Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=8290): Process ended prematurely: osmo-stp_10.42.42.5(pid=8290) [trial-2403↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8290)]
Standard Output
---------------------------------------------- trial-2403 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 10:26:55.980742 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:26:55.992456 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 10:26:56.160895 tst cs_paging_gprs_active.py: using LAC 40288 10:26:56.290149 tst cs_paging_gprs_active.py: using RAC 253 10:26:56.417887 tst cs_paging_gprs_active.py: using CellId 40288 10:26:56.550224 tst cs_paging_gprs_active.py: using BVCI 40289 10:26:56.575823 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:26:56.587570 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:26:56.598973 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:26:56.611004 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:26:56.622778 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:26:56.634595 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:26:56.646461 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:26:56.658174 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:26:56.670056 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:26:56.790562 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:26:57.073361 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:26:57.200652 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:26:57.520851 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8280): Launched 10:26:57.785075 run iperf3-srv_10.42.42.10(pid=8281): Launched 10:26:57.971540 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:26:58.099349 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:26:58.418512 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8282): Launched 10:26:58.685123 run iperf3-srv_10.42.42.10(pid=8283): Launched 10:26:58.871490 tst cs_paging_gprs_active.py:38: start network... 10:26:58.999580 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:26:59.483446 run create_hlr_db(pid=8284): Launched 10:26:59.659342 bus /gobi_6: Setting Powered False 10:27:00.681138 run create_hlr_db(pid=8284): Terminated: ok {rc=0} 10:27:01.155519 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8286): Launched 10:27:01.679143 run osmo-hlr_10.42.42.2(pid=8287): Launched 10:27:01.883134 run osmo-stp_10.42.42.5: Starting osmo-stp 10:27:02.459621 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8289): Launched 10:27:02.787401 run osmo-stp_10.42.42.5(pid=8290): Launched 10:27:02.904773 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:27:03.477486 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8292): Launched 10:27:03.593817 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:27:03.881152 run patchelf(pid=8293): Launched 10:27:04.072502 run osmo-stp_10.42.42.5(pid=8290): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8290)] 10:27:04.211938 run osmo-stp_10.42.42.5(pid=8290): stdout: | (launched: 2022-12-14_10:27:02.625867) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:27:04.352695 run osmo-stp_10.42.42.5(pid=8290): stderr: | �[0;m�[38;5;43m20221214102702817 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214102702817 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214102702817 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214102702818 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214102702818 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214102702818 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214102702818 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:27:04.487569 run osmo-stp_10.42.42.5(pid=8290): stdout: | (launched: 2022-12-14_10:27:02.625867) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:27:04.622045 run osmo-stp_10.42.42.5(pid=8290): stderr: | �[0;m�[38;5;43m20221214102702817 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214102702817 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214102702817 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214102702818 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214102702818 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214102702818 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214102702818 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:27:04.778508 run patchelf(pid=8293): Terminating (SIGINT) 10:27:04.961826 run patchelf(pid=8293): Terminated: ok {rc=0} 10:27:04.995527 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8290): Process ended prematurely: osmo-stp_10.42.42.5(pid=8290) [trial-2403↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8290)] [trial-2403↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 10:27:05.005635 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 10:27:05.069714 run osmo-hlr_10.42.42.2(pid=8287): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8287)] 10:27:05.121548 run osmo-hlr_10.42.42.2(pid=8287): stdout: | (launched: 2022-12-14_10:27:01.325844) 10:27:05.174081 run osmo-hlr_10.42.42.2(pid=8287): stderr: | �[0;m�[1;31m20221214102701591 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214102701591 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214102701591 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214102701591 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214102701591 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214102701591 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214102701611 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214102701631 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214102701631 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214102701631 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:27:05.219249 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8280): Terminating (SIGTERM) 10:27:05.261523 run iperf3-srv_10.42.42.10(pid=8281): Terminating (SIGTERM) 10:27:05.306337 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8282): Terminating (SIGTERM) 10:27:05.346961 run iperf3-srv_10.42.42.10(pid=8283): Terminating (SIGTERM) 10:27:05.387004 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8286): Terminating (SIGTERM) 10:27:05.427228 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8289): Terminating (SIGTERM) 10:27:05.467403 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8292): Terminating (SIGTERM) 10:27:05.476539 --- ParallelTerminationStrategy: PID 8280 died... 10:27:05.530726 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8280): Terminated: ok {rc=0} 10:27:05.540233 --- ParallelTerminationStrategy: PID 8281 died... 10:27:05.594970 run iperf3-srv_10.42.42.10(pid=8281): Terminated {rc=256} 10:27:05.604455 --- ParallelTerminationStrategy: PID 8282 died... 10:27:05.658343 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8282): Terminated: ok {rc=0} 10:27:05.667901 --- ParallelTerminationStrategy: PID 8283 died... 10:27:05.721737 run iperf3-srv_10.42.42.10(pid=8283): Terminated {rc=256} 10:27:05.731276 --- ParallelTerminationStrategy: PID 8286 died... 10:27:05.785233 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8286): Terminated: ok {rc=0} 10:27:05.794811 --- ParallelTerminationStrategy: PID 8289 died... 10:27:05.849045 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8289): Terminated: ok {rc=0} 10:27:05.858557 --- ParallelTerminationStrategy: PID 8292 died... 10:27:05.912440 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8292): Terminated: ok {rc=0} 10:27:06.001585 bus /gobi_0: Setting Powered False 10:27:07.102970 bus /gobi_0: Setting Powered False 10:27:08.214134 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8290): Process ended prematurely: osmo-stp_10.42.42.5(pid=8290) [trial-2403↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8290)]