Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=21765): Process ended prematurely: osmo-stp_10.42.42.5(pid=21765) [trial-2381↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21765)]
Standard Output
---------------------------------------------- trial-2381 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 19:58:29.066996 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:58:29.078500 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 19:58:29.219002 tst cs_paging_gprs_active.py: using LAC 31149 19:58:29.339497 tst cs_paging_gprs_active.py: using RAC 39 19:58:29.460643 tst cs_paging_gprs_active.py: using CellId 31149 19:58:29.579614 tst cs_paging_gprs_active.py: using BVCI 31150 19:58:29.602936 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:58:29.613914 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:58:29.624498 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:58:29.635239 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:58:29.645804 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:58:29.656608 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:58:29.667442 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:58:29.677974 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:58:29.688747 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 19:58:29.807644 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 19:58:30.084681 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:58:30.210752 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:58:30.525082 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21755): Launched 19:58:30.787523 run iperf3-srv_10.42.42.10(pid=21756): Launched 19:58:30.997641 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:58:31.125036 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:58:31.458378 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21757): Launched 19:58:31.738216 run iperf3-srv_10.42.42.10(pid=21758): Launched 19:58:31.924786 tst cs_paging_gprs_active.py:38: start network... 19:58:32.051875 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:58:32.537231 run create_hlr_db(pid=21759): Launched 19:58:32.710429 bus /gobi_6: Setting Powered False 19:58:33.731474 run create_hlr_db(pid=21759): Terminated: ok {rc=0} 19:58:34.164531 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21761): Launched 19:58:34.490988 run osmo-hlr_10.42.42.2(pid=21762): Launched 19:58:34.608731 run osmo-stp_10.42.42.5: Starting osmo-stp 19:58:35.174658 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21764): Launched 19:58:35.501430 run osmo-stp_10.42.42.5(pid=21765): Launched 19:58:35.621317 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:58:36.189105 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21767): Launched 19:58:36.304921 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:58:36.590970 run patchelf(pid=21768): Launched 19:58:36.782907 run osmo-stp_10.42.42.5(pid=21765): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21765)] 19:58:36.922577 run osmo-stp_10.42.42.5(pid=21765): stdout: | (launched: 2022-12-12_19:58:35.339398) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:58:37.062713 run osmo-stp_10.42.42.5(pid=21765): stderr: | �[0;m�[38;5;43m20221212195835530 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212195835530 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212195835530 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212195835530 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212195835531 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212195835531 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212195835531 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:58:37.197279 run osmo-stp_10.42.42.5(pid=21765): stdout: | (launched: 2022-12-12_19:58:35.339398) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:58:37.330785 run osmo-stp_10.42.42.5(pid=21765): stderr: | �[0;m�[38;5;43m20221212195835530 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212195835530 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212195835530 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212195835530 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212195835531 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212195835531 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212195835531 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:58:37.486236 run patchelf(pid=21768): Terminating (SIGINT) 19:58:37.668468 run patchelf(pid=21768): Terminated: ok {rc=0} 19:58:37.701989 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21765): Process ended prematurely: osmo-stp_10.42.42.5(pid=21765) [trial-2381↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21765)] [trial-2381↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 19:58:37.711851 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 19:58:37.776384 run osmo-hlr_10.42.42.2(pid=21762): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21762)] 19:58:37.829084 run osmo-hlr_10.42.42.2(pid=21762): stdout: | (launched: 2022-12-12_19:58:34.329331) 19:58:37.882037 run osmo-hlr_10.42.42.2(pid=21762): stderr: | �[0;m�[1;31m20221212195834527 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212195834527 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212195834527 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212195834527 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212195834527 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212195834527 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212195834540 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212195834550 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212195834550 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212195834550 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:58:37.927009 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21755): Terminating (SIGTERM) 19:58:37.969203 run iperf3-srv_10.42.42.10(pid=21756): Terminating (SIGTERM) 19:58:38.011730 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21757): Terminating (SIGTERM) 19:58:38.053688 run iperf3-srv_10.42.42.10(pid=21758): Terminating (SIGTERM) 19:58:38.096023 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21761): Terminating (SIGTERM) 19:58:38.138738 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21764): Terminating (SIGTERM) 19:58:38.180830 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21767): Terminating (SIGTERM) 19:58:38.190961 --- ParallelTerminationStrategy: PID 21755 died... 19:58:38.248328 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21755): Terminated: ok {rc=0} 19:58:38.258637 --- ParallelTerminationStrategy: PID 21756 died... 19:58:38.315696 run iperf3-srv_10.42.42.10(pid=21756): Terminated {rc=256} 19:58:38.325999 --- ParallelTerminationStrategy: PID 21757 died... 19:58:38.383230 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21757): Terminated: ok {rc=0} 19:58:38.393541 --- ParallelTerminationStrategy: PID 21758 died... 19:58:38.450398 run iperf3-srv_10.42.42.10(pid=21758): Terminated {rc=256} 19:58:38.460716 --- ParallelTerminationStrategy: PID 21761 died... 19:58:38.518069 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21761): Terminated: ok {rc=0} 19:58:38.528477 --- ParallelTerminationStrategy: PID 21764 died... 19:58:38.585643 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21764): Terminated: ok {rc=0} 19:58:38.596132 --- ParallelTerminationStrategy: PID 21767 died... 19:58:38.653081 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21767): Terminated: ok {rc=0} 19:58:38.740757 bus /gobi_0: Setting Powered False 19:58:39.849357 bus /gobi_0: Setting Powered False 19:58:40.962568 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21765): Process ended prematurely: osmo-stp_10.42.42.5(pid=21765) [trial-2381↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21765)]