Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms-limenet-micro.ping.py (from gprs_trx-lms-limenet-micro)

Failing for the past 259 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=24684): Process ended prematurely: osmo-stp_10.42.42.5(pid=24684) [trial-2397↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24684)]

Standard Output

----------------------------------------------
trial-2397 gprs:trx-lms-limenet-micro ping.py
----------------------------------------------
01:37:20.394577 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
01:37:20.405985 tst       gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1)
01:37:20.533001 tst                          ping.py: using LAC 37643
01:37:20.655821 tst                          ping.py: using RAC 158
01:37:20.778130 tst                          ping.py: using CellId 37643
01:37:20.899748 tst                          ping.py: using BVCI 37644
01:37:20.923813 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
01:37:20.935164 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
01:37:20.946481 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
01:37:20.958158 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
01:37:20.969683 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
01:37:20.981266 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
01:37:20.993106 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
01:37:21.004684 tst       gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4)
01:37:21.288645 tst                       ping.py:19: start network...
01:37:21.417993 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:37:21.904463 run         create_hlr_db(pid=24678): Launched
01:37:22.086084 bus                          /gobi_6: Setting Powered False
01:37:23.106563 run         create_hlr_db(pid=24678): Terminated: ok {rc=0}
01:37:23.497888 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24680): Launched
01:37:23.787954 run   osmo-hlr_10.42.42.2(pid=24681): Launched
01:37:23.893877 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:37:24.399988 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24683): Launched
01:37:24.691651 run   osmo-stp_10.42.42.5(pid=24684): Launched
01:37:24.797024 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:37:25.305752 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24686): Launched
01:37:25.408505 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:37:25.662349 run              patchelf(pid=24687): Launched
01:37:25.831671 run   osmo-stp_10.42.42.5(pid=24684): ERR: Terminated: ERROR {rc=1}  [trial-2397↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24684)]
01:37:25.956171 run   osmo-stp_10.42.42.5(pid=24684): stdout: 
| (launched: 2022-12-14_01:37:24.546738)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:37:26.080826 run   osmo-stp_10.42.42.5(pid=24684): stderr: 
| �[0;m�[38;5;43m20221214013724713 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214013724713 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214013724713 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214013724714 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214013724714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214013724714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214013724714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:37:26.200586 run   osmo-stp_10.42.42.5(pid=24684): stdout: 
| (launched: 2022-12-14_01:37:24.546738)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:37:26.318869 run   osmo-stp_10.42.42.5(pid=24684): stderr: 
| �[0;m�[38;5;43m20221214013724713 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214013724713 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214013724713 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214013724714 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214013724714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214013724714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214013724714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:37:26.457249 run              patchelf(pid=24687): Terminating (SIGINT)
01:37:26.619705 run              patchelf(pid=24687): Terminated: ok {rc=0}
01:37:26.649619 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=24684): Process ended prematurely: osmo-stp_10.42.42.5(pid=24684) [trial-2397↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24684)]  [trial-2397↪gprs:trx-lms-limenet-micro↪ping.py:22]
01:37:26.658155 tst                       ping.py:22: Test FAILED (6.3 sec)
01:37:26.716718 run   osmo-hlr_10.42.42.2(pid=24681): ERR: Terminated: ERROR {rc=237}  [trial-2397↪gprs:trx-lms-limenet-micro↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24681)]
01:37:26.764844 run   osmo-hlr_10.42.42.2(pid=24681): stdout: 
| (launched: 2022-12-14_01:37:23.645068) 
01:37:26.813744 run   osmo-hlr_10.42.42.2(pid=24681): stderr: 
| �[0;m�[1;31m20221214013723813 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214013723813 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214013723813 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214013723813 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214013723813 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214013723814 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214013723826 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:trx-lms-limenet-micro/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214013723835 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214013723835 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214013723835 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:37:26.855012 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24680): Terminating (SIGTERM)
01:37:26.894072 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24683): Terminating (SIGTERM)
01:37:26.932985 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24686): Terminating (SIGTERM)
01:37:26.941950 ---      ParallelTerminationStrategy: PID 24680 died...
01:37:26.993910 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24680): Terminated: ok {rc=0}
01:37:27.003184 ---      ParallelTerminationStrategy: PID 24683 died...
01:37:27.054846 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24683): Terminated: ok {rc=0}
01:37:27.064047 ---      ParallelTerminationStrategy: PID 24686 died...
01:37:27.115813 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24686): Terminated: ok {rc=0}
01:37:27.201842 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24684): Process ended prematurely: osmo-stp_10.42.42.5(pid=24684) [trial-2397↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24684)]