Failed
gprs:trx-b200.ping.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=28889): Process ended prematurely: osmo-stp_10.42.42.5(pid=28889) [trial-2387↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28889)]
Standard Output
---------------------------------------------- trial-2387 gprs:trx-b200 ping.py ---------------------------------------------- 08:55:53.134514 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:53.146073 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 08:55:53.288001 tst ping.py: using LAC 32853 08:55:53.412791 tst ping.py: using RAC 213 08:55:53.535644 tst ping.py: using CellId 32853 08:55:53.660719 tst ping.py: using BVCI 32854 08:55:53.684693 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:53.695671 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:53.706546 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:53.717350 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:53.728607 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:53.739999 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:53.751862 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:53.763229 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 08:55:54.035582 tst ping.py:19: start network... 08:55:54.157033 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:55:54.615007 run create_hlr_db(pid=28883): Launched 08:55:54.782740 bus /gobi_6: Setting Powered False 08:55:55.803959 run create_hlr_db(pid=28883): Terminated: ok {rc=0} 08:55:56.216876 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28885): Launched 08:55:56.528594 run osmo-hlr_10.42.42.2(pid=28886): Launched 08:55:56.644277 run osmo-stp_10.42.42.5: Starting osmo-stp 08:55:57.189498 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28888): Launched 08:55:57.502023 run osmo-stp_10.42.42.5(pid=28889): Launched 08:55:57.616105 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:55:58.159980 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28891): Launched 08:55:58.270681 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:55:58.540678 run patchelf(pid=28892): Launched 08:55:58.722885 run osmo-stp_10.42.42.5(pid=28889): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28889)] 08:55:58.856493 run osmo-stp_10.42.42.5(pid=28889): stdout: | (launched: 2022-12-13_08:55:57.348241) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:55:58.989988 run osmo-stp_10.42.42.5(pid=28889): stderr: | �[0;m�[38;5;43m20221213085557541 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213085557541 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213085557541 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213085557542 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213085557542 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213085557542 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213085557542 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:55:59.119731 run osmo-stp_10.42.42.5(pid=28889): stdout: | (launched: 2022-12-13_08:55:57.348241) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:55:59.248491 run osmo-stp_10.42.42.5(pid=28889): stderr: | �[0;m�[38;5;43m20221213085557541 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213085557541 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213085557541 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213085557542 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213085557542 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213085557542 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213085557542 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:55:59.397634 run patchelf(pid=28892): Terminating (SIGINT) 08:55:59.571956 run patchelf(pid=28892): Terminated: ok {rc=0} 08:55:59.603873 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=28889): Process ended prematurely: osmo-stp_10.42.42.5(pid=28889) [trial-2387↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28889)] [trial-2387↪gprs:trx-b200↪ping.py:22] 08:55:59.612864 tst ping.py:22: Test FAILED (6.5 sec) 08:55:59.675085 run osmo-hlr_10.42.42.2(pid=28886): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:trx-b200↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28886)] 08:55:59.725871 run osmo-hlr_10.42.42.2(pid=28886): stdout: | (launched: 2022-12-13_08:55:56.375955) 08:55:59.777218 run osmo-hlr_10.42.42.2(pid=28886): stderr: | �[0;m�[1;31m20221213085556575 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213085556575 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213085556575 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213085556575 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213085556575 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213085556575 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213085556587 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:trx-b200/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213085556597 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213085556597 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213085556597 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:55:59.821408 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28885): Terminating (SIGTERM) 08:55:59.862918 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28888): Terminating (SIGTERM) 08:55:59.904089 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28891): Terminating (SIGTERM) 08:55:59.913680 --- ParallelTerminationStrategy: PID 28885 died... 08:55:59.968777 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28885): Terminated: ok {rc=0} 08:55:59.978769 --- ParallelTerminationStrategy: PID 28888 died... 08:56:00.033860 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28888): Terminated: ok {rc=0} 08:56:00.043801 --- ParallelTerminationStrategy: PID 28891 died... 08:56:00.099034 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28891): Terminated: ok {rc=0} 08:56:00.185358 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28889): Process ended prematurely: osmo-stp_10.42.42.5(pid=28889) [trial-2387↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28889)]