Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=7464): Process ended prematurely: osmo-stp_10.42.42.5(pid=7464) [trial-2403↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7464)]
Standard Output
---------------------------------------------- trial-2403 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 10:19:04.992680 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:19:05.003936 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 10:19:05.144780 tst cs_paging_gprs_active.py: using LAC 40246 10:19:05.265528 tst cs_paging_gprs_active.py: using RAC 211 10:19:05.385569 tst cs_paging_gprs_active.py: using CellId 40246 10:19:05.504409 tst cs_paging_gprs_active.py: using BVCI 40247 10:19:05.527975 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:19:05.539183 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:19:05.550302 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:19:05.561302 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:19:05.572516 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:19:05.583796 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:19:05.595209 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:19:05.606487 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:19:05.618162 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 10:19:05.739860 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 10:19:06.026500 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:19:06.156314 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:19:06.478675 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7454): Launched 10:19:06.745467 run iperf3-srv_10.42.42.10(pid=7455): Launched 10:19:06.933172 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:19:07.061224 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:19:07.381948 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7456): Launched 10:19:07.648707 run iperf3-srv_10.42.42.10(pid=7457): Launched 10:19:07.836108 tst cs_paging_gprs_active.py:38: start network... 10:19:07.964288 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:19:08.450567 run create_hlr_db(pid=7458): Launched 10:19:08.627781 bus /gobi_6: Setting Powered False 10:19:09.649357 run create_hlr_db(pid=7458): Terminated: ok {rc=0} 10:19:10.087843 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7460): Launched 10:19:10.419442 run osmo-hlr_10.42.42.2(pid=7461): Launched 10:19:10.540805 run osmo-stp_10.42.42.5: Starting osmo-stp 10:19:11.112476 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7463): Launched 10:19:11.442598 run osmo-stp_10.42.42.5(pid=7464): Launched 10:19:11.561583 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:19:12.138242 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7466): Launched 10:19:12.255212 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:19:12.547100 run patchelf(pid=7467): Launched 10:19:12.739811 run osmo-stp_10.42.42.5(pid=7464): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7464)] 10:19:12.880030 run osmo-stp_10.42.42.5(pid=7464): stdout: | (launched: 2022-12-14_10:19:11.279677) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:19:13.020524 run osmo-stp_10.42.42.5(pid=7464): stderr: | �[0;m�[38;5;43m20221214101911473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214101911473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214101911473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214101911474 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214101911474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214101911474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214101911474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:19:13.156153 run osmo-stp_10.42.42.5(pid=7464): stdout: | (launched: 2022-12-14_10:19:11.279677) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:19:13.290660 run osmo-stp_10.42.42.5(pid=7464): stderr: | �[0;m�[38;5;43m20221214101911473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214101911473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214101911473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214101911474 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214101911474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214101911474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214101911474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:19:13.448029 run patchelf(pid=7467): Terminating (SIGINT) 10:19:13.632615 run patchelf(pid=7467): Terminated: ok {rc=0} 10:19:13.666551 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7464): Process ended prematurely: osmo-stp_10.42.42.5(pid=7464) [trial-2403↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7464)] [trial-2403↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 10:19:13.676670 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 10:19:13.740197 run osmo-hlr_10.42.42.2(pid=7461): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7461)] 10:19:13.792613 run osmo-hlr_10.42.42.2(pid=7461): stdout: | (launched: 2022-12-14_10:19:10.255036) 10:19:13.845411 run osmo-hlr_10.42.42.2(pid=7461): stderr: | �[0;m�[1;31m20221214101910453 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214101910453 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214101910453 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214101910453 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214101910453 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214101910453 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214101910466 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214101910474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214101910475 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214101910475 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:19:13.890383 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7454): Terminating (SIGTERM) 10:19:13.932737 run iperf3-srv_10.42.42.10(pid=7455): Terminating (SIGTERM) 10:19:13.975244 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7456): Terminating (SIGTERM) 10:19:14.017700 run iperf3-srv_10.42.42.10(pid=7457): Terminating (SIGTERM) 10:19:14.060151 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7460): Terminating (SIGTERM) 10:19:14.102407 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7463): Terminating (SIGTERM) 10:19:14.144490 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7466): Terminating (SIGTERM) 10:19:14.154355 --- ParallelTerminationStrategy: PID 7454 died... 10:19:14.210915 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7454): Terminated: ok {rc=0} 10:19:14.221216 --- ParallelTerminationStrategy: PID 7455 died... 10:19:14.277095 run iperf3-srv_10.42.42.10(pid=7455): Terminated {rc=256} 10:19:14.287246 --- ParallelTerminationStrategy: PID 7456 died... 10:19:14.343408 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7456): Terminated: ok {rc=0} 10:19:14.353927 --- ParallelTerminationStrategy: PID 7457 died... 10:19:14.410501 run iperf3-srv_10.42.42.10(pid=7457): Terminated {rc=256} 10:19:14.420711 --- ParallelTerminationStrategy: PID 7460 died... 10:19:14.477118 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7460): Terminated: ok {rc=0} 10:19:14.487326 --- ParallelTerminationStrategy: PID 7463 died... 10:19:14.543709 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7463): Terminated: ok {rc=0} 10:19:14.553987 --- ParallelTerminationStrategy: PID 7466 died... 10:19:14.610504 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7466): Terminated: ok {rc=0} 10:19:14.698161 bus /gobi_0: Setting Powered False 10:19:15.805858 bus /gobi_0: Setting Powered False 10:19:16.928166 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7464): Process ended prematurely: osmo-stp_10.42.42.5(pid=7464) [trial-2403↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7464)]