Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=4373): Process ended prematurely: osmo-stp_10.42.42.5(pid=4373) [trial-2403↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4373)]
Standard Output
---------------------------------------------- trial-2403 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 10:01:31.065149 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:01:31.077570 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 10:01:31.230168 tst cs_paging_gprs_active.py: using LAC 40153 10:01:31.385858 tst cs_paging_gprs_active.py: using RAC 118 10:01:31.526423 tst cs_paging_gprs_active.py: using CellId 40153 10:01:31.651429 tst cs_paging_gprs_active.py: using BVCI 40154 10:01:31.676158 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:01:31.687552 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:01:31.698758 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:01:31.710166 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:01:31.721578 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:01:31.733122 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:01:31.744622 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:01:31.755971 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:01:31.767687 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:01:31.891634 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:01:32.231990 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:01:32.375905 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:01:32.722537 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4363): Launched 10:01:33.010289 run iperf3-srv_10.42.42.10(pid=4364): Launched 10:01:33.213892 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:01:33.352463 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:01:33.697027 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4365): Launched 10:01:33.982855 run iperf3-srv_10.42.42.10(pid=4366): Launched 10:01:34.186790 tst cs_paging_gprs_active.py:38: start network... 10:01:34.325248 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:01:34.854742 run create_hlr_db(pid=4367): Launched 10:01:35.045559 bus /gobi_6: Setting Powered False 10:01:36.065977 run create_hlr_db(pid=4367): Terminated: ok {rc=0} 10:01:36.507987 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4369): Launched 10:01:36.841484 run osmo-hlr_10.42.42.2(pid=4370): Launched 10:01:36.962013 run osmo-stp_10.42.42.5: Starting osmo-stp 10:01:37.537440 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4372): Launched 10:01:37.869863 run osmo-stp_10.42.42.5(pid=4373): Launched 10:01:37.990290 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:01:38.568504 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4375): Launched 10:01:38.685828 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:01:38.971037 run patchelf(pid=4376): Launched 10:01:39.154545 run osmo-stp_10.42.42.5(pid=4373): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4373)] 10:01:39.288548 run osmo-stp_10.42.42.5(pid=4373): stdout: | (launched: 2022-12-14_10:01:37.705797) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:01:39.422975 run osmo-stp_10.42.42.5(pid=4373): stderr: | �[0;m�[38;5;43m20221214100137903 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214100137904 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214100137904 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214100137904 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214100137905 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214100137905 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214100137905 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:01:39.552599 run osmo-stp_10.42.42.5(pid=4373): stdout: | (launched: 2022-12-14_10:01:37.705797) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:01:39.680597 run osmo-stp_10.42.42.5(pid=4373): stderr: | �[0;m�[38;5;43m20221214100137903 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214100137904 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214100137904 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214100137904 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214100137905 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214100137905 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214100137905 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:01:39.830421 run patchelf(pid=4376): Terminating (SIGINT) 10:01:40.006525 run patchelf(pid=4376): Terminated: ok {rc=0} 10:01:40.039114 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4373): Process ended prematurely: osmo-stp_10.42.42.5(pid=4373) [trial-2403↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4373)] [trial-2403↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 10:01:40.048641 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 10:01:40.110797 run osmo-hlr_10.42.42.2(pid=4370): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4370)] 10:01:40.160775 run osmo-hlr_10.42.42.2(pid=4370): stdout: | (launched: 2022-12-14_10:01:36.675820) 10:01:40.211667 run osmo-hlr_10.42.42.2(pid=4370): stderr: | �[0;m�[1;31m20221214100136880 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214100136880 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214100136880 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214100136880 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214100136880 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214100136880 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214100136893 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214100136901 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214100136901 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214100136901 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:01:40.254692 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4363): Terminating (SIGTERM) 10:01:40.295228 run iperf3-srv_10.42.42.10(pid=4364): Terminating (SIGTERM) 10:01:40.335924 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4365): Terminating (SIGTERM) 10:01:40.376550 run iperf3-srv_10.42.42.10(pid=4366): Terminating (SIGTERM) 10:01:40.417263 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4369): Terminating (SIGTERM) 10:01:40.458359 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4372): Terminating (SIGTERM) 10:01:40.499006 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4375): Terminating (SIGTERM) 10:01:40.508330 --- ParallelTerminationStrategy: PID 4363 died... 10:01:40.563149 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4363): Terminated: ok {rc=0} 10:01:40.572878 --- ParallelTerminationStrategy: PID 4364 died... 10:01:40.627610 run iperf3-srv_10.42.42.10(pid=4364): Terminated {rc=256} 10:01:40.637380 --- ParallelTerminationStrategy: PID 4365 died... 10:01:40.691771 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4365): Terminated: ok {rc=0} 10:01:40.701781 --- ParallelTerminationStrategy: PID 4366 died... 10:01:40.756096 run iperf3-srv_10.42.42.10(pid=4366): Terminated {rc=256} 10:01:40.765738 --- ParallelTerminationStrategy: PID 4369 died... 10:01:40.819577 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4369): Terminated: ok {rc=0} 10:01:40.829159 --- ParallelTerminationStrategy: PID 4372 died... 10:01:40.882963 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4372): Terminated: ok {rc=0} 10:01:40.892526 --- ParallelTerminationStrategy: PID 4375 died... 10:01:40.946492 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4375): Terminated: ok {rc=0} 10:01:41.035572 bus /gobi_0: Setting Powered False 10:01:42.138860 bus /gobi_0: Setting Powered False 10:01:43.244908 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4373): Process ended prematurely: osmo-stp_10.42.42.5(pid=4373) [trial-2403↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4373)]