Failed
gprs:oc2g.iperf3.py (from gprs_oc2g)
Stacktrace
osmo-stp_10.42.42.5(pid=8037): Process ended prematurely: osmo-stp_10.42.42.5(pid=8037) [trial-2388↪gprs:oc2g↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8037)]
Standard Output
---------------------------------------------- trial-2388 gprs:oc2g iperf3.py ---------------------------------------------- 10:19:06.498459 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:19:06.510425 tst gprs:oc2g: Using 1 x bts (candidates: 1) 10:19:06.646273 tst iperf3.py: using LAC 33266 10:19:06.778649 tst iperf3.py: using RAC 116 10:19:06.904733 tst iperf3.py: using CellId 33266 10:19:07.030006 tst iperf3.py: using BVCI 33267 10:19:07.054309 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:19:07.064733 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:19:07.075658 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:19:07.086308 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:19:07.097320 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:19:07.107994 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:19:07.118853 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:19:07.129549 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:19:07.140336 tst gprs:oc2g: Using 1 x modem (candidates: 4) 10:19:07.444549 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 10:19:07.587135 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:19:07.937926 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8029): Launched 10:19:08.230945 run iperf3-srv_10.42.42.10(pid=8030): Launched 10:19:08.438343 tst iperf3.py:8: start network... 10:19:08.579345 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:19:09.114357 run create_hlr_db(pid=8031): Launched 10:19:09.309984 bus /gobi_6: Setting Powered False 10:19:10.331949 run create_hlr_db(pid=8031): Terminated: ok {rc=0} 10:19:10.782903 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8033): Launched 10:19:11.124719 run osmo-hlr_10.42.42.2(pid=8034): Launched 10:19:11.251975 run osmo-stp_10.42.42.5: Starting osmo-stp 10:19:11.839225 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8036): Launched 10:19:12.179616 run osmo-stp_10.42.42.5(pid=8037): Launched 10:19:12.302889 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:19:12.894774 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8039): Launched 10:19:13.015194 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:19:13.312022 run patchelf(pid=8040): Launched 10:19:13.509079 run osmo-stp_10.42.42.5(pid=8037): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:oc2g↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8037)] 10:19:13.652563 run osmo-stp_10.42.42.5(pid=8037): stdout: | (launched: 2022-12-13_10:19:12.011213) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:19:13.796178 run osmo-stp_10.42.42.5(pid=8037): stderr: | �[0;m�[38;5;43m20221213101912203 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213101912204 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213101912204 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213101912204 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213101912205 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213101912205 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213101912205 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:19:13.935408 run osmo-stp_10.42.42.5(pid=8037): stdout: | (launched: 2022-12-13_10:19:12.011213) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:19:14.073528 run osmo-stp_10.42.42.5(pid=8037): stderr: | �[0;m�[38;5;43m20221213101912203 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213101912204 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213101912204 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213101912204 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213101912205 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213101912205 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213101912205 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:19:14.234815 run patchelf(pid=8040): Terminating (SIGINT) 10:19:14.424501 run patchelf(pid=8040): Terminated: ok {rc=0} 10:19:14.459160 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=8037): Process ended prematurely: osmo-stp_10.42.42.5(pid=8037) [trial-2388↪gprs:oc2g↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8037)] [trial-2388↪gprs:oc2g↪iperf3.py:8] 10:19:14.469167 tst iperf3.py:8: Test FAILED (8.0 sec) 10:19:14.533364 run osmo-hlr_10.42.42.2(pid=8034): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:oc2g↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8034)] 10:19:14.585509 run osmo-hlr_10.42.42.2(pid=8034): stdout: | (launched: 2022-12-13_10:19:10.954957) 10:19:14.638270 run osmo-hlr_10.42.42.2(pid=8034): stderr: | �[0;m�[1;31m20221213101911151 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213101911151 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213101911151 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213101911151 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213101911151 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213101911151 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213101911164 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:oc2g/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213101911173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213101911173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213101911173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:19:14.683439 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8029): Terminating (SIGTERM) 10:19:14.726406 run iperf3-srv_10.42.42.10(pid=8030): Terminating (SIGTERM) 10:19:14.769175 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8033): Terminating (SIGTERM) 10:19:14.811802 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8036): Terminating (SIGTERM) 10:19:14.854983 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8039): Terminating (SIGTERM) 10:19:14.864765 --- ParallelTerminationStrategy: PID 8029 died... 10:19:14.921782 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8029): Terminated: ok {rc=0} 10:19:14.931917 --- ParallelTerminationStrategy: PID 8030 died... 10:19:14.988306 run iperf3-srv_10.42.42.10(pid=8030): Terminated {rc=256} 10:19:14.998446 --- ParallelTerminationStrategy: PID 8033 died... 10:19:15.054938 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8033): Terminated: ok {rc=0} 10:19:15.065159 --- ParallelTerminationStrategy: PID 8036 died... 10:19:15.121848 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8036): Terminated: ok {rc=0} 10:19:15.132009 --- ParallelTerminationStrategy: PID 8039 died... 10:19:15.188484 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8039): Terminated: ok {rc=0} 10:19:15.277062 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8037): Process ended prematurely: osmo-stp_10.42.42.5(pid=8037) [trial-2388↪gprs:oc2g↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8037)]