Failed
gprs:sysmo.ping.py (from gprs_sysmo)
Stacktrace
osmo-stp_10.42.42.5(pid=1225): Process ended prematurely: osmo-stp_10.42.42.5(pid=1225) [trial-2383↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1225)]
Standard Output
---------------------------------------------- trial-2383 gprs:sysmo ping.py ---------------------------------------------- 22:12:20.608274 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 22:12:20.620253 tst gprs:sysmo: Using 1 x bts (candidates: 1) 22:12:20.747877 tst ping.py: using LAC 31843 22:12:20.869778 tst ping.py: using RAC 223 22:12:20.988776 tst ping.py: using CellId 31843 22:12:21.110445 tst ping.py: using BVCI 31844 22:12:21.133823 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 22:12:21.144162 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 22:12:21.154548 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 22:12:21.165050 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 22:12:21.175211 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 22:12:21.185531 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 22:12:21.195864 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 22:12:21.206269 tst gprs:sysmo: Using 1 x modem (candidates: 4) 22:12:21.484301 tst ping.py:19: start network... 22:12:21.610973 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:12:22.099489 run create_hlr_db(pid=1219): Launched 22:12:22.274934 bus /gobi_6: Setting Powered False 22:12:23.295349 run create_hlr_db(pid=1219): Terminated: ok {rc=0} 22:12:23.727935 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1221): Launched 22:12:24.053435 run osmo-hlr_10.42.42.2(pid=1222): Launched 22:12:24.176142 run osmo-stp_10.42.42.5: Starting osmo-stp 22:12:24.741349 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1224): Launched 22:12:25.065820 run osmo-stp_10.42.42.5(pid=1225): Launched 22:12:25.184451 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:12:25.754591 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1227): Launched 22:12:25.870606 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:12:26.155597 run patchelf(pid=1228): Launched 22:12:26.347201 run osmo-stp_10.42.42.5(pid=1225): ERR: Terminated: ERROR {rc=1} [trial-2383↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1225)] 22:12:26.487952 run osmo-stp_10.42.42.5(pid=1225): stdout: | (launched: 2022-12-12_22:12:24.906244) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:12:26.628174 run osmo-stp_10.42.42.5(pid=1225): stderr: | �[0;m�[38;5;43m20221212221225100 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212221225100 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212221225100 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212221225100 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212221225101 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212221225101 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212221225101 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:12:26.763634 run osmo-stp_10.42.42.5(pid=1225): stdout: | (launched: 2022-12-12_22:12:24.906244) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:12:26.897860 run osmo-stp_10.42.42.5(pid=1225): stderr: | �[0;m�[38;5;43m20221212221225100 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212221225100 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212221225100 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212221225100 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212221225101 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212221225101 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212221225101 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:12:27.055174 run patchelf(pid=1228): Terminating (SIGINT) 22:12:27.240038 run patchelf(pid=1228): Terminated: ok {rc=0} 22:12:27.273387 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=1225): Process ended prematurely: osmo-stp_10.42.42.5(pid=1225) [trial-2383↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1225)] [trial-2383↪gprs:sysmo↪ping.py:22] 22:12:27.282597 tst ping.py:22: Test FAILED (6.7 sec) 22:12:27.346186 run osmo-hlr_10.42.42.2(pid=1222): ERR: Terminated: ERROR {rc=237} [trial-2383↪gprs:sysmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1222)] 22:12:27.398300 run osmo-hlr_10.42.42.2(pid=1222): stdout: | (launched: 2022-12-12_22:12:23.893731) 22:12:27.451514 run osmo-hlr_10.42.42.2(pid=1222): stderr: | �[0;m�[1;31m20221212221224093 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212221224093 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212221224093 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212221224093 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212221224093 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212221224093 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212221224104 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:sysmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212221224113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212221224113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212221224113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:12:27.496431 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1221): Terminating (SIGTERM) 22:12:27.539111 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1224): Terminating (SIGTERM) 22:12:27.582134 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1227): Terminating (SIGTERM) 22:12:27.592183 --- ParallelTerminationStrategy: PID 1221 died... 22:12:27.649571 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1221): Terminated: ok {rc=0} 22:12:27.662614 --- ParallelTerminationStrategy: PID 1224 died... 22:12:27.719600 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1224): Terminated: ok {rc=0} 22:12:27.730588 --- ParallelTerminationStrategy: PID 1227 died... 22:12:27.787843 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1227): Terminated: ok {rc=0} 22:12:27.875145 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1225): Process ended prematurely: osmo-stp_10.42.42.5(pid=1225) [trial-2383↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1225)]