Failed
gprs:trx-lms-limenet-micro.iperf3.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=30464): Process ended prematurely: osmo-stp_10.42.42.5(pid=30464) [trial-2382↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30464)]
Standard Output
---------------------------------------------- trial-2382 gprs:trx-lms-limenet-micro iperf3.py ---------------------------------------------- 21:34:38.091520 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:34:38.104010 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 21:34:38.255127 tst iperf3.py: using LAC 31648 21:34:38.389846 tst iperf3.py: using RAC 28 21:34:38.526267 tst iperf3.py: using CellId 31648 21:34:38.662081 tst iperf3.py: using BVCI 31649 21:34:38.688423 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:34:38.699972 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:34:38.711359 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:34:38.723561 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:34:38.735111 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:34:38.746497 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:34:38.758314 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:34:38.769885 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:34:38.781602 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 21:34:39.074620 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 21:34:39.208769 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:34:39.543869 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30456): Launched 21:34:39.823297 run iperf3-srv_10.42.42.10(pid=30457): Launched 21:34:40.019160 tst iperf3.py:8: start network... 21:34:40.152814 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:34:40.669395 run create_hlr_db(pid=30458): Launched 21:34:40.854867 bus /gobi_6: Setting Powered False 21:34:41.874669 run create_hlr_db(pid=30458): Terminated: ok {rc=0} 21:34:42.330559 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30460): Launched 21:34:42.678055 run osmo-hlr_10.42.42.2(pid=30461): Launched 21:34:42.804708 run osmo-stp_10.42.42.5: Starting osmo-stp 21:34:43.403757 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30463): Launched 21:34:43.749009 run osmo-stp_10.42.42.5(pid=30464): Launched 21:34:43.874601 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:34:44.474829 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30466): Launched 21:34:44.597574 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:34:44.899391 run patchelf(pid=30467): Launched 21:34:45.099041 run osmo-stp_10.42.42.5(pid=30464): ERR: Terminated: ERROR {rc=1} [trial-2382↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30464)] 21:34:45.244753 run osmo-stp_10.42.42.5(pid=30464): stdout: | (launched: 2022-12-12_21:34:43.579037) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:34:45.391824 run osmo-stp_10.42.42.5(pid=30464): stderr: | �[0;m�[38;5;43m20221212213443776 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212213443776 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212213443777 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212213443777 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212213443779 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212213443780 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212213443780 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:34:45.533862 run osmo-stp_10.42.42.5(pid=30464): stdout: | (launched: 2022-12-12_21:34:43.579037) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:34:45.674474 run osmo-stp_10.42.42.5(pid=30464): stderr: | �[0;m�[38;5;43m20221212213443776 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212213443776 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212213443777 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212213443777 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212213443779 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212213443780 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212213443780 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:34:45.838745 run patchelf(pid=30467): Terminating (SIGINT) 21:34:46.041579 run patchelf(pid=30467): Terminated: ok {rc=0} 21:34:46.078035 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=30464): Process ended prematurely: osmo-stp_10.42.42.5(pid=30464) [trial-2382↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30464)] [trial-2382↪gprs:trx-lms-limenet-micro↪iperf3.py:8] 21:34:46.089436 tst iperf3.py:8: Test FAILED (8.0 sec) 21:34:46.159231 run osmo-hlr_10.42.42.2(pid=30461): ERR: Terminated: ERROR {rc=237} [trial-2382↪gprs:trx-lms-limenet-micro↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30461)] 21:34:46.214557 run osmo-hlr_10.42.42.2(pid=30461): stdout: | (launched: 2022-12-12_21:34:42.506959) 21:34:46.270824 run osmo-hlr_10.42.42.2(pid=30461): stderr: | �[0;m�[1;31m20221212213442709 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212213442709 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212213442709 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212213442709 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212213442709 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212213442710 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212213442725 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2382/run.2022-12-12_20-36-34/gprs:trx-lms-limenet-micro/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212213442736 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212213442736 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212213442736 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:34:46.318819 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30456): Terminating (SIGTERM) 21:34:46.366315 run iperf3-srv_10.42.42.10(pid=30457): Terminating (SIGTERM) 21:34:46.412485 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30460): Terminating (SIGTERM) 21:34:46.459030 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30463): Terminating (SIGTERM) 21:34:46.506124 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30466): Terminating (SIGTERM) 21:34:46.517521 --- ParallelTerminationStrategy: PID 30456 died... 21:34:46.581767 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30456): Terminated: ok {rc=0} 21:34:46.593390 --- ParallelTerminationStrategy: PID 30457 died... 21:34:46.654754 run iperf3-srv_10.42.42.10(pid=30457): Terminated {rc=256} 21:34:46.666312 --- ParallelTerminationStrategy: PID 30460 died... 21:34:46.727247 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30460): Terminated: ok {rc=0} 21:34:46.739047 --- ParallelTerminationStrategy: PID 30463 died... 21:34:46.800254 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30463): Terminated: ok {rc=0} 21:34:46.811904 --- ParallelTerminationStrategy: PID 30466 died... 21:34:46.873361 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30466): Terminated: ok {rc=0} 21:34:46.964195 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30464): Process ended prematurely: osmo-stp_10.42.42.5(pid=30464) [trial-2382↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30464)]