Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=17961): Process ended prematurely: osmo-stp_10.42.42.5(pid=17961) [trial-2404↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17961)]
Standard Output
---------------------------------------------- trial-2404 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 11:48:12.969672 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:48:12.980158 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 11:48:13.127731 tst cs_paging_gprs_active.py: using LAC 40687 11:48:13.253247 tst cs_paging_gprs_active.py: using RAC 142 11:48:13.374932 tst cs_paging_gprs_active.py: using CellId 40687 11:48:13.499183 tst cs_paging_gprs_active.py: using BVCI 40688 11:48:13.522801 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:48:13.533482 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:48:13.543911 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:48:13.554331 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:48:13.565731 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:48:13.576781 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:48:13.588131 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:48:13.599295 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:48:13.610577 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 11:48:13.734589 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 11:48:14.035832 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:48:14.175192 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:48:14.519547 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17951): Launched 11:48:14.805438 run iperf3-srv_10.42.42.10(pid=17952): Launched 11:48:15.009005 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:48:15.147545 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:48:15.491933 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17953): Launched 11:48:15.777888 run iperf3-srv_10.42.42.10(pid=17954): Launched 11:48:16.007578 tst cs_paging_gprs_active.py:38: start network... 11:48:16.140141 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:48:16.681338 run create_hlr_db(pid=17955): Launched 11:48:16.865522 bus /sierra_2: Setting Powered False 11:48:17.892315 run create_hlr_db(pid=17955): Terminated: ok {rc=0} 11:48:18.308477 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17957): Launched 11:48:18.620373 run osmo-hlr_10.42.42.2(pid=17958): Launched 11:48:18.741729 run osmo-stp_10.42.42.5: Starting osmo-stp 11:48:19.285731 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17960): Launched 11:48:19.596540 run osmo-stp_10.42.42.5(pid=17961): Launched 11:48:19.709612 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:48:20.252647 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17963): Launched 11:48:20.363181 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:48:20.636641 run patchelf(pid=17964): Launched 11:48:20.818755 run osmo-stp_10.42.42.5(pid=17961): ERR: Terminated: ERROR {rc=1} [trial-2404↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17961)] 11:48:20.951693 run osmo-stp_10.42.42.5(pid=17961): stdout: | (launched: 2022-12-14_11:48:19.442310) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:48:21.085898 run osmo-stp_10.42.42.5(pid=17961): stderr: | �[0;m�[38;5;43m20221214114819610 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214114819610 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214114819610 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214114819611 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214114819611 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214114819611 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214114819611 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:48:21.214396 run osmo-stp_10.42.42.5(pid=17961): stdout: | (launched: 2022-12-14_11:48:19.442310) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:48:21.341503 run osmo-stp_10.42.42.5(pid=17961): stderr: | �[0;m�[38;5;43m20221214114819610 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214114819610 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214114819610 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214114819611 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214114819611 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214114819611 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214114819611 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:48:21.489569 run patchelf(pid=17964): Terminating (SIGINT) 11:48:21.663588 run patchelf(pid=17964): Terminated: ok {rc=0} 11:48:21.695730 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=17961): Process ended prematurely: osmo-stp_10.42.42.5(pid=17961) [trial-2404↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17961)] [trial-2404↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 11:48:21.705118 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 11:48:21.766229 run osmo-hlr_10.42.42.2(pid=17958): ERR: Terminated: ERROR {rc=237} [trial-2404↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17958)] 11:48:21.815853 run osmo-hlr_10.42.42.2(pid=17958): stdout: | (launched: 2022-12-14_11:48:18.465246) 11:48:21.866060 run osmo-hlr_10.42.42.2(pid=17958): stderr: | �[0;m�[1;31m20221214114818640 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214114818640 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214114818640 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214114818640 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214114818640 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214114818641 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214114818652 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2404/run.2022-12-14_11-25-45/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214114818660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214114818660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214114818660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:48:21.908939 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17951): Terminating (SIGTERM) 11:48:21.949452 run iperf3-srv_10.42.42.10(pid=17952): Terminating (SIGTERM) 11:48:21.991771 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17953): Terminating (SIGTERM) 11:48:22.032722 run iperf3-srv_10.42.42.10(pid=17954): Terminating (SIGTERM) 11:48:22.073423 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17957): Terminating (SIGTERM) 11:48:22.114334 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17960): Terminating (SIGTERM) 11:48:22.155174 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17963): Terminating (SIGTERM) 11:48:22.164394 --- ParallelTerminationStrategy: PID 17951 died... 11:48:22.218388 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17951): Terminated: ok {rc=0} 11:48:22.227903 --- ParallelTerminationStrategy: PID 17952 died... 11:48:22.281415 run iperf3-srv_10.42.42.10(pid=17952): Terminated {rc=256} 11:48:22.290759 --- ParallelTerminationStrategy: PID 17953 died... 11:48:22.343921 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17953): Terminated: ok {rc=0} 11:48:22.353418 --- ParallelTerminationStrategy: PID 17954 died... 11:48:22.406749 run iperf3-srv_10.42.42.10(pid=17954): Terminated {rc=256} 11:48:22.416233 --- ParallelTerminationStrategy: PID 17957 died... 11:48:22.469589 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17957): Terminated: ok {rc=0} 11:48:22.479049 --- ParallelTerminationStrategy: PID 17960 died... 11:48:22.532365 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17960): Terminated: ok {rc=0} 11:48:22.541898 --- ParallelTerminationStrategy: PID 17963 died... 11:48:22.596031 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17963): Terminated: ok {rc=0} 11:48:22.680460 bus /gobi_0: Setting Powered False 11:48:23.788869 bus /gobi_0: Setting Powered False 11:48:24.900475 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17961): Process ended prematurely: osmo-stp_10.42.42.5(pid=17961) [trial-2404↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17961)]