Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=11555): Process ended prematurely: osmo-stp_10.42.42.5(pid=11555) [trial-2403↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11555)]
Standard Output
---------------------------------------------- trial-2403 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 11:05:51.736128 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:51.748584 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 11:05:51.894544 tst iperf3m4.py: using LAC 40494 11:05:52.018693 tst iperf3m4.py: using RAC 204 11:05:52.142674 tst iperf3m4.py: using CellId 40494 11:05:52.259346 tst iperf3m4.py: using BVCI 40495 11:05:52.282256 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:52.293571 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:52.304715 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:52.315902 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:52.327454 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:52.338968 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:52.350493 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:52.361792 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:52.373469 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 11:05:52.494913 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 11:05:52.615181 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 11:05:52.737491 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 11:05:53.036235 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 11:05:53.171491 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:05:53.509567 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11541): Launched 11:05:53.790118 run iperf3-srv_10.42.42.10(pid=11542): Launched 11:05:53.988237 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 11:05:54.122928 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:05:54.460202 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11543): Launched 11:05:54.740309 run iperf3-srv_10.42.42.10(pid=11544): Launched 11:05:54.939607 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 11:05:55.074006 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:05:55.411977 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11545): Launched 11:05:55.690880 run iperf3-srv_10.42.42.10(pid=11546): Launched 11:05:55.889101 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 11:05:56.023350 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:05:56.359257 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11547): Launched 11:05:56.640210 run iperf3-srv_10.42.42.10(pid=11548): Launched 11:05:56.839055 tst iperf3m4.py:8: start network... 11:05:56.973680 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:05:57.493601 run create_hlr_db(pid=11549): Launched 11:05:57.680620 bus /gobi_6: Setting Powered False 11:05:58.702381 run create_hlr_db(pid=11549): Terminated: ok {rc=0} 11:05:59.113996 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11551): Launched 11:05:59.417668 run osmo-hlr_10.42.42.2(pid=11552): Launched 11:05:59.537927 run osmo-stp_10.42.42.5: Starting osmo-stp 11:06:00.072547 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11554): Launched 11:06:00.376597 run osmo-stp_10.42.42.5(pid=11555): Launched 11:06:00.486479 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:06:01.052493 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11557): Launched 11:06:01.163477 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:06:01.444010 run patchelf(pid=11558): Launched 11:06:01.629652 run osmo-stp_10.42.42.5(pid=11555): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11555)] 11:06:01.763158 run osmo-stp_10.42.42.5(pid=11555): stdout: | (launched: 2022-12-14_11:06:00.226203) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:06:01.897385 run osmo-stp_10.42.42.5(pid=11555): stderr: | �[0;m�[38;5;43m20221214110600394 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214110600394 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214110600395 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214110600395 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214110600395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214110600395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214110600396 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:06:02.026818 run osmo-stp_10.42.42.5(pid=11555): stdout: | (launched: 2022-12-14_11:06:00.226203) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:06:02.155567 run osmo-stp_10.42.42.5(pid=11555): stderr: | �[0;m�[38;5;43m20221214110600394 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214110600394 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214110600395 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214110600395 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214110600395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214110600395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214110600396 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:06:02.304333 run patchelf(pid=11558): Terminating (SIGINT) 11:06:02.475914 run patchelf(pid=11558): Terminated: ok {rc=0} 11:06:02.507559 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=11555): Process ended prematurely: osmo-stp_10.42.42.5(pid=11555) [trial-2403↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11555)] [trial-2403↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 11:06:02.517200 tst iperf3m4.py:8: Test FAILED (10.8 sec) 11:06:02.578373 run osmo-hlr_10.42.42.2(pid=11552): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11552)] 11:06:02.627984 run osmo-hlr_10.42.42.2(pid=11552): stdout: | (launched: 2022-12-14_11:05:59.267217) 11:06:02.678234 run osmo-hlr_10.42.42.2(pid=11552): stderr: | �[0;m�[1;31m20221214110559440 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214110559440 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214110559440 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214110559440 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214110559440 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214110559440 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214110559452 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214110559461 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214110559461 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214110559461 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:06:02.720806 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11541): Terminating (SIGTERM) 11:06:02.760822 run iperf3-srv_10.42.42.10(pid=11542): Terminating (SIGTERM) 11:06:02.801083 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11543): Terminating (SIGTERM) 11:06:02.841436 run iperf3-srv_10.42.42.10(pid=11544): Terminating (SIGTERM) 11:06:02.881639 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11545): Terminating (SIGTERM) 11:06:02.921573 run iperf3-srv_10.42.42.10(pid=11546): Terminating (SIGTERM) 11:06:02.961618 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11547): Terminating (SIGTERM) 11:06:03.001591 run iperf3-srv_10.42.42.10(pid=11548): Terminating (SIGTERM) 11:06:03.041649 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11551): Terminating (SIGTERM) 11:06:03.081725 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11554): Terminating (SIGTERM) 11:06:03.121981 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11557): Terminating (SIGTERM) 11:06:03.131158 --- ParallelTerminationStrategy: PID 11541 died... 11:06:03.185369 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11541): Terminated: ok {rc=0} 11:06:03.194830 --- ParallelTerminationStrategy: PID 11542 died... 11:06:03.248500 run iperf3-srv_10.42.42.10(pid=11542): Terminated {rc=256} 11:06:03.258038 --- ParallelTerminationStrategy: PID 11543 died... 11:06:03.312024 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11543): Terminated: ok {rc=0} 11:06:03.321906 --- ParallelTerminationStrategy: PID 11544 died... 11:06:03.375973 run iperf3-srv_10.42.42.10(pid=11544): Terminated {rc=256} 11:06:03.385883 --- ParallelTerminationStrategy: PID 11545 died... 11:06:03.440200 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11545): Terminated: ok {rc=0} 11:06:03.449877 --- ParallelTerminationStrategy: PID 11546 died... 11:06:03.503977 run iperf3-srv_10.42.42.10(pid=11546): Terminated {rc=256} 11:06:03.513934 --- ParallelTerminationStrategy: PID 11547 died... 11:06:03.567877 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11547): Terminated: ok {rc=0} 11:06:03.577873 --- ParallelTerminationStrategy: PID 11548 died... 11:06:03.631901 run iperf3-srv_10.42.42.10(pid=11548): Terminated {rc=256} 11:06:03.641866 --- ParallelTerminationStrategy: PID 11551 died... 11:06:03.695874 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11551): Terminated: ok {rc=0} 11:06:03.705840 --- ParallelTerminationStrategy: PID 11554 died... 11:06:03.760097 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11554): Terminated: ok {rc=0} 11:06:03.769764 --- ParallelTerminationStrategy: PID 11557 died... 11:06:03.824220 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11557): Terminated: ok {rc=0} 11:06:03.908382 bus /gobi_4: Setting Powered False 11:06:05.017543 bus /gobi_4: Setting Powered False 11:06:06.125426 bus /gobi_1: Setting Powered False 11:06:07.233208 bus /gobi_1: Setting Powered False 11:06:08.341434 bus /gobi_0: Setting Powered False 11:06:09.447182 bus /gobi_0: Setting Powered False 11:06:10.556445 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11555): Process ended prematurely: osmo-stp_10.42.42.5(pid=11555) [trial-2403↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11555)]