Failed
gprs:trx-lms-limenet-micro.iperf3.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=11848): Process ended prematurely: osmo-stp_10.42.42.5(pid=11848) [trial-2388↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11848)]
Standard Output
---------------------------------------------- trial-2388 gprs:trx-lms-limenet-micro iperf3.py ---------------------------------------------- 11:02:00.191589 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 11:02:00.203512 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 11:02:00.346197 tst iperf3.py: using LAC 33492 11:02:00.474424 tst iperf3.py: using RAC 87 11:02:00.602425 tst iperf3.py: using CellId 33492 11:02:00.734867 tst iperf3.py: using BVCI 33493 11:02:00.759661 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 11:02:00.770900 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 11:02:00.781923 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 11:02:00.792856 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 11:02:00.804218 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 11:02:00.815943 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 11:02:00.827472 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 11:02:00.838784 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 11:02:00.863783 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 11:02:01.179141 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 11:02:01.312756 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:02:01.644115 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11840): Launched 11:02:01.932614 run iperf3-srv_10.42.42.10(pid=11841): Launched 11:02:02.123324 tst iperf3.py:8: start network... 11:02:02.252473 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:02:02.741251 run create_hlr_db(pid=11842): Launched 11:02:02.915574 bus /gobi_6: Setting Powered False 11:02:03.937115 run create_hlr_db(pid=11842): Terminated: ok {rc=0} 11:02:04.340670 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11844): Launched 11:02:04.644395 run osmo-hlr_10.42.42.2(pid=11845): Launched 11:02:04.764476 run osmo-stp_10.42.42.5: Starting osmo-stp 11:02:05.298272 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11847): Launched 11:02:05.602229 run osmo-stp_10.42.42.5(pid=11848): Launched 11:02:05.712171 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:02:06.239977 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11850): Launched 11:02:06.348050 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:02:06.613006 run patchelf(pid=11851): Launched 11:02:06.790613 run osmo-stp_10.42.42.5(pid=11848): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11848)] 11:02:06.920340 run osmo-stp_10.42.42.5(pid=11848): stdout: | (launched: 2022-12-13_11:02:05.452329) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:02:07.050259 run osmo-stp_10.42.42.5(pid=11848): stderr: | �[0;m�[38;5;43m20221213110205626 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213110205626 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213110205626 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213110205627 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213110205627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213110205627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213110205627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:02:07.175743 run osmo-stp_10.42.42.5(pid=11848): stdout: | (launched: 2022-12-13_11:02:05.452329) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:02:07.301073 run osmo-stp_10.42.42.5(pid=11848): stderr: | �[0;m�[38;5;43m20221213110205626 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213110205626 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213110205626 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213110205627 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213110205627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213110205627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213110205627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:02:07.446032 run patchelf(pid=11851): Terminating (SIGINT) 11:02:07.629347 run patchelf(pid=11851): Terminated: ok {rc=0} 11:02:07.663277 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=11848): Process ended prematurely: osmo-stp_10.42.42.5(pid=11848) [trial-2388↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11848)] [trial-2388↪gprs:trx-lms-limenet-micro↪iperf3.py:8] 11:02:07.673504 tst iperf3.py:8: Test FAILED (7.5 sec) 11:02:07.736999 run osmo-hlr_10.42.42.2(pid=11845): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:trx-lms-limenet-micro↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11845)] 11:02:07.788594 run osmo-hlr_10.42.42.2(pid=11845): stdout: | (launched: 2022-12-13_11:02:04.495115) 11:02:07.840899 run osmo-hlr_10.42.42.2(pid=11845): stderr: | �[0;m�[1;31m20221213110204676 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213110204676 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213110204676 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213110204676 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213110204676 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213110204676 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213110204688 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-lms-limenet-micro/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213110204699 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213110204699 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213110204699 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:02:07.885427 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11840): Terminating (SIGTERM) 11:02:07.927246 run iperf3-srv_10.42.42.10(pid=11841): Terminating (SIGTERM) 11:02:07.969265 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11844): Terminating (SIGTERM) 11:02:08.011921 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11847): Terminating (SIGTERM) 11:02:08.054430 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11850): Terminating (SIGTERM) 11:02:08.064221 --- ParallelTerminationStrategy: PID 11840 died... 11:02:08.120850 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11840): Terminated: ok {rc=0} 11:02:08.131115 --- ParallelTerminationStrategy: PID 11841 died... 11:02:08.187216 run iperf3-srv_10.42.42.10(pid=11841): Terminated {rc=256} 11:02:08.197412 --- ParallelTerminationStrategy: PID 11844 died... 11:02:08.253611 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11844): Terminated: ok {rc=0} 11:02:08.263752 --- ParallelTerminationStrategy: PID 11847 died... 11:02:08.319889 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11847): Terminated: ok {rc=0} 11:02:08.330164 --- ParallelTerminationStrategy: PID 11850 died... 11:02:08.386587 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11850): Terminated: ok {rc=0} 11:02:08.474764 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11848): Process ended prematurely: osmo-stp_10.42.42.5(pid=11848) [trial-2388↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11848)]