Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=3764): Process ended prematurely: osmo-stp_10.42.42.5(pid=3764) [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3764)]
Standard Output
---------------------------------------------- trial-2406 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 14:55:01.169466 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:55:01.180456 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 14:55:01.361127 tst cs_paging_gprs_active.py: using LAC 41671 14:55:01.500794 tst cs_paging_gprs_active.py: using RAC 106 14:55:01.632242 tst cs_paging_gprs_active.py: using CellId 41671 14:55:01.782524 tst cs_paging_gprs_active.py: using BVCI 41672 14:55:01.815753 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:55:01.830505 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:55:01.845869 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:55:01.858189 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:55:01.870505 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:55:01.882943 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:55:01.895195 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:55:01.907231 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:55:01.919282 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 14:55:02.064211 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 14:55:02.348776 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 14:55:02.474989 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:55:02.788269 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3754): Launched 14:55:03.049427 run iperf3-srv_10.42.42.10(pid=3755): Launched 14:55:03.233281 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 14:55:03.358685 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:55:03.671761 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3756): Launched 14:55:03.932157 run iperf3-srv_10.42.42.10(pid=3757): Launched 14:55:04.115811 tst cs_paging_gprs_active.py:38: start network... 14:55:04.241174 run osmo-hlr_10.42.42.2: Starting osmo-hlr 14:55:04.734235 run create_hlr_db(pid=3758): Launched 14:55:04.921331 bus /gobi_6: Setting Powered False 14:55:05.942026 run create_hlr_db(pid=3758): Terminated: ok {rc=0} 14:55:06.371685 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3760): Launched 14:55:06.694752 run osmo-hlr_10.42.42.2(pid=3761): Launched 14:55:06.815793 run osmo-stp_10.42.42.5: Starting osmo-stp 14:55:07.376338 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3763): Launched 14:55:07.701025 run osmo-stp_10.42.42.5(pid=3764): Launched 14:55:07.818361 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 14:55:08.383749 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3766): Launched 14:55:08.499144 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 14:55:08.782906 run patchelf(pid=3767): Launched 14:55:08.972718 run osmo-stp_10.42.42.5(pid=3764): ERR: Terminated: ERROR {rc=1} [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3764)] 14:55:09.110630 run osmo-stp_10.42.42.5(pid=3764): stdout: | (launched: 2022-12-14_14:55:07.541098) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:55:09.248445 run osmo-stp_10.42.42.5(pid=3764): stderr: | �[0;m�[38;5;43m20221214145507734 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214145507734 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214145507734 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214145507735 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214145507735 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214145507736 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214145507736 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:55:09.382323 run osmo-stp_10.42.42.5(pid=3764): stdout: | (launched: 2022-12-14_14:55:07.541098) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:55:09.515091 run osmo-stp_10.42.42.5(pid=3764): stderr: | �[0;m�[38;5;43m20221214145507734 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214145507734 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214145507734 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214145507735 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214145507735 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214145507736 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214145507736 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:55:09.669908 run patchelf(pid=3767): Terminating (SIGINT) 14:55:09.850914 run patchelf(pid=3767): Terminated: ok {rc=0} 14:55:09.884064 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=3764): Process ended prematurely: osmo-stp_10.42.42.5(pid=3764) [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3764)] [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 14:55:09.893922 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 14:55:09.957495 run osmo-hlr_10.42.42.2(pid=3761): ERR: Terminated: ERROR {rc=237} [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3761)] 14:55:10.009152 run osmo-hlr_10.42.42.2(pid=3761): stdout: | (launched: 2022-12-14_14:55:06.535956) 14:55:10.061328 run osmo-hlr_10.42.42.2(pid=3761): stderr: | �[0;m�[1;31m20221214145506734 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214145506734 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214145506734 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214145506734 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214145506734 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214145506734 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214145506746 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2406/run.2022-12-14_14-20-43/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214145506754 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214145506754 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214145506754 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 14:55:10.106043 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3754): Terminating (SIGTERM) 14:55:10.148444 run iperf3-srv_10.42.42.10(pid=3755): Terminating (SIGTERM) 14:55:10.190537 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3756): Terminating (SIGTERM) 14:55:10.232342 run iperf3-srv_10.42.42.10(pid=3757): Terminating (SIGTERM) 14:55:10.274730 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3760): Terminating (SIGTERM) 14:55:10.316708 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3763): Terminating (SIGTERM) 14:55:10.358759 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3766): Terminating (SIGTERM) 14:55:10.368448 --- ParallelTerminationStrategy: PID 3754 died... 14:55:10.424231 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3754): Terminated: ok {rc=0} 14:55:10.434226 --- ParallelTerminationStrategy: PID 3755 died... 14:55:10.489534 run iperf3-srv_10.42.42.10(pid=3755): Terminated {rc=256} 14:55:10.499473 --- ParallelTerminationStrategy: PID 3756 died... 14:55:10.555056 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3756): Terminated: ok {rc=0} 14:55:10.565127 --- ParallelTerminationStrategy: PID 3757 died... 14:55:10.621027 run iperf3-srv_10.42.42.10(pid=3757): Terminated {rc=256} 14:55:10.630954 --- ParallelTerminationStrategy: PID 3760 died... 14:55:10.686251 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3760): Terminated: ok {rc=0} 14:55:10.696222 --- ParallelTerminationStrategy: PID 3763 died... 14:55:10.751974 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3763): Terminated: ok {rc=0} 14:55:10.762000 --- ParallelTerminationStrategy: PID 3766 died... 14:55:10.817373 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3766): Terminated: ok {rc=0} 14:55:10.904258 bus /gobi_0: Setting Powered False 14:55:12.011222 bus /gobi_0: Setting Powered False 14:55:13.120100 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3764): Process ended prematurely: osmo-stp_10.42.42.5(pid=3764) [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3764)]