Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=8151): Process ended prematurely: osmo-stp_10.42.42.5(pid=8151) [trial-2403↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8151)]
Standard Output
---------------------------------------------- trial-2403 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 10:24:55.863055 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:24:55.874548 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 10:24:56.028632 tst cs_paging_gprs_active.py: using LAC 40278 10:24:56.167957 tst cs_paging_gprs_active.py: using RAC 243 10:24:56.295716 tst cs_paging_gprs_active.py: using CellId 40278 10:24:56.419518 tst cs_paging_gprs_active.py: using BVCI 40279 10:24:56.443175 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:24:56.454406 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:24:56.465364 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:24:56.476151 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:24:56.487375 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:24:56.498453 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:24:56.509555 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:24:56.520451 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:24:56.531650 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:24:56.652597 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:24:56.936362 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:24:57.064589 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:24:57.385255 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8138): Launched 10:24:57.652444 run iperf3-srv_10.42.42.10(pid=8139): Launched 10:24:57.839484 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:24:57.966723 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:24:58.285703 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8140): Launched 10:24:58.550036 run iperf3-srv_10.42.42.10(pid=8141): Launched 10:24:58.735863 tst cs_paging_gprs_active.py:38: start network... 10:24:58.863007 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:24:59.347247 run create_hlr_db(pid=8142): Launched 10:24:59.524207 bus /gobi_6: Setting Powered False 10:25:00.545649 run create_hlr_db(pid=8142): Terminated: ok {rc=0} 10:25:01.013653 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8144): Launched 10:25:01.498798 run osmo-hlr_10.42.42.2(pid=8147): Launched 10:25:01.672040 run osmo-stp_10.42.42.5: Starting osmo-stp 10:25:02.330831 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8150): Launched 10:25:02.660603 run osmo-stp_10.42.42.5(pid=8151): Launched 10:25:02.791349 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:25:03.361929 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8153): Launched 10:25:03.477626 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:25:03.756304 run patchelf(pid=8154): Launched 10:25:03.936755 run osmo-stp_10.42.42.5(pid=8151): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8151)] 10:25:04.068760 run osmo-stp_10.42.42.5(pid=8151): stdout: | (launched: 2022-12-14_10:25:02.499422) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:25:04.201108 run osmo-stp_10.42.42.5(pid=8151): stderr: | �[0;m�[38;5;43m20221214102502692 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214102502692 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214102502693 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214102502693 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214102502694 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214102502694 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214102502694 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:25:04.328489 run osmo-stp_10.42.42.5(pid=8151): stdout: | (launched: 2022-12-14_10:25:02.499422) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:25:04.454665 run osmo-stp_10.42.42.5(pid=8151): stderr: | �[0;m�[38;5;43m20221214102502692 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214102502692 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214102502693 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214102502693 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214102502694 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214102502694 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214102502694 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:25:04.601896 run patchelf(pid=8154): Terminating (SIGINT) 10:25:04.775507 run patchelf(pid=8154): Terminated: ok {rc=0} 10:25:04.807315 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8151): Process ended prematurely: osmo-stp_10.42.42.5(pid=8151) [trial-2403↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8151)] [trial-2403↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 10:25:04.816816 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 10:25:04.877778 run osmo-hlr_10.42.42.2(pid=8147): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8147)] 10:25:04.927432 run osmo-hlr_10.42.42.2(pid=8147): stdout: | (launched: 2022-12-14_10:25:01.227953) 10:25:04.978056 run osmo-hlr_10.42.42.2(pid=8147): stderr: | �[0;m�[1;31m20221214102501470 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214102501470 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214102501470 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214102501470 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214102501470 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214102501470 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214102501487 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214102501502 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214102501502 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214102501502 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:25:05.021169 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8138): Terminating (SIGTERM) 10:25:05.061534 run iperf3-srv_10.42.42.10(pid=8139): Terminating (SIGTERM) 10:25:05.102158 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8140): Terminating (SIGTERM) 10:25:05.142624 run iperf3-srv_10.42.42.10(pid=8141): Terminating (SIGTERM) 10:25:05.183183 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8144): Terminating (SIGTERM) 10:25:05.223595 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8150): Terminating (SIGTERM) 10:25:05.264132 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8153): Terminating (SIGTERM) 10:25:05.273415 --- ParallelTerminationStrategy: PID 8138 died... 10:25:05.328308 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8138): Terminated: ok {rc=0} 10:25:05.338068 --- ParallelTerminationStrategy: PID 8139 died... 10:25:05.392038 run iperf3-srv_10.42.42.10(pid=8139): Terminated {rc=256} 10:25:05.401966 --- ParallelTerminationStrategy: PID 8140 died... 10:25:05.455931 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8140): Terminated: ok {rc=0} 10:25:05.465890 --- ParallelTerminationStrategy: PID 8141 died... 10:25:05.519924 run iperf3-srv_10.42.42.10(pid=8141): Terminated {rc=256} 10:25:05.529928 --- ParallelTerminationStrategy: PID 8144 died... 10:25:05.584080 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8144): Terminated: ok {rc=0} 10:25:05.593742 --- ParallelTerminationStrategy: PID 8150 died... 10:25:05.647490 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8150): Terminated: ok {rc=0} 10:25:05.657119 --- ParallelTerminationStrategy: PID 8153 died... 10:25:05.711025 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8153): Terminated: ok {rc=0} 10:25:05.800219 bus /gobi_0: Setting Powered False 10:25:06.904430 bus /gobi_0: Setting Powered False 10:25:08.016434 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8151): Process ended prematurely: osmo-stp_10.42.42.5(pid=8151) [trial-2403↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8151)]