(launched: 2020-11-19_00:59:21.348351)
linux; GNU C++ version 6.3.0 20170221; Boost_106200; UHD_003.009.005-0-unknown

% 'rt-prio 18' is deprecated, use 'policy rr 18' under 'sched' node instead
20201119005921753 [1;33mDLGLOBAL[0;m <0008> telnet_interface.c:104 Available via telnet 10.42.42.116 4237
20201119005921753 [1;33mDLCTRL[0;m <000f> control_if.c:911 CTRL at 10.42.42.116 4236
20201119005921753 [1;32mDMAIN[0;m <0000> osmo-trx.cpp:484 SSE3 support compiled in and supported by CPU
20201119005921753 [1;32mDMAIN[0;m <0000> osmo-trx.cpp:496 SSE4.1 support compiled in and supported by CPU
20201119005921753 [1;32mDMAIN[0;m <0000> osmo-trx.cpp:550 [tid=140246719341888] Config Settings
   Log Level............... 0
   Device args............. type=b200,serial=306BD11
   TRX Base Port........... 5700
   TRX Address............. 10.42.42.116
   GSM BTS Address......... 10.42.42.50
   Channels................ 1
   Tx Samples-per-Symbol... 4
   Rx Samples-per-Symbol... 4
   EDGE support............ 0
   Extended RACH support... 0
   Reference............... 1
   Filler Burst Type....... Empty bursts
   Filler Burst TSC........ 0
   Filler Burst RACH Delay. 0
   Multi-Carrier........... 0
   Tuning offset........... 0
   RSSI to dBm offset...... 0 (relative)
   Swap channels........... 0
   Tx Antennas............. '<default>'
   Rx Antennas............. '<default>'

20201119005921753 [1;32mDMAIN[0;m <0000> osmo-trx.cpp:470 [tid=140246719341888] Setting SCHED_RR priority 18. This setting is DEPRECATED, please use 'policy rr 18' under the 'sched' VTY node instead.
20201119005921771 [1;32mDDEV[0;m <0005> UHDDevice.cpp:571 [tid=140246719341888] Using discovered UHD device type=b200,name=,serial=306BD11,product=B200
20201119005921802 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140246719341888] Detected Device: B200
20201119005921879 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140246719341888] Operating over USB 3.
20201119005921900 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140246719341888] Initialize CODEC control...
20201119005922166 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140246719341888] Initialize Radio control...
20201119005922196 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140246719341888] Performing register loopback test... 
20201119005922204 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140246719341888] pass
20201119005922205 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140246719341888] Performing CODEC loopback test... 
20201119005922212 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140246719341888] pass
20201119005922212 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140246719341888] Asking for clock rate 16.000000 MHz... 
20201119005922534 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140246719341888] 
Actually got clock rate 16.000000 MHz.
20201119005922534 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140246719341888] Performing timer loopback test... 
20201119005922635 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140246719341888] pass
20201119005922685 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140246719341888] Setting master clock rate selection to 'automatic'.
20201119005922685 [1;32mDMAIN[0;m <0000> UHDDevice.cpp:222 [tid=140246719341888] Antennas configured successfully
20201119005922692 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140246719341888] Asking for clock rate 26.000000 MHz... 
20201119005922952 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140246719341888] 
Actually got clock rate 26.000000 MHz.
20201119005922952 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140246719341888] Performing timer loopback test... 
20201119005923052 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140246719341888] pass
20201119005923052 [1;32mDDEV[0;m <0005> UHDDevice.cpp:345 [tid=140246719341888] Rates configured for B200 4 SPS
20201119005923097 [1;32mDDEV[0;m <0005> UHDDevice.cpp:305 [tid=140246719341888] Supported Tx gain range [0; 89.75]
20201119005923097 [1;32mDDEV[0;m <0005> UHDDevice.cpp:310 [tid=140246719341888] Supported Rx gain range [0; 76]
20201119005923097 [1;32mDDEV[0;m <0005> UHDDevice.cpp:314 [tid=140246719341888] Default setting Tx gain for channel 0 to 44.875
20201119005923097 [1;32mDDEV[0;m <0005> UHDDevice.cpp:321 [tid=140246719341888] Default setting Rx gain for channel 0 to 38
20201119005923098 [1;32mDDEV[0;m <0005> UHDDevice.cpp:670 [tid=140246719341888] Device configuration: Single USRP:
  Device: B-Series Device
  Mboard 0: B200
  RX Channel: 0
    RX DSP: 0
    RX Dboard: A
    RX Subdev: FE-RX2
  TX Channel: 0
    TX DSP: 0
    TX Dboard: A
    TX Subdev: FE-TX2
20201119005923106 [1;33mDMAIN[0;m <0000> osmo-trx.cpp:598 [tid=140246719341888] -- Transceiver active with 1 channel(s)
[1;33m20201119005925113 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140246719341888][chan=0] command is 'POWEROFF'
[0;m[1;33m20201119005925113 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140246719341888][chan=0] response is 'RSP POWEROFF 0'
[0;m[1;33m20201119005925114 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140246719341888][chan=0] command is 'RFMUTE 1'
[0;m[1;33m20201119005925114 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140246719341888][chan=0] response is 'RSP RFMUTE 0 1'
[0;m[1;33m20201119005925130 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140246719341888][chan=0] command is 'SETFORMAT 1'
[0;m[1;33m20201119005925130 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1004 [tid=140246719341888][chan=0] BTS requests TRXD version switch: 1
[0;m[1;33m20201119005925130 [1;33mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1010 [tid=140246719341888][chan=0] switching to TRXD version 1
[0;m[1;33m20201119005925130 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140246719341888][chan=0] response is 'RSP SETFORMAT 1 1'
[0;m[1;33m20201119005925153 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140246719341888][chan=0] command is 'RXTUNE 1781400'
[0;m20201119005925324 [1;32mDDEV[0;m <0005> UHDDevice.cpp:1032 [tid=140246719341888][chan=0] set_freq(1.7814e+09, Rx): Tune Result:
    Target RF  Freq: 1781.400000 (MHz)
    Actual RF  Freq: 1781.399999 (MHz)
    Target DSP Freq: -0.000001 (MHz)
    Actual DSP Freq: -0.000001 (MHz)

