Failed
gprs:sysmo.ping.py (from gprs_sysmo)
Stacktrace
osmo-stp_10.42.42.5(pid=9605): Process ended prematurely: osmo-stp_10.42.42.5(pid=9605) [trial-2392↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9605)]
Standard Output
---------------------------------------------- trial-2392 gprs:sysmo ping.py ---------------------------------------------- 17:16:41.850046 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 17:16:41.861192 tst gprs:sysmo: Using 1 x bts (candidates: 1) 17:16:41.993768 tst ping.py: using LAC 35070 17:16:42.123137 tst ping.py: using RAC 135 17:16:42.252727 tst ping.py: using CellId 35070 17:16:42.382563 tst ping.py: using BVCI 35071 17:16:42.407603 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 17:16:42.418657 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 17:16:42.429654 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 17:16:42.440467 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 17:16:42.451597 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 17:16:42.462763 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 17:16:42.474015 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 17:16:42.485245 tst gprs:sysmo: Using 1 x modem (candidates: 4) 17:16:42.768040 tst ping.py:19: start network... 17:16:42.895890 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:16:43.386143 run create_hlr_db(pid=9599): Launched 17:16:43.561679 bus /gobi_6: Setting Powered False 17:16:44.595809 run create_hlr_db(pid=9599): Terminated: ok {rc=0} 17:16:45.007151 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9601): Launched 17:16:45.314374 run osmo-hlr_10.42.42.2(pid=9602): Launched 17:16:45.433058 run osmo-stp_10.42.42.5: Starting osmo-stp 17:16:46.010878 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9604): Launched 17:16:46.396040 run osmo-stp_10.42.42.5(pid=9605): Launched 17:16:46.676392 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:16:47.300490 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9607): Launched 17:16:47.412530 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:16:47.682906 run patchelf(pid=9608): Launched 17:16:47.861473 run osmo-stp_10.42.42.5(pid=9605): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9605)] 17:16:47.992347 run osmo-stp_10.42.42.5(pid=9605): stdout: | (launched: 2022-12-13_17:16:46.168800) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:16:48.123227 run osmo-stp_10.42.42.5(pid=9605): stderr: | �[0;m�[38;5;43m20221213171646460 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213171646460 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213171646460 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213171646466 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213171646467 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213171646468 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213171646468 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:16:48.249371 run osmo-stp_10.42.42.5(pid=9605): stdout: | (launched: 2022-12-13_17:16:46.168800) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:16:48.374113 run osmo-stp_10.42.42.5(pid=9605): stderr: | �[0;m�[38;5;43m20221213171646460 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213171646460 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213171646460 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213171646466 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213171646467 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213171646468 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213171646468 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:16:48.520587 run patchelf(pid=9608): Terminating (SIGINT) 17:16:48.693804 run patchelf(pid=9608): Terminated: ok {rc=0} 17:16:48.724993 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=9605): Process ended prematurely: osmo-stp_10.42.42.5(pid=9605) [trial-2392↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9605)] [trial-2392↪gprs:sysmo↪ping.py:22] 17:16:48.733544 tst ping.py:22: Test FAILED (6.9 sec) 17:16:48.793746 run osmo-hlr_10.42.42.2(pid=9602): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:sysmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9602)] 17:16:48.843279 run osmo-hlr_10.42.42.2(pid=9602): stdout: | (launched: 2022-12-13_17:16:45.162492) 17:16:48.893018 run osmo-hlr_10.42.42.2(pid=9602): stderr: | �[0;m�[1;31m20221213171645344 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213171645345 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213171645345 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213171645345 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213171645345 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213171645345 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213171645357 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:sysmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213171645366 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213171645366 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213171645366 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:16:48.935672 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9601): Terminating (SIGTERM) 17:16:48.976121 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9604): Terminating (SIGTERM) 17:16:49.016497 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9607): Terminating (SIGTERM) 17:16:49.025914 --- ParallelTerminationStrategy: PID 9601 died... 17:16:49.080241 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9601): Terminated: ok {rc=0} 17:16:49.089982 --- ParallelTerminationStrategy: PID 9604 died... 17:16:49.143865 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9604): Terminated: ok {rc=0} 17:16:49.153935 --- ParallelTerminationStrategy: PID 9607 died... 17:16:49.207890 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9607): Terminated: ok {rc=0} 17:16:49.297520 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9605): Process ended prematurely: osmo-stp_10.42.42.5(pid=9605) [trial-2392↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9605)]