Failed
gprs:trx-b200.ping.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=19360): Process ended prematurely: osmo-stp_10.42.42.5(pid=19360) [trial-2381↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19360)]
Standard Output
---------------------------------------------- trial-2381 gprs:trx-b200 ping.py ---------------------------------------------- 19:32:09.304598 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 19:32:09.315647 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 19:32:09.451043 tst ping.py: using LAC 31009 19:32:09.575342 tst ping.py: using RAC 154 19:32:09.701432 tst ping.py: using CellId 31009 19:32:09.820611 tst ping.py: using BVCI 31010 19:32:09.843226 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 19:32:09.853745 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 19:32:09.864065 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 19:32:09.874439 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 19:32:09.884676 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 19:32:09.895596 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 19:32:09.906079 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 19:32:09.916391 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 19:32:10.203566 tst ping.py:19: start network... 19:32:10.336749 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:32:10.837966 run create_hlr_db(pid=19354): Launched 19:32:11.022436 bus /gobi_6: Setting Powered False 19:32:12.043759 run create_hlr_db(pid=19354): Terminated: ok {rc=0} 19:32:12.442646 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19356): Launched 19:32:12.740489 run osmo-hlr_10.42.42.2(pid=19357): Launched 19:32:12.850333 run osmo-stp_10.42.42.5: Starting osmo-stp 19:32:13.369165 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19359): Launched 19:32:13.669075 run osmo-stp_10.42.42.5(pid=19360): Launched 19:32:13.777521 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:32:14.293181 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19362): Launched 19:32:14.398271 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:32:14.657516 run patchelf(pid=19363): Launched 19:32:14.831355 run osmo-stp_10.42.42.5(pid=19360): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19360)] 19:32:14.958277 run osmo-stp_10.42.42.5(pid=19360): stdout: | (launched: 2022-12-12_19:32:13.519790) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:32:15.086083 run osmo-stp_10.42.42.5(pid=19360): stderr: | �[0;m�[38;5;43m20221212193213687 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212193213687 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212193213688 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212193213688 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212193213689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212193213689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212193213689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:32:15.208575 run osmo-stp_10.42.42.5(pid=19360): stdout: | (launched: 2022-12-12_19:32:13.519790) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:32:15.330296 run osmo-stp_10.42.42.5(pid=19360): stderr: | �[0;m�[38;5;43m20221212193213687 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212193213687 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212193213688 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212193213688 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212193213689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212193213689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212193213689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:32:15.471636 run patchelf(pid=19363): Terminating (SIGINT) 19:32:15.637676 run patchelf(pid=19363): Terminated: ok {rc=0} 19:32:15.667907 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=19360): Process ended prematurely: osmo-stp_10.42.42.5(pid=19360) [trial-2381↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19360)] [trial-2381↪gprs:trx-b200↪ping.py:22] 19:32:15.676459 tst ping.py:22: Test FAILED (6.4 sec) 19:32:15.736029 run osmo-hlr_10.42.42.2(pid=19357): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:trx-b200↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19357)] 19:32:15.784741 run osmo-hlr_10.42.42.2(pid=19357): stdout: | (launched: 2022-12-12_19:32:12.593640) 19:32:15.834784 run osmo-hlr_10.42.42.2(pid=19357): stderr: | �[0;m�[1;31m20221212193212767 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212193212767 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212193212767 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212193212767 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212193212767 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212193212767 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212193212779 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:trx-b200/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212193212788 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212193212788 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212193212788 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:32:15.877749 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19356): Terminating (SIGTERM) 19:32:15.923122 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19359): Terminating (SIGTERM) 19:32:15.964014 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19362): Terminating (SIGTERM) 19:32:15.973212 --- ParallelTerminationStrategy: PID 19356 died... 19:32:16.026990 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19356): Terminated: ok {rc=0} 19:32:16.036902 --- ParallelTerminationStrategy: PID 19359 died... 19:32:16.090517 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19359): Terminated: ok {rc=0} 19:32:16.100404 --- ParallelTerminationStrategy: PID 19362 died... 19:32:16.154045 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19362): Terminated: ok {rc=0} 19:32:16.239506 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19360): Process ended prematurely: osmo-stp_10.42.42.5(pid=19360) [trial-2381↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19360)]