Failed
gprs:oc2g.ping.py (from gprs_oc2g)
Stacktrace
osmo-stp_10.42.42.5(pid=15557): Process ended prematurely: osmo-stp_10.42.42.5(pid=15557) [trial-2389↪gprs:oc2g↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15557)]
Standard Output
---------------------------------------------- trial-2389 gprs:oc2g ping.py ---------------------------------------------- 11:47:29.832084 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 11:47:29.843971 tst gprs:oc2g: Using 1 x bts (candidates: 1) 11:47:29.968585 tst ping.py: using LAC 33729 11:47:30.091000 tst ping.py: using RAC 69 11:47:30.213798 tst ping.py: using CellId 33729 11:47:30.336355 tst ping.py: using BVCI 33730 11:47:30.360029 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 11:47:30.370887 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 11:47:30.381471 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 11:47:30.391783 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 11:47:30.402150 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 11:47:30.412539 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 11:47:30.423109 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 11:47:30.433460 tst gprs:oc2g: Using 1 x modem (candidates: 4) 11:47:30.734530 tst ping.py:19: start network... 11:47:30.880200 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:47:31.484382 run create_hlr_db(pid=15551): Launched 11:47:31.695972 bus /gobi_6: Setting Powered False 11:47:32.694825 run create_hlr_db(pid=15551): Terminated: ok {rc=0} 11:47:33.157889 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15553): Launched 11:47:33.492161 run osmo-hlr_10.42.42.2(pid=15554): Launched 11:47:33.614508 run osmo-stp_10.42.42.5: Starting osmo-stp 11:47:34.196924 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15556): Launched 11:47:34.531379 run osmo-stp_10.42.42.5(pid=15557): Launched 11:47:34.651943 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:47:35.231463 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15559): Launched 11:47:35.349640 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:47:35.640364 run patchelf(pid=15560): Launched 11:47:35.833738 run osmo-stp_10.42.42.5(pid=15557): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:oc2g↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15557)] 11:47:35.975386 run osmo-stp_10.42.42.5(pid=15557): stdout: | (launched: 2022-12-13_11:47:34.365757) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:47:36.116552 run osmo-stp_10.42.42.5(pid=15557): stderr: | �[0;m�[38;5;43m20221213114734562 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213114734562 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213114734563 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213114734563 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213114734563 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213114734563 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213114734564 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:47:36.252817 run osmo-stp_10.42.42.5(pid=15557): stdout: | (launched: 2022-12-13_11:47:34.365757) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:47:36.388020 run osmo-stp_10.42.42.5(pid=15557): stderr: | �[0;m�[38;5;43m20221213114734562 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213114734562 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213114734563 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213114734563 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213114734563 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213114734563 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213114734564 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:47:36.544706 run patchelf(pid=15560): Terminating (SIGINT) 11:47:36.729559 run patchelf(pid=15560): Terminated: ok {rc=0} 11:47:36.763082 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=15557): Process ended prematurely: osmo-stp_10.42.42.5(pid=15557) [trial-2389↪gprs:oc2g↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15557)] [trial-2389↪gprs:oc2g↪ping.py:22] 11:47:36.772438 tst ping.py:22: Test FAILED (6.9 sec) 11:47:36.836871 run osmo-hlr_10.42.42.2(pid=15554): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:oc2g↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15554)] 11:47:36.890313 run osmo-hlr_10.42.42.2(pid=15554): stdout: | (launched: 2022-12-13_11:47:33.326511) 11:47:36.943460 run osmo-hlr_10.42.42.2(pid=15554): stderr: | �[0;m�[1;31m20221213114733527 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213114733527 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213114733527 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213114733527 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213114733527 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213114733527 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213114733540 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:oc2g/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213114733548 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213114733548 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213114733548 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:47:36.988522 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15553): Terminating (SIGTERM) 11:47:37.031502 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15556): Terminating (SIGTERM) 11:47:37.074827 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15559): Terminating (SIGTERM) 11:47:37.084725 --- ParallelTerminationStrategy: PID 15553 died... 11:47:37.142006 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15553): Terminated: ok {rc=0} 11:47:37.152258 --- ParallelTerminationStrategy: PID 15556 died... 11:47:37.209517 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15556): Terminated: ok {rc=0} 11:47:37.219815 --- ParallelTerminationStrategy: PID 15559 died... 11:47:37.276697 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15559): Terminated: ok {rc=0} 11:47:37.365720 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15557): Process ended prematurely: osmo-stp_10.42.42.5(pid=15557) [trial-2389↪gprs:oc2g↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15557)]