Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=20520): Process ended prematurely: osmo-stp_10.42.42.5(pid=20520) [trial-2397↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20520)]
Standard Output
---------------------------------------------- trial-2397 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 00:49:09.487485 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:09.498846 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 00:49:09.653648 tst cs_paging_gprs_active.py: using LAC 37387 00:49:09.780539 tst cs_paging_gprs_active.py: using RAC 157 00:49:09.902923 tst cs_paging_gprs_active.py: using CellId 37387 00:49:10.024580 tst cs_paging_gprs_active.py: using BVCI 37388 00:49:10.048396 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:10.059305 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:10.070164 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:10.080849 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:10.091544 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:10.102323 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:10.113471 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:10.124036 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:10.134839 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:49:10.251945 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:49:10.538345 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:49:10.665756 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:49:10.985721 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20510): Launched 00:49:11.250359 run iperf3-srv_10.42.42.10(pid=20511): Launched 00:49:11.437755 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:49:11.564929 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:49:11.884109 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20512): Launched 00:49:12.147421 run iperf3-srv_10.42.42.10(pid=20513): Launched 00:49:12.333455 tst cs_paging_gprs_active.py:38: start network... 00:49:12.460068 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:49:12.953210 run create_hlr_db(pid=20514): Launched 00:49:13.129145 bus /gobi_6: Setting Powered False 00:49:14.150442 run create_hlr_db(pid=20514): Terminated: ok {rc=0} 00:49:14.559363 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20516): Launched 00:49:14.868084 run osmo-hlr_10.42.42.2(pid=20517): Launched 00:49:14.979740 run osmo-stp_10.42.42.5: Starting osmo-stp 00:49:15.513461 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20519): Launched 00:49:15.820369 run osmo-stp_10.42.42.5(pid=20520): Launched 00:49:16.084007 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:49:16.799426 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20522): Launched 00:49:16.913319 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:49:17.203493 run patchelf(pid=20523): Launched 00:49:17.384771 run osmo-stp_10.42.42.5(pid=20520): ERR: Terminated: ERROR {rc=1} [trial-2397↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20520)] 00:49:17.516427 run osmo-stp_10.42.42.5(pid=20520): stdout: | (launched: 2022-12-14_00:49:15.668566) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:49:17.648250 run osmo-stp_10.42.42.5(pid=20520): stderr: | �[0;m�[38;5;43m20221214004915876 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214004915876 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214004915876 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214004915880 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214004915881 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214004915881 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214004915881 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:49:17.774907 run osmo-stp_10.42.42.5(pid=20520): stdout: | (launched: 2022-12-14_00:49:15.668566) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:49:17.900339 run osmo-stp_10.42.42.5(pid=20520): stderr: | �[0;m�[38;5;43m20221214004915876 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214004915876 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214004915876 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214004915880 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214004915881 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214004915881 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214004915881 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:49:18.046994 run patchelf(pid=20523): Terminating (SIGINT) 00:49:18.219516 run patchelf(pid=20523): Terminated: ok {rc=0} 00:49:18.251011 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20520): Process ended prematurely: osmo-stp_10.42.42.5(pid=20520) [trial-2397↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20520)] [trial-2397↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 00:49:18.260315 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 00:49:18.320319 run osmo-hlr_10.42.42.2(pid=20517): ERR: Terminated: ERROR {rc=237} [trial-2397↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20517)] 00:49:18.369143 run osmo-hlr_10.42.42.2(pid=20517): stdout: | (launched: 2022-12-14_00:49:14.714921) 00:49:18.418417 run osmo-hlr_10.42.42.2(pid=20517): stderr: | �[0;m�[1;31m20221214004914894 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214004914894 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214004914894 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214004914894 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214004914894 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214004914895 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214004914907 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214004914916 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214004914916 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214004914916 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:49:18.460419 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20510): Terminating (SIGTERM) 00:49:18.499997 run iperf3-srv_10.42.42.10(pid=20511): Terminating (SIGTERM) 00:49:18.539595 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20512): Terminating (SIGTERM) 00:49:18.578955 run iperf3-srv_10.42.42.10(pid=20513): Terminating (SIGTERM) 00:49:18.618434 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20516): Terminating (SIGTERM) 00:49:18.657816 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20519): Terminating (SIGTERM) 00:49:18.697164 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20522): Terminating (SIGTERM) 00:49:18.706289 --- ParallelTerminationStrategy: PID 20510 died... 00:49:18.759582 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20510): Terminated: ok {rc=0} 00:49:18.769168 --- ParallelTerminationStrategy: PID 20511 died... 00:49:18.821870 run iperf3-srv_10.42.42.10(pid=20511): Terminated {rc=256} 00:49:18.831382 --- ParallelTerminationStrategy: PID 20512 died... 00:49:18.884214 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20512): Terminated: ok {rc=0} 00:49:18.893740 --- ParallelTerminationStrategy: PID 20513 died... 00:49:18.946619 run iperf3-srv_10.42.42.10(pid=20513): Terminated {rc=256} 00:49:18.956097 --- ParallelTerminationStrategy: PID 20516 died... 00:49:19.009008 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20516): Terminated: ok {rc=0} 00:49:19.018516 --- ParallelTerminationStrategy: PID 20519 died... 00:49:19.071194 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20519): Terminated: ok {rc=0} 00:49:19.080626 --- ParallelTerminationStrategy: PID 20522 died... 00:49:19.133370 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20522): Terminated: ok {rc=0} 00:49:19.221993 bus /gobi_0: Setting Powered False 00:49:20.324533 bus /gobi_0: Setting Powered False 00:49:21.433068 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20520): Process ended prematurely: osmo-stp_10.42.42.5(pid=20520) [trial-2397↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20520)]