Failed
gprs:trx-lms-limenet-micro.ping.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=20974): Process ended prematurely: osmo-stp_10.42.42.5(pid=20974) [trial-2389↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20974)]
Standard Output
---------------------------------------------- trial-2389 gprs:trx-lms-limenet-micro ping.py ---------------------------------------------- 12:30:25.243992 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:30:25.256796 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 12:30:25.398617 tst ping.py: using LAC 33955 12:30:25.526180 tst ping.py: using RAC 40 12:30:25.652080 tst ping.py: using CellId 33955 12:30:25.778708 tst ping.py: using BVCI 33956 12:30:25.804067 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:30:25.816561 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:30:25.828468 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:30:25.840756 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:30:25.853877 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:30:25.866857 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:30:25.880988 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:30:25.893865 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 12:30:26.193549 tst ping.py:19: start network... 12:30:26.327368 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:30:26.841940 run create_hlr_db(pid=20967): Launched 12:30:27.036096 bus /gobi_6: Setting Powered False 12:30:28.052531 run create_hlr_db(pid=20967): Terminated: ok {rc=0} 12:30:28.496456 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20969): Launched 12:30:28.916407 run osmo-hlr_10.42.42.2(pid=20970): Launched 12:30:29.171708 run osmo-stp_10.42.42.5: Starting osmo-stp 12:30:29.743065 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20973): Launched 12:30:30.059155 run osmo-stp_10.42.42.5(pid=20974): Launched 12:30:30.175602 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:30:30.726875 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20976): Launched 12:30:30.851602 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:30:31.181396 run patchelf(pid=20977): Launched 12:30:31.381942 run osmo-stp_10.42.42.5(pid=20974): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20974)] 12:30:31.511539 run osmo-stp_10.42.42.5(pid=20974): stdout: | (launched: 2022-12-13_12:30:29.903192) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:30:31.642280 run osmo-stp_10.42.42.5(pid=20974): stderr: | �[0;m�[38;5;43m20221213123030091 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213123030092 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213123030092 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213123030092 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213123030093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213123030093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213123030093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:30:31.769685 run osmo-stp_10.42.42.5(pid=20974): stdout: | (launched: 2022-12-13_12:30:29.903192) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:30:31.944504 run osmo-stp_10.42.42.5(pid=20974): stderr: | �[0;m�[38;5;43m20221213123030091 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213123030092 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213123030092 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213123030092 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213123030093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213123030093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213123030093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:30:32.091852 run patchelf(pid=20977): Terminating (SIGINT) 12:30:32.262465 run patchelf(pid=20977): Terminated: ok {rc=0} 12:30:32.293396 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=20974): Process ended prematurely: osmo-stp_10.42.42.5(pid=20974) [trial-2389↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20974)] [trial-2389↪gprs:trx-lms-limenet-micro↪ping.py:22] 12:30:32.302289 tst ping.py:22: Test FAILED (7.0 sec) 12:30:32.362110 run osmo-hlr_10.42.42.2(pid=20970): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:trx-lms-limenet-micro↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20970)] 12:30:32.411106 run osmo-hlr_10.42.42.2(pid=20970): stdout: | (launched: 2022-12-13_12:30:28.660253) 12:30:32.460716 run osmo-hlr_10.42.42.2(pid=20970): stderr: | �[0;m�[1;31m20221213123028968 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213123028968 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213123028968 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213123028968 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213123028968 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213123028968 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213123028988 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:trx-lms-limenet-micro/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213123028999 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213123028999 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213123029000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:30:32.502828 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20969): Terminating (SIGTERM) 12:30:32.542833 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20973): Terminating (SIGTERM) 12:30:32.582281 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20976): Terminating (SIGTERM) 12:30:32.590983 --- ParallelTerminationStrategy: PID 20969 died... 12:30:32.644090 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20969): Terminated: ok {rc=0} 12:30:32.653723 --- ParallelTerminationStrategy: PID 20973 died... 12:30:32.706917 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20973): Terminated: ok {rc=0} 12:30:32.716399 --- ParallelTerminationStrategy: PID 20976 died... 12:30:32.769139 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20976): Terminated: ok {rc=0} 12:30:32.856106 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20974): Process ended prematurely: osmo-stp_10.42.42.5(pid=20974) [trial-2389↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20974)]