Failed
gprs:trx-b200.ping.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=21774): Process ended prematurely: osmo-stp_10.42.42.5(pid=21774) [trial-2397↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21774)]
Standard Output
---------------------------------------------- trial-2397 gprs:trx-b200 ping.py ---------------------------------------------- 01:03:24.282123 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:03:24.293272 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 01:03:24.435786 tst ping.py: using LAC 37463 01:03:24.560503 tst ping.py: using RAC 233 01:03:24.686965 tst ping.py: using CellId 37463 01:03:24.811416 tst ping.py: using BVCI 37464 01:03:24.835956 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:03:24.847271 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:03:24.858273 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:03:24.869195 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:03:24.880134 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:03:24.891298 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:03:24.902606 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:03:24.913849 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 01:03:25.185355 tst ping.py:19: start network... 01:03:25.307642 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:03:25.780705 run create_hlr_db(pid=21768): Launched 01:03:25.951429 bus /gobi_6: Setting Powered False 01:03:26.972379 run create_hlr_db(pid=21768): Terminated: ok {rc=0} 01:03:27.395259 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21770): Launched 01:03:27.715840 run osmo-hlr_10.42.42.2(pid=21771): Launched 01:03:27.836530 run osmo-stp_10.42.42.5: Starting osmo-stp 01:03:28.391219 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21773): Launched 01:03:28.710112 run osmo-stp_10.42.42.5(pid=21774): Launched 01:03:28.825322 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:03:29.378060 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21776): Launched 01:03:29.490971 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:03:29.770999 run patchelf(pid=21777): Launched 01:03:29.958501 run osmo-stp_10.42.42.5(pid=21774): ERR: Terminated: ERROR {rc=1} [trial-2397↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21774)] 01:03:30.095175 run osmo-stp_10.42.42.5(pid=21774): stdout: | (launched: 2022-12-14_01:03:28.552488) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:03:30.232299 run osmo-stp_10.42.42.5(pid=21774): stderr: | �[0;m�[38;5;43m20221214010328741 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214010328741 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214010328741 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214010328742 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214010328742 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214010328742 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214010328742 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:03:30.364485 run osmo-stp_10.42.42.5(pid=21774): stdout: | (launched: 2022-12-14_01:03:28.552488) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:03:30.495715 run osmo-stp_10.42.42.5(pid=21774): stderr: | �[0;m�[38;5;43m20221214010328741 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214010328741 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214010328741 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214010328742 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214010328742 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214010328742 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214010328742 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:03:30.648591 run patchelf(pid=21777): Terminating (SIGINT) 01:03:30.827706 run patchelf(pid=21777): Terminated: ok {rc=0} 01:03:30.884542 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=21774): Process ended prematurely: osmo-stp_10.42.42.5(pid=21774) [trial-2397↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21774)] [trial-2397↪gprs:trx-b200↪ping.py:22] 01:03:30.894814 tst ping.py:22: Test FAILED (6.6 sec) 01:03:30.961229 run osmo-hlr_10.42.42.2(pid=21771): ERR: Terminated: ERROR {rc=237} [trial-2397↪gprs:trx-b200↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21771)] 01:03:31.016634 run osmo-hlr_10.42.42.2(pid=21771): stdout: | (launched: 2022-12-14_01:03:27.556556) 01:03:31.078514 run osmo-hlr_10.42.42.2(pid=21771): stderr: | �[0;m�[1;31m20221214010327748 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214010327748 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214010327748 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214010327748 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214010327748 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214010327748 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214010327761 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:trx-b200/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214010327770 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214010327770 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214010327770 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:03:31.124880 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21770): Terminating (SIGTERM) 01:03:31.169070 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21773): Terminating (SIGTERM) 01:03:31.214090 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21776): Terminating (SIGTERM) 01:03:31.224263 --- ParallelTerminationStrategy: PID 21770 died... 01:03:31.283388 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21770): Terminated: ok {rc=0} 01:03:31.295084 --- ParallelTerminationStrategy: PID 21773 died... 01:03:31.353214 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21773): Terminated: ok {rc=0} 01:03:31.364098 --- ParallelTerminationStrategy: PID 21776 died... 01:03:31.422947 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21776): Terminated: ok {rc=0} 01:03:31.524677 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21774): Process ended prematurely: osmo-stp_10.42.42.5(pid=21774) [trial-2397↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21774)]