Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=19456): Process ended prematurely: osmo-stp_10.42.42.5(pid=19456) [trial-2381↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19456)]
Standard Output
---------------------------------------------- trial-2381 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 19:33:26.772251 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:33:26.783738 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 19:33:26.953354 tst cs_paging_gprs_active.py: using LAC 31016 19:33:27.079785 tst cs_paging_gprs_active.py: using RAC 161 19:33:27.206907 tst cs_paging_gprs_active.py: using CellId 31016 19:33:27.334184 tst cs_paging_gprs_active.py: using BVCI 31017 19:33:27.359176 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:33:27.370549 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:33:27.381642 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:33:27.393223 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:33:27.404722 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:33:27.416465 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:33:27.428176 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:33:27.439723 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:33:27.451452 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 19:33:27.568754 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 19:33:27.865230 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:33:28.001265 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:33:28.338323 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19446): Launched 19:33:28.619728 run iperf3-srv_10.42.42.10(pid=19447): Launched 19:33:28.819085 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:33:28.955489 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:33:29.294149 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19448): Launched 19:33:29.573853 run iperf3-srv_10.42.42.10(pid=19449): Launched 19:33:29.772912 tst cs_paging_gprs_active.py:38: start network... 19:33:29.909316 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:33:30.419201 run create_hlr_db(pid=19450): Launched 19:33:30.601202 bus /gobi_6: Setting Powered False 19:33:31.687189 run create_hlr_db(pid=19450): Terminated: ok {rc=0} 19:33:32.173038 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19452): Launched 19:33:32.476842 run osmo-hlr_10.42.42.2(pid=19453): Launched 19:33:32.596917 run osmo-stp_10.42.42.5: Starting osmo-stp 19:33:33.128564 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19455): Launched 19:33:33.430723 run osmo-stp_10.42.42.5(pid=19456): Launched 19:33:33.540532 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:33:34.070211 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19458): Launched 19:33:34.177592 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:33:34.442158 run patchelf(pid=19459): Launched 19:33:34.619652 run osmo-stp_10.42.42.5(pid=19456): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19456)] 19:33:34.749261 run osmo-stp_10.42.42.5(pid=19456): stdout: | (launched: 2022-12-12_19:33:33.281711) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:33:34.878936 run osmo-stp_10.42.42.5(pid=19456): stderr: | �[0;m�[38;5;43m20221212193333451 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212193333451 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212193333452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212193333452 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212193333453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212193333453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212193333453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:33:35.004348 run osmo-stp_10.42.42.5(pid=19456): stdout: | (launched: 2022-12-12_19:33:33.281711) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:33:35.128575 run osmo-stp_10.42.42.5(pid=19456): stderr: | �[0;m�[38;5;43m20221212193333451 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212193333451 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212193333452 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212193333452 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212193333453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212193333453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212193333453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:33:35.273821 run patchelf(pid=19459): Terminating (SIGINT) 19:33:35.443619 run patchelf(pid=19459): Terminated: ok {rc=0} 19:33:35.474662 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=19456): Process ended prematurely: osmo-stp_10.42.42.5(pid=19456) [trial-2381↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19456)] [trial-2381↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 19:33:35.483842 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 19:33:35.543868 run osmo-hlr_10.42.42.2(pid=19453): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19453)] 19:33:35.593028 run osmo-hlr_10.42.42.2(pid=19453): stdout: | (launched: 2022-12-12_19:33:32.327966) 19:33:35.642739 run osmo-hlr_10.42.42.2(pid=19453): stderr: | �[0;m�[1;31m20221212193332502 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212193332502 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212193332502 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212193332502 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212193332502 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212193332502 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212193332515 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212193332523 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212193332524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212193332524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:33:35.684872 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19446): Terminating (SIGTERM) 19:33:35.724491 run iperf3-srv_10.42.42.10(pid=19447): Terminating (SIGTERM) 19:33:35.764059 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19448): Terminating (SIGTERM) 19:33:35.803581 run iperf3-srv_10.42.42.10(pid=19449): Terminating (SIGTERM) 19:33:35.843162 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19452): Terminating (SIGTERM) 19:33:35.882676 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19455): Terminating (SIGTERM) 19:33:35.922230 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19458): Terminating (SIGTERM) 19:33:35.931356 --- ParallelTerminationStrategy: PID 19446 died... 19:33:35.984893 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19446): Terminated: ok {rc=0} 19:33:35.994480 --- ParallelTerminationStrategy: PID 19447 died... 19:33:36.047537 run iperf3-srv_10.42.42.10(pid=19447): Terminated {rc=256} 19:33:36.057131 --- ParallelTerminationStrategy: PID 19448 died... 19:33:36.110441 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19448): Terminated: ok {rc=0} 19:33:36.119993 --- ParallelTerminationStrategy: PID 19449 died... 19:33:36.173310 run iperf3-srv_10.42.42.10(pid=19449): Terminated {rc=256} 19:33:36.182815 --- ParallelTerminationStrategy: PID 19452 died... 19:33:36.235687 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19452): Terminated: ok {rc=0} 19:33:36.245278 --- ParallelTerminationStrategy: PID 19455 died... 19:33:36.298708 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19455): Terminated: ok {rc=0} 19:33:36.308174 --- ParallelTerminationStrategy: PID 19458 died... 19:33:36.361191 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19458): Terminated: ok {rc=0} 19:33:36.449880 bus /gobi_0: Setting Powered False 19:33:37.553270 bus /gobi_0: Setting Powered False 19:33:38.659368 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19456): Process ended prematurely: osmo-stp_10.42.42.5(pid=19456) [trial-2381↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19456)]