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:24:53.023328 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18845): Launched 19:24:53.288233 run iperf3-srv_10.42.42.10(pid=18846): Launched 19:24:53.473689 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:24:53.600117 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:24:53.918092 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18847): Launched 19:24:54.180739 run iperf3-srv_10.42.42.10(pid=18848): Launched 19:24:54.366236 tst cs_paging_gprs_active.py:38: start network... 19:24:54.492490 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:24:54.981762 run create_hlr_db(pid=18849): Launched 19:24:55.157408 bus /gobi_6: Setting Powered False 19:24:56.179806 run create_hlr_db(pid=18849): Terminated: ok {rc=0} 19:24:56.588358 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18851): Launched 19:24:56.895103 run osmo-hlr_10.42.42.2(pid=18852): Launched 19:24:57.011590 run osmo-stp_10.42.42.5: Starting osmo-stp 19:24:57.541883 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18854): Launched 19:24:57.848178 run osmo-stp_10.42.42.5(pid=18855): Launched 19:24:57.958764 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:24:58.491239 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18857): Launched 19:24:58.599907 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:24:58.867162 run patchelf(pid=18858): Launched 19:24:59.047409 run osmo-stp_10.42.42.5(pid=18855): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18855)] 19:24:59.178641 run osmo-stp_10.42.42.5(pid=18855): stdout: | (launched: 2022-12-12_19:24:57.697081) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:24:59.310090 run osmo-stp_10.42.42.5(pid=18855): stderr: | �[0;m�[38;5;43m20221212192457870 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212192457870 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212192457870 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212192457871 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212192457871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212192457871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212192457871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:24:59.436220 run osmo-stp_10.42.42.5(pid=18855): stdout: | (launched: 2022-12-12_19:24:57.697081) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:24:59.561355 run osmo-stp_10.42.42.5(pid=18855): stderr: | �[0;m�[38;5;43m20221212192457870 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212192457870 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212192457870 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212192457871 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212192457871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212192457871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212192457871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:24:59.707647 run patchelf(pid=18858): Terminating (SIGINT) 19:24:59.879770 run patchelf(pid=18858): Terminated: ok {rc=0} 19:24:59.911458 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18855): Process ended prematurely: osmo-stp_10.42.42.5(pid=18855) [trial-2381↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18855)] [trial-2381↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 19:24:59.920507 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 19:24:59.981564 run osmo-hlr_10.42.42.2(pid=18852): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18852)] 19:25:00.031400 run osmo-hlr_10.42.42.2(pid=18852): stdout: | (launched: 2022-12-12_19:24:56.743658) 19:25:00.082160 run osmo-hlr_10.42.42.2(pid=18852): stderr: | �[0;m�[1;31m20221212192456922 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212192456922 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212192456922 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212192456923 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212192456923 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212192456923 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212192456934 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212192456944 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212192456944 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212192456944 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:25:00.125100 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18845): Terminating (SIGTERM) 19:25:00.165227 run iperf3-srv_10.42.42.10(pid=18846): Terminating (SIGTERM) 19:25:00.205483 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18847): Terminating (SIGTERM) 19:25:00.245524 run iperf3-srv_10.42.42.10(pid=18848): Terminating (SIGTERM) 19:25:00.285833 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18851): Terminating (SIGTERM) 19:25:00.325941 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18854): Terminating (SIGTERM) 19:25:00.366037 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18857): Terminating (SIGTERM) 19:25:00.375257 --- ParallelTerminationStrategy: PID 18845 died... 19:25:00.429126 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18845): Terminated: ok {rc=0} 19:25:00.438744 --- ParallelTerminationStrategy: PID 18846 died... 19:25:00.492008 run iperf3-srv_10.42.42.10(pid=18846): Terminated {rc=256} 19:25:00.501616 --- ParallelTerminationStrategy: PID 18847 died... 19:25:00.554995 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18847): Terminated: ok {rc=0} 19:25:00.564498 --- ParallelTerminationStrategy: PID 18848 died... 19:25:00.617939 run iperf3-srv_10.42.42.10(pid=18848): Terminated {rc=256} 19:25:00.627496 --- ParallelTerminationStrategy: PID 18851 died... 19:25:00.681083 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18851): Terminated: ok {rc=0} 19:25:00.690630 --- ParallelTerminationStrategy: PID 18854 died... 19:25:00.743981 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18854): Terminated: ok {rc=0} 19:25:00.753605 --- ParallelTerminationStrategy: PID 18857 died... 19:25:00.806977 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18857): Terminated: ok {rc=0} 19:25:00.906082 bus /gobi_0: Setting Powered False 19:25:02.033985 bus /gobi_0: Setting Powered False 19:25:03.146625 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18855): Process ended prematurely: osmo-stp_10.42.42.5(pid=18855) [trial-2381↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18855)]