Failed
gprs:trx-lms-limenet-micro.iperf3.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=8853): Process ended prematurely: osmo-stp_10.42.42.5(pid=8853) [trial-2399↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8853)]
Standard Output
---------------------------------------------- trial-2399 gprs:trx-lms-limenet-micro iperf3.py ---------------------------------------------- 04:31:22.097139 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 04:31:22.109476 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 04:31:22.245812 tst iperf3.py: using LAC 38563 04:31:22.364413 tst iperf3.py: using RAC 58 04:31:22.484801 tst iperf3.py: using CellId 38563 04:31:22.605492 tst iperf3.py: using BVCI 38564 04:31:22.628554 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 04:31:22.639343 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 04:31:22.649854 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 04:31:22.660404 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 04:31:22.671299 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 04:31:22.681838 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 04:31:22.692812 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 04:31:22.703375 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 04:31:22.714131 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 04:31:22.997530 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 04:31:23.123492 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:31:23.438913 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8845): Launched 04:31:23.700498 run iperf3-srv_10.42.42.10(pid=8846): Launched 04:31:23.884170 tst iperf3.py:8: start network... 04:31:24.010051 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:31:24.495822 run create_hlr_db(pid=8847): Launched 04:31:24.669082 bus /gobi_6: Setting Powered False 04:31:25.691721 run create_hlr_db(pid=8847): Terminated: ok {rc=0} 04:31:26.125591 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8849): Launched 04:31:26.453729 run osmo-hlr_10.42.42.2(pid=8850): Launched 04:31:26.578025 run osmo-stp_10.42.42.5: Starting osmo-stp 04:31:27.149962 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8852): Launched 04:31:27.478560 run osmo-stp_10.42.42.5(pid=8853): Launched 04:31:27.598852 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:31:28.170240 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8855): Launched 04:31:28.286891 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:31:28.573855 run patchelf(pid=8856): Launched 04:31:28.765322 run osmo-stp_10.42.42.5(pid=8853): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8853)] 04:31:28.905415 run osmo-stp_10.42.42.5(pid=8853): stdout: | (launched: 2022-12-14_04:31:27.316786) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:31:29.045403 run osmo-stp_10.42.42.5(pid=8853): stderr: | �[0;m�[38;5;43m20221214043127507 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214043127507 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214043127508 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214043127508 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214043127509 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214043127509 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214043127509 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:31:29.181050 run osmo-stp_10.42.42.5(pid=8853): stdout: | (launched: 2022-12-14_04:31:27.316786) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:31:29.315410 run osmo-stp_10.42.42.5(pid=8853): stderr: | �[0;m�[38;5;43m20221214043127507 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214043127507 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214043127508 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214043127508 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214043127509 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214043127509 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214043127509 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:31:29.471194 run patchelf(pid=8856): Terminating (SIGINT) 04:31:29.653950 run patchelf(pid=8856): Terminated: ok {rc=0} 04:31:29.687633 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=8853): Process ended prematurely: osmo-stp_10.42.42.5(pid=8853) [trial-2399↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8853)] [trial-2399↪gprs:trx-lms-limenet-micro↪iperf3.py:8] 04:31:29.697784 tst iperf3.py:8: Test FAILED (7.6 sec) 04:31:29.761288 run osmo-hlr_10.42.42.2(pid=8850): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:trx-lms-limenet-micro↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8850)] 04:31:29.813074 run osmo-hlr_10.42.42.2(pid=8850): stdout: | (launched: 2022-12-14_04:31:26.291422) 04:31:29.865270 run osmo-hlr_10.42.42.2(pid=8850): stderr: | �[0;m�[1;31m20221214043126490 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214043126490 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214043126490 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214043126490 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214043126490 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214043126490 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214043126502 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:trx-lms-limenet-micro/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214043126510 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214043126511 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214043126511 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:31:29.909788 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8845): Terminating (SIGTERM) 04:31:29.952166 run iperf3-srv_10.42.42.10(pid=8846): Terminating (SIGTERM) 04:31:29.994239 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8849): Terminating (SIGTERM) 04:31:30.036524 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8852): Terminating (SIGTERM) 04:31:30.078819 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8855): Terminating (SIGTERM) 04:31:30.088663 --- ParallelTerminationStrategy: PID 8845 died... 04:31:30.145584 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8845): Terminated: ok {rc=0} 04:31:30.155863 --- ParallelTerminationStrategy: PID 8846 died... 04:31:30.212358 run iperf3-srv_10.42.42.10(pid=8846): Terminated {rc=256} 04:31:30.222671 --- ParallelTerminationStrategy: PID 8849 died... 04:31:30.279215 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8849): Terminated: ok {rc=0} 04:31:30.289552 --- ParallelTerminationStrategy: PID 8852 died... 04:31:30.346072 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8852): Terminated: ok {rc=0} 04:31:30.356315 --- ParallelTerminationStrategy: PID 8855 died... 04:31:30.412828 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8855): Terminated: ok {rc=0} 04:31:30.499896 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8853): Process ended prematurely: osmo-stp_10.42.42.5(pid=8853) [trial-2399↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8853)]