Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms.ping.py (from gprs_trx-lms)

Failing for the past 55 builds (Since #2327 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=21737): Process ended prematurely: osmo-stp_10.42.42.5(pid=21737) [trial-2381↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21737)]

Standard Output

----------------------------------------------
trial-2381 gprs:trx-lms ping.py
----------------------------------------------
19:58:11.591939 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
19:58:11.603231 tst                     gprs:trx-lms: Using 1 x bts (candidates: 1)
19:58:11.738796 tst                          ping.py: using LAC 31147
19:58:11.862143 tst                          ping.py: using RAC 37
19:58:11.986244 tst                          ping.py: using CellId 31147
19:58:12.111294 tst                          ping.py: using BVCI 31148
19:58:12.135759 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
19:58:12.146962 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
19:58:12.157986 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
19:58:12.169266 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
19:58:12.180385 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
19:58:12.191462 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
19:58:12.202717 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
19:58:12.213922 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
19:58:12.486375 tst                       ping.py:19: start network...
19:58:12.608493 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
19:58:13.084653 run         create_hlr_db(pid=21731): Launched
19:58:13.254632 bus                          /gobi_6: Setting Powered False
19:58:14.277157 run         create_hlr_db(pid=21731): Terminated: ok {rc=0}
19:58:14.702286 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21733): Launched
19:58:15.021022 run   osmo-hlr_10.42.42.2(pid=21734): Launched
19:58:15.140932 run              osmo-stp_10.42.42.5: Starting osmo-stp
19:58:15.700864 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21736): Launched
19:58:16.124680 run   osmo-stp_10.42.42.5(pid=21737): Launched
19:58:16.308009 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
19:58:16.935525 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21739): Launched
19:58:17.044853 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
19:58:17.309975 run              patchelf(pid=21740): Launched
19:58:17.484036 run   osmo-stp_10.42.42.5(pid=21737): ERR: Terminated: ERROR {rc=1}  [trial-2381↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21737)]
19:58:17.612097 run   osmo-stp_10.42.42.5(pid=21737): stdout: 
| (launched: 2022-12-12_19:58:15.867019)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:58:17.739951 run   osmo-stp_10.42.42.5(pid=21737): stderr: 
| �[0;m�[38;5;43m20221212195816203 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212195816203 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212195816203 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212195816204 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212195816204 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212195816204 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212195816204 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:58:17.862852 run   osmo-stp_10.42.42.5(pid=21737): stdout: 
| (launched: 2022-12-12_19:58:15.867019)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:58:17.984332 run   osmo-stp_10.42.42.5(pid=21737): stderr: 
| �[0;m�[38;5;43m20221212195816203 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212195816203 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212195816203 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212195816204 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212195816204 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212195816204 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212195816204 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:58:18.125731 run              patchelf(pid=21740): Terminating (SIGINT)
19:58:18.291283 run              patchelf(pid=21740): Terminated: ok {rc=0}
19:58:18.321638 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=21737): Process ended prematurely: osmo-stp_10.42.42.5(pid=21737) [trial-2381↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21737)]  [trial-2381↪gprs:trx-lms↪ping.py:22]
19:58:18.330387 tst                       ping.py:22: Test FAILED (6.7 sec)
19:58:18.391202 run   osmo-hlr_10.42.42.2(pid=21734): ERR: Terminated: ERROR {rc=237}  [trial-2381↪gprs:trx-lms↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21734)]
19:58:18.441162 run   osmo-hlr_10.42.42.2(pid=21734): stdout: 
| (launched: 2022-12-12_19:58:14.863727) 
19:58:18.491596 run   osmo-hlr_10.42.42.2(pid=21734): stderr: 
| �[0;m�[1;31m20221212195815061 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212195815061 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212195815061 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212195815061 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212195815061 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212195815061 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212195815073 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:trx-lms/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212195815082 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212195815082 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212195815082 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
19:58:18.534303 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21733): Terminating (SIGTERM)
19:58:18.574678 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21736): Terminating (SIGTERM)
19:58:18.614966 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21739): Terminating (SIGTERM)
19:58:18.624289 ---      ParallelTerminationStrategy: PID 21733 died...
19:58:18.678261 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21733): Terminated: ok {rc=0}
19:58:18.687997 ---      ParallelTerminationStrategy: PID 21736 died...
19:58:18.742204 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21736): Terminated: ok {rc=0}
19:58:18.751856 ---      ParallelTerminationStrategy: PID 21739 died...
19:58:18.805200 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21739): Terminated: ok {rc=0}
19:58:18.895263 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21737): Process ended prematurely: osmo-stp_10.42.42.5(pid=21737) [trial-2381↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21737)]