Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=26871): Process ended prematurely: osmo-stp_10.42.42.5(pid=26871) [trial-2382↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26871)]
Standard Output
---------------------------------------------- trial-2382 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 20:59:20.381623 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:59:20.392783 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 20:59:20.543280 tst cs_paging_gprs_active.py: using LAC 31467 20:59:20.681225 tst cs_paging_gprs_active.py: using RAC 102 20:59:20.814075 tst cs_paging_gprs_active.py: using CellId 31467 20:59:20.943799 tst cs_paging_gprs_active.py: using BVCI 31468 20:59:20.968254 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:59:20.979068 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:59:20.989638 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:59:21.000119 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:59:21.010510 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:59:21.021032 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:59:21.031639 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:59:21.042213 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:59:21.052860 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 20:59:21.175772 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 20:59:21.465753 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:59:21.599177 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:59:21.928512 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26861): Launched 20:59:22.201757 run iperf3-srv_10.42.42.10(pid=26862): Launched 20:59:22.397787 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:59:22.531419 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:59:22.861144 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26863): Launched 20:59:23.134026 run iperf3-srv_10.42.42.10(pid=26864): Launched 20:59:23.327306 tst cs_paging_gprs_active.py:38: start network... 20:59:23.459967 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:59:23.968206 run create_hlr_db(pid=26865): Launched 20:59:24.151899 bus /sierra_2: Setting Powered False 20:59:25.172922 run create_hlr_db(pid=26865): Terminated: ok {rc=0} 20:59:25.621511 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26867): Launched 20:59:25.939078 run osmo-hlr_10.42.42.2(pid=26868): Launched 20:59:26.065457 run osmo-stp_10.42.42.5: Starting osmo-stp 20:59:26.622256 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26870): Launched 20:59:26.940059 run osmo-stp_10.42.42.5(pid=26871): Launched 20:59:27.054481 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:59:27.606037 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26873): Launched 20:59:27.719752 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:59:27.997453 run patchelf(pid=26874): Launched 20:59:28.183243 run osmo-stp_10.42.42.5(pid=26871): ERR: Terminated: ERROR {rc=1} [trial-2382↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26871)] 20:59:28.318857 run osmo-stp_10.42.42.5(pid=26871): stdout: | (launched: 2022-12-12_20:59:26.785574) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:59:28.454739 run osmo-stp_10.42.42.5(pid=26871): stderr: | �[0;m�[38;5;43m20221212205926957 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212205926957 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212205926957 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212205926958 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212205926958 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212205926958 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212205926958 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:59:28.586140 run osmo-stp_10.42.42.5(pid=26871): stdout: | (launched: 2022-12-12_20:59:26.785574) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:59:28.716157 run osmo-stp_10.42.42.5(pid=26871): stderr: | �[0;m�[38;5;43m20221212205926957 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212205926957 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212205926957 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212205926958 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212205926958 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212205926958 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212205926958 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:59:28.868156 run patchelf(pid=26874): Terminating (SIGINT) 20:59:29.046508 run patchelf(pid=26874): Terminated: ok {rc=0} 20:59:29.079208 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26871): Process ended prematurely: osmo-stp_10.42.42.5(pid=26871) [trial-2382↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26871)] [trial-2382↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 20:59:29.088621 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 20:59:29.150213 run osmo-hlr_10.42.42.2(pid=26868): ERR: Terminated: ERROR {rc=237} [trial-2382↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26868)] 20:59:29.200375 run osmo-hlr_10.42.42.2(pid=26868): stdout: | (launched: 2022-12-12_20:59:25.782273) 20:59:29.251433 run osmo-hlr_10.42.42.2(pid=26868): stderr: | �[0;m�[1;31m20221212205925959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212205925959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212205925959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212205925959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212205925959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212205925959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212205925971 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2382/run.2022-12-12_20-36-34/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212205925981 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212205925982 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212205925982 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:59:29.294860 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26861): Terminating (SIGTERM) 20:59:29.336019 run iperf3-srv_10.42.42.10(pid=26862): Terminating (SIGTERM) 20:59:29.377352 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26863): Terminating (SIGTERM) 20:59:29.418258 run iperf3-srv_10.42.42.10(pid=26864): Terminating (SIGTERM) 20:59:29.459344 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26867): Terminating (SIGTERM) 20:59:29.500445 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26870): Terminating (SIGTERM) 20:59:29.541652 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26873): Terminating (SIGTERM) 20:59:29.551120 --- ParallelTerminationStrategy: PID 26861 died... 20:59:29.606880 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26861): Terminated: ok {rc=0} 20:59:29.616718 --- ParallelTerminationStrategy: PID 26862 died... 20:59:29.671269 run iperf3-srv_10.42.42.10(pid=26862): Terminated {rc=256} 20:59:29.681062 --- ParallelTerminationStrategy: PID 26863 died... 20:59:29.735316 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26863): Terminated: ok {rc=0} 20:59:29.745127 --- ParallelTerminationStrategy: PID 26864 died... 20:59:29.799388 run iperf3-srv_10.42.42.10(pid=26864): Terminated {rc=256} 20:59:29.809204 --- ParallelTerminationStrategy: PID 26867 died... 20:59:29.863528 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26867): Terminated: ok {rc=0} 20:59:29.873357 --- ParallelTerminationStrategy: PID 26870 died... 20:59:29.927476 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26870): Terminated: ok {rc=0} 20:59:29.937296 --- ParallelTerminationStrategy: PID 26873 died... 20:59:29.992637 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26873): Terminated: ok {rc=0} 20:59:30.084632 bus /gobi_0: Setting Powered False 20:59:31.195816 bus /gobi_0: Setting Powered False 20:59:32.309185 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26871): Process ended prematurely: osmo-stp_10.42.42.5(pid=26871) [trial-2382↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26871)]