Failed
gprs:trx-lms-limenet-micro.iperf3.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=28998): Process ended prematurely: osmo-stp_10.42.42.5(pid=28998) [trial-2390↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28998)]
Standard Output
---------------------------------------------- trial-2390 gprs:trx-lms-limenet-micro iperf3.py ---------------------------------------------- 13:57:51.130824 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:57:51.142175 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 13:57:51.279109 tst iperf3.py: using LAC 34414 13:57:51.400543 tst iperf3.py: using RAC 244 13:57:51.523151 tst iperf3.py: using CellId 34414 13:57:51.644134 tst iperf3.py: using BVCI 34415 13:57:51.667521 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:57:51.678601 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:57:51.689440 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:57:51.699900 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:57:51.710517 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:57:51.721434 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:57:51.732372 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:57:51.743072 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:57:51.753905 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 13:57:52.049593 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 13:57:52.186335 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:57:52.525952 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28990): Launched 13:57:52.811290 run iperf3-srv_10.42.42.10(pid=28991): Launched 13:57:53.013774 tst iperf3.py:8: start network... 13:57:53.151165 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:57:53.670148 run create_hlr_db(pid=28992): Launched 13:57:53.859242 bus /gobi_6: Setting Powered False 13:57:54.879702 run create_hlr_db(pid=28992): Terminated: ok {rc=0} 13:57:55.289709 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28994): Launched 13:57:55.597771 run osmo-hlr_10.42.42.2(pid=28995): Launched 13:57:55.709562 run osmo-stp_10.42.42.5: Starting osmo-stp 13:57:56.238037 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28997): Launched 13:57:56.543631 run osmo-stp_10.42.42.5(pid=28998): Launched 13:57:56.654553 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:57:57.188758 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29000): Launched 13:57:57.296370 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:57:57.563301 run patchelf(pid=29001): Launched 13:57:57.741171 run osmo-stp_10.42.42.5(pid=28998): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28998)] 13:57:57.870872 run osmo-stp_10.42.42.5(pid=28998): stdout: | (launched: 2022-12-13_13:57:56.392353) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:57:58.001827 run osmo-stp_10.42.42.5(pid=28998): stderr: | �[0;m�[38;5;43m20221213135756560 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213135756560 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213135756561 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213135756561 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213135756562 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213135756562 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213135756562 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:57:58.127545 run osmo-stp_10.42.42.5(pid=28998): stdout: | (launched: 2022-12-13_13:57:56.392353) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:57:58.252019 run osmo-stp_10.42.42.5(pid=28998): stderr: | �[0;m�[38;5;43m20221213135756560 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213135756560 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213135756561 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213135756561 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213135756562 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213135756562 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213135756562 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:57:58.397427 run patchelf(pid=29001): Terminating (SIGINT) 13:57:58.568651 run patchelf(pid=29001): Terminated: ok {rc=0} 13:57:58.600024 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=28998): Process ended prematurely: osmo-stp_10.42.42.5(pid=28998) [trial-2390↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28998)] [trial-2390↪gprs:trx-lms-limenet-micro↪iperf3.py:8] 13:57:58.609303 tst iperf3.py:8: Test FAILED (7.5 sec) 13:57:58.668791 run osmo-hlr_10.42.42.2(pid=28995): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:trx-lms-limenet-micro↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28995)] 13:57:58.717573 run osmo-hlr_10.42.42.2(pid=28995): stdout: | (launched: 2022-12-13_13:57:55.444684) 13:57:58.766575 run osmo-hlr_10.42.42.2(pid=28995): stderr: | �[0;m�[1;31m20221213135755620 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213135755620 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213135755620 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213135755620 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213135755620 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213135755620 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213135755632 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:trx-lms-limenet-micro/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213135755640 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213135755641 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213135755641 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:57:58.808532 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28990): Terminating (SIGTERM) 13:57:58.847864 run iperf3-srv_10.42.42.10(pid=28991): Terminating (SIGTERM) 13:57:58.887229 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28994): Terminating (SIGTERM) 13:57:58.926607 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28997): Terminating (SIGTERM) 13:57:58.966269 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29000): Terminating (SIGTERM) 13:57:58.975412 --- ParallelTerminationStrategy: PID 28990 died... 13:57:59.028555 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28990): Terminated: ok {rc=0} 13:57:59.038345 --- ParallelTerminationStrategy: PID 28991 died... 13:57:59.091115 run iperf3-srv_10.42.42.10(pid=28991): Terminated {rc=256} 13:57:59.100641 --- ParallelTerminationStrategy: PID 28994 died... 13:57:59.153591 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28994): Terminated: ok {rc=0} 13:57:59.163357 --- ParallelTerminationStrategy: PID 28997 died... 13:57:59.216167 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28997): Terminated: ok {rc=0} 13:57:59.225985 --- ParallelTerminationStrategy: PID 29000 died... 13:57:59.278768 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29000): Terminated: ok {rc=0} 13:57:59.366078 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28998): Process ended prematurely: osmo-stp_10.42.42.5(pid=28998) [trial-2390↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28998)]