[1;33m20201119005925324 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140246719341888][chan=0] response is 'RSP RXTUNE 0 1781400'
[0;m[1;33m20201119005925325 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140246719341888][chan=0] command is 'TXTUNE 1876400'
[0;m20201119005925349 [1;32mDDEV[0;m <0005> UHDDevice.cpp:1032 [tid=140246719341888][chan=0] set_freq(1.8764e+09, Tx): Tune Result:
    Target RF  Freq: 1876.400000 (MHz)
    Actual RF  Freq: 1876.399999 (MHz)
    Target DSP Freq: 0.000001 (MHz)
    Actual DSP Freq: 0.000001 (MHz)

[1;33m20201119005925349 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140246719341888][chan=0] response is 'RSP TXTUNE 0 1876400'
[0;m[1;33m20201119005925350 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140246719341888][chan=0] command is 'RFMUTE 0'
[0;m[1;33m20201119005925350 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140246719341888][chan=0] response is 'RSP RFMUTE 0 0'
[0;m[1;33m20201119005925350 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140246719341888][chan=0] command is 'SETTSC 7'
[0;m[1;33m20201119005925350 [1;33mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:983 [tid=140246719341888] Changing TSC from 0 to 7
[0;m[1;33m20201119005925350 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140246719341888][chan=0] response is 'RSP SETTSC 0 7'
[0;m[1;33m20201119005925351 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140246719341888][chan=0] command is 'RFMUTE 1'
[0;m[1;33m20201119005925351 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140246719341888][chan=0] response is 'RSP RFMUTE 0 1'
[0;m[1;33m20201119005925352 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140246719341888][chan=0] command is 'NOMTXPOWER'
[0;m[1;33m20201119005925352 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140246719341888][chan=0] response is 'RSP NOMTXPOWER 0 7'
[0;m[1;33m20201119005925353 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140246719341888][chan=0] command is 'POWERON'
[0;m20201119005925353 [1;33mDMAIN[0;m <0000> Transceiver.cpp:290 [tid=140246719341888] Starting the transceiver
20201119005925353 [1;32mDMAIN[0;m <0000> radioInterface.cpp:195 [tid=140246719341888] Starting radio device
20201119005925353 [1;32mDDEV[0;m <0005> UHDDevice.cpp:741 [tid=140246719341888] Starting USRP...
20201119005925353 [1;32mDMAIN[0;m <0000> Threads.cpp:119 [tid=140246554941184] Thread 140246554941184 (task 19809) set name: UHDAsyncEