Failed
gprs:oc2g.iperf3.py (from gprs_oc2g)
Stacktrace
osmo-stp_10.42.42.5(pid=1755): Process ended prematurely: osmo-stp_10.42.42.5(pid=1755) [trial-2383↪gprs:oc2g↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1755)]
Standard Output
---------------------------------------------- trial-2383 gprs:oc2g iperf3.py ---------------------------------------------- 22:19:47.857875 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 22:19:47.868672 tst gprs:oc2g: Using 1 x bts (candidates: 1) 22:19:47.993522 tst iperf3.py: using LAC 31883 22:19:48.115688 tst iperf3.py: using RAC 8 22:19:48.240498 tst iperf3.py: using CellId 31883 22:19:48.362654 tst iperf3.py: using BVCI 31884 22:19:48.386522 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 22:19:48.396869 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 22:19:48.407223 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 22:19:48.417904 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 22:19:48.428048 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 22:19:48.438328 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 22:19:48.448660 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 22:19:48.458915 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 22:19:48.469245 tst gprs:oc2g: Using 1 x modem (candidates: 4) 22:19:48.768509 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 22:19:48.908510 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:19:49.253735 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1747): Launched 22:19:49.541812 run iperf3-srv_10.42.42.10(pid=1748): Launched 22:19:49.747807 tst iperf3.py:8: start network... 22:19:49.888030 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:19:50.414533 run create_hlr_db(pid=1749): Launched 22:19:50.604441 bus /gobi_6: Setting Powered False 22:19:51.617289 run create_hlr_db(pid=1749): Terminated: ok {rc=0} 22:19:52.035185 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1751): Launched 22:19:52.348356 run osmo-hlr_10.42.42.2(pid=1752): Launched 22:19:52.472218 run osmo-stp_10.42.42.5: Starting osmo-stp 22:19:53.054319 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1754): Launched 22:19:53.388530 run osmo-stp_10.42.42.5(pid=1755): Launched 22:19:53.509948 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:19:54.093264 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1757): Launched 22:19:54.212635 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:19:54.503327 run patchelf(pid=1758): Launched 22:19:54.698323 run osmo-stp_10.42.42.5(pid=1755): ERR: Terminated: ERROR {rc=1} [trial-2383↪gprs:oc2g↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1755)] 22:19:54.840026 run osmo-stp_10.42.42.5(pid=1755): stdout: | (launched: 2022-12-12_22:19:53.224481) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:19:54.982117 run osmo-stp_10.42.42.5(pid=1755): stderr: | �[0;m�[38;5;43m20221212221953419 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212221953419 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212221953419 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212221953420 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212221953420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212221953420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212221953420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:19:55.119751 run osmo-stp_10.42.42.5(pid=1755): stdout: | (launched: 2022-12-12_22:19:53.224481) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:19:55.256130 run osmo-stp_10.42.42.5(pid=1755): stderr: | �[0;m�[38;5;43m20221212221953419 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212221953419 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212221953419 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212221953420 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212221953420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212221953420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212221953420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:19:55.415738 run patchelf(pid=1758): Terminating (SIGINT) 22:19:55.603340 run patchelf(pid=1758): Terminated: ok {rc=0} 22:19:55.637456 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=1755): Process ended prematurely: osmo-stp_10.42.42.5(pid=1755) [trial-2383↪gprs:oc2g↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1755)] [trial-2383↪gprs:oc2g↪iperf3.py:8] 22:19:55.647368 tst iperf3.py:8: Test FAILED (7.8 sec) 22:19:55.711570 run osmo-hlr_10.42.42.2(pid=1752): ERR: Terminated: ERROR {rc=237} [trial-2383↪gprs:oc2g↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1752)] 22:19:55.763234 run osmo-hlr_10.42.42.2(pid=1752): stdout: | (launched: 2022-12-12_22:19:52.193445) 22:19:55.815472 run osmo-hlr_10.42.42.2(pid=1752): stderr: | �[0;m�[1;31m20221212221952371 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212221952371 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212221952371 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212221952371 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212221952371 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212221952371 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212221952383 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:oc2g/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212221952392 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212221952392 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212221952392 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:19:55.859582 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1747): Terminating (SIGTERM) 22:19:55.901598 run iperf3-srv_10.42.42.10(pid=1748): Terminating (SIGTERM) 22:19:55.943877 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1751): Terminating (SIGTERM) 22:19:55.985539 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1754): Terminating (SIGTERM) 22:19:56.027603 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1757): Terminating (SIGTERM) 22:19:56.037741 --- ParallelTerminationStrategy: PID 1747 died... 22:19:56.094302 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1747): Terminated: ok {rc=0} 22:19:56.104468 --- ParallelTerminationStrategy: PID 1748 died... 22:19:56.160268 run iperf3-srv_10.42.42.10(pid=1748): Terminated {rc=256} 22:19:56.170348 --- ParallelTerminationStrategy: PID 1751 died... 22:19:56.226046 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1751): Terminated: ok {rc=0} 22:19:56.236404 --- ParallelTerminationStrategy: PID 1754 died... 22:19:56.292019 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1754): Terminated: ok {rc=0} 22:19:56.302520 --- ParallelTerminationStrategy: PID 1757 died... 22:19:56.358505 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1757): Terminated: ok {rc=0} 22:19:56.445616 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1755): Process ended prematurely: osmo-stp_10.42.42.5(pid=1755) [trial-2383↪gprs:oc2g↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1755)]