Failed
gprs:trx-lms-limenet-micro.iperf3.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=32327): Process ended prematurely: osmo-stp_10.42.42.5(pid=32327) [trial-2387↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32327)]
Standard Output
---------------------------------------------- trial-2387 gprs:trx-lms-limenet-micro iperf3.py ---------------------------------------------- 09:28:52.945113 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:28:52.956697 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 09:28:53.096270 tst iperf3.py: using LAC 33031 09:28:53.220738 tst iperf3.py: using RAC 136 09:28:53.345093 tst iperf3.py: using CellId 33031 09:28:53.469603 tst iperf3.py: using BVCI 33032 09:28:53.493925 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:28:53.505207 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:28:53.516156 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:28:53.527136 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:28:53.538084 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:28:53.549272 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:28:53.560419 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:28:53.571406 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:28:53.582532 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 09:28:53.873514 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 09:28:54.006848 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:28:54.335528 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32319): Launched 09:28:54.610254 run iperf3-srv_10.42.42.10(pid=32320): Launched 09:28:54.806803 tst iperf3.py:8: start network... 09:28:54.931977 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:28:55.400933 run create_hlr_db(pid=32321): Launched 09:28:55.572057 bus /gobi_6: Setting Powered False 09:28:56.593666 run create_hlr_db(pid=32321): Terminated: ok {rc=0} 09:28:56.989179 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32323): Launched 09:28:57.286625 run osmo-hlr_10.42.42.2(pid=32324): Launched 09:28:57.402150 run osmo-stp_10.42.42.5: Starting osmo-stp 09:28:57.926561 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32326): Launched 09:28:58.224637 run osmo-stp_10.42.42.5(pid=32327): Launched 09:28:58.334120 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:28:58.851706 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32329): Launched 09:28:58.958671 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:28:59.218275 run patchelf(pid=32330): Launched 09:28:59.393134 run osmo-stp_10.42.42.5(pid=32327): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32327)] 09:28:59.520920 run osmo-stp_10.42.42.5(pid=32327): stdout: | (launched: 2022-12-13_09:28:58.077756) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:28:59.648912 run osmo-stp_10.42.42.5(pid=32327): stderr: | �[0;m�[38;5;43m20221213092858247 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213092858247 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213092858247 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213092858248 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213092858248 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213092858248 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213092858248 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:28:59.772553 run osmo-stp_10.42.42.5(pid=32327): stdout: | (launched: 2022-12-13_09:28:58.077756) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:28:59.895080 run osmo-stp_10.42.42.5(pid=32327): stderr: | �[0;m�[38;5;43m20221213092858247 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213092858247 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213092858247 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213092858248 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213092858248 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213092858248 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213092858248 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:29:00.037737 run patchelf(pid=32330): Terminating (SIGINT) 09:29:00.206170 run patchelf(pid=32330): Terminated: ok {rc=0} 09:29:00.237078 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=32327): Process ended prematurely: osmo-stp_10.42.42.5(pid=32327) [trial-2387↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32327)] [trial-2387↪gprs:trx-lms-limenet-micro↪iperf3.py:8] 09:29:00.246322 tst iperf3.py:8: Test FAILED (7.3 sec) 09:29:00.306275 run osmo-hlr_10.42.42.2(pid=32324): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:trx-lms-limenet-micro↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32324)] 09:29:00.354827 run osmo-hlr_10.42.42.2(pid=32324): stdout: | (launched: 2022-12-13_09:28:57.139939) 09:29:00.403997 run osmo-hlr_10.42.42.2(pid=32324): stderr: | �[0;m�[1;31m20221213092857314 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213092857314 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213092857314 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213092857314 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213092857315 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213092857315 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213092857331 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:trx-lms-limenet-micro/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213092857339 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213092857339 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213092857339 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:29:00.446003 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32319): Terminating (SIGTERM) 09:29:00.485385 run iperf3-srv_10.42.42.10(pid=32320): Terminating (SIGTERM) 09:29:00.525113 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32323): Terminating (SIGTERM) 09:29:00.564547 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32326): Terminating (SIGTERM) 09:29:00.603969 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32329): Terminating (SIGTERM) 09:29:00.613274 --- ParallelTerminationStrategy: PID 32319 died... 09:29:00.666530 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32319): Terminated: ok {rc=0} 09:29:00.676183 --- ParallelTerminationStrategy: PID 32320 died... 09:29:00.729314 run iperf3-srv_10.42.42.10(pid=32320): Terminated {rc=256} 09:29:00.738860 --- ParallelTerminationStrategy: PID 32323 died... 09:29:00.792053 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32323): Terminated: ok {rc=0} 09:29:00.801798 --- ParallelTerminationStrategy: PID 32326 died... 09:29:00.864991 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32326): Terminated: ok {rc=0} 09:29:00.879182 --- ParallelTerminationStrategy: PID 32329 died... 09:29:00.937318 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32329): Terminated: ok {rc=0} 09:29:01.026019 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32327): Process ended prematurely: osmo-stp_10.42.42.5(pid=32327) [trial-2387↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32327)]