Skip to content

Failed

gprs:trx-umtrx.ping.py (from gprs_trx-umtrx)

Failing for the past 182 builds (Since #2200 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=20834): Process ended prematurely: osmo-stp_10.42.42.5(pid=20834) [trial-2381↪gprs:trx-umtrx↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20834)]

Standard Output

----------------------------------------------
trial-2381 gprs:trx-umtrx ping.py
----------------------------------------------
19:49:20.186815 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
19:49:20.198194 tst                   gprs:trx-umtrx: Using 1 x bts (candidates: 1)
19:49:20.332442 tst                          ping.py: using LAC 31100
19:49:20.449491 tst                          ping.py: using RAC 245
19:49:20.567724 tst                          ping.py: using CellId 31100
19:49:20.686275 tst                          ping.py: using BVCI 31101
19:49:20.708857 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
19:49:20.719430 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
19:49:20.729966 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
19:49:20.740356 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
19:49:20.750679 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
19:49:20.761065 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
19:49:20.771499 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
19:49:20.782032 tst                   gprs:trx-umtrx: Using 1 x modem (candidates: 4)
19:49:21.071753 tst                       ping.py:19: start network...
19:49:21.206209 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
19:49:21.710419 run         create_hlr_db(pid=20828): Launched
19:49:21.896093 bus                          /gobi_6: Setting Powered False
19:49:22.918275 run         create_hlr_db(pid=20828): Terminated: ok {rc=0}
19:49:23.344393 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20830): Launched
19:49:23.665452 run   osmo-hlr_10.42.42.2(pid=20831): Launched
19:49:23.781693 run              osmo-stp_10.42.42.5: Starting osmo-stp
19:49:24.341646 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20833): Launched
19:49:24.663344 run   osmo-stp_10.42.42.5(pid=20834): Launched
19:49:24.779835 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
19:49:25.340364 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20836): Launched
19:49:25.454900 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
19:49:25.736618 run              patchelf(pid=20837): Launched
19:49:25.924204 run   osmo-stp_10.42.42.5(pid=20834): ERR: Terminated: ERROR {rc=1}  [trial-2381↪gprs:trx-umtrx↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20834)]
19:49:26.061239 run   osmo-stp_10.42.42.5(pid=20834): stdout: 
| (launched: 2022-12-12_19:49:24.504202)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:49:26.198376 run   osmo-stp_10.42.42.5(pid=20834): stderr: 
| �[0;m�[38;5;43m20221212194924693 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212194924693 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212194924693 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212194924694 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212194924694 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212194924694 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212194924694 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:49:26.331303 run   osmo-stp_10.42.42.5(pid=20834): stdout: 
| (launched: 2022-12-12_19:49:24.504202)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:49:26.462574 run   osmo-stp_10.42.42.5(pid=20834): stderr: 
| �[0;m�[38;5;43m20221212194924693 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212194924693 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212194924693 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212194924694 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212194924694 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212194924694 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212194924694 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:49:26.615533 run              patchelf(pid=20837): Terminating (SIGINT)
19:49:26.794704 run              patchelf(pid=20837): Terminated: ok {rc=0}
19:49:26.827114 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=20834): Process ended prematurely: osmo-stp_10.42.42.5(pid=20834) [trial-2381↪gprs:trx-umtrx↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20834)]  [trial-2381↪gprs:trx-umtrx↪ping.py:22]
19:49:26.836292 tst                       ping.py:22: Test FAILED (6.6 sec)
19:49:26.901241 run   osmo-hlr_10.42.42.2(pid=20831): ERR: Terminated: ERROR {rc=237}  [trial-2381↪gprs:trx-umtrx↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20831)]
19:49:26.953860 run   osmo-hlr_10.42.42.2(pid=20831): stdout: 
| (launched: 2022-12-12_19:49:23.506410) 
19:49:27.006955 run   osmo-hlr_10.42.42.2(pid=20831): stderr: 
| �[0;m�[1;31m20221212194923701 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212194923701 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212194923701 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212194923701 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212194923701 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212194923701 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212194923714 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:trx-umtrx/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212194923722 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212194923722 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212194923723 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
19:49:27.051520 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20830): Terminating (SIGTERM)
19:49:27.094231 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20833): Terminating (SIGTERM)
19:49:27.136636 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20836): Terminating (SIGTERM)
19:49:27.146896 ---      ParallelTerminationStrategy: PID 20830 died...
19:49:27.204092 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20830): Terminated: ok {rc=0}
19:49:27.214583 ---      ParallelTerminationStrategy: PID 20833 died...
19:49:27.271913 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20833): Terminated: ok {rc=0}
19:49:27.282254 ---      ParallelTerminationStrategy: PID 20836 died...
19:49:27.339351 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20836): Terminated: ok {rc=0}
19:49:27.426692 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20834): Process ended prematurely: osmo-stp_10.42.42.5(pid=20834) [trial-2381↪gprs:trx-umtrx↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20834)]