Failed
gprs:oc2g.iperf3.py (from gprs_oc2g)
Stacktrace
osmo-stp_10.42.42.5(pid=11300): Process ended prematurely: osmo-stp_10.42.42.5(pid=11300) [trial-2384↪gprs:oc2g↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11300)]
Standard Output
---------------------------------------------- trial-2384 gprs:oc2g iperf3.py ---------------------------------------------- 00:23:52.495009 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:23:52.506517 tst gprs:oc2g: Using 1 x bts (candidates: 1) 00:23:52.635230 tst iperf3.py: using LAC 32344 00:23:52.756433 tst iperf3.py: using RAC 214 00:23:52.877228 tst iperf3.py: using CellId 32344 00:23:52.998420 tst iperf3.py: using BVCI 32345 00:23:53.022669 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:23:53.034096 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:23:53.045382 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:23:53.057646 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:23:53.069315 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:23:53.082151 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:23:53.093212 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:23:53.104380 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:23:53.115809 tst gprs:oc2g: Using 1 x modem (candidates: 4) 00:23:53.401324 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 00:23:53.532856 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:23:53.877429 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11292): Launched 00:23:54.164898 run iperf3-srv_10.42.42.10(pid=11293): Launched 00:23:54.360328 tst iperf3.py:8: start network... 00:23:54.493682 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:23:55.033484 run create_hlr_db(pid=11294): Launched 00:23:55.229868 bus /gobi_6: Setting Powered False 00:23:56.255289 run create_hlr_db(pid=11294): Terminated: ok {rc=0} 00:23:56.721533 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11296): Launched 00:23:57.164649 run osmo-hlr_10.42.42.2(pid=11297): Launched 00:23:57.416004 run osmo-stp_10.42.42.5: Starting osmo-stp 00:23:58.020047 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11299): Launched 00:23:58.461890 run osmo-stp_10.42.42.5(pid=11300): Launched 00:23:58.689841 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:23:59.289288 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11302): Launched 00:23:59.401592 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:23:59.690826 run patchelf(pid=11303): Launched 00:23:59.877158 run osmo-stp_10.42.42.5(pid=11300): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:oc2g↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11300)] 00:24:00.010772 run osmo-stp_10.42.42.5(pid=11300): stdout: | (launched: 2022-12-13_00:23:58.192634) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:24:00.144527 run osmo-stp_10.42.42.5(pid=11300): stderr: | �[0;m�[38;5;43m20221213002358492 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213002358492 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213002358492 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213002358493 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213002358493 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213002358493 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213002358493 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:24:00.274509 run osmo-stp_10.42.42.5(pid=11300): stdout: | (launched: 2022-12-13_00:23:58.192634) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:24:00.403303 run osmo-stp_10.42.42.5(pid=11300): stderr: | �[0;m�[38;5;43m20221213002358492 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213002358492 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213002358492 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213002358493 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213002358493 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213002358493 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213002358493 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:24:00.554009 run patchelf(pid=11303): Terminating (SIGINT) 00:24:00.731574 run patchelf(pid=11303): Terminated: ok {rc=0} 00:24:00.764538 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=11300): Process ended prematurely: osmo-stp_10.42.42.5(pid=11300) [trial-2384↪gprs:oc2g↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11300)] [trial-2384↪gprs:oc2g↪iperf3.py:8] 00:24:00.774379 tst iperf3.py:8: Test FAILED (8.3 sec) 00:24:00.836372 run osmo-hlr_10.42.42.2(pid=11297): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:oc2g↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11297)] 00:24:00.886944 run osmo-hlr_10.42.42.2(pid=11297): stdout: | (launched: 2022-12-13_00:23:56.895523) 00:24:00.945947 run osmo-hlr_10.42.42.2(pid=11297): stderr: | �[0;m�[1;31m20221213002357199 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213002357200 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213002357200 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213002357200 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213002357200 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213002357200 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213002357221 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:oc2g/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213002357234 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213002357234 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213002357235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:24:00.991081 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11292): Terminating (SIGTERM) 00:24:01.034697 run iperf3-srv_10.42.42.10(pid=11293): Terminating (SIGTERM) 00:24:01.077846 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11296): Terminating (SIGTERM) 00:24:01.121101 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11299): Terminating (SIGTERM) 00:24:01.163586 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11302): Terminating (SIGTERM) 00:24:01.175058 --- ParallelTerminationStrategy: PID 11292 died... 00:24:01.231513 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11292): Terminated: ok {rc=0} 00:24:01.241910 --- ParallelTerminationStrategy: PID 11293 died... 00:24:01.296501 run iperf3-srv_10.42.42.10(pid=11293): Terminated {rc=256} 00:24:01.306991 --- ParallelTerminationStrategy: PID 11296 died... 00:24:01.361968 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11296): Terminated: ok {rc=0} 00:24:01.372390 --- ParallelTerminationStrategy: PID 11299 died... 00:24:01.427293 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11299): Terminated: ok {rc=0} 00:24:01.437626 --- ParallelTerminationStrategy: PID 11302 died... 00:24:01.491878 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11302): Terminated: ok {rc=0} 00:24:01.586509 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11300): Process ended prematurely: osmo-stp_10.42.42.5(pid=11300) [trial-2384↪gprs:oc2g↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11300)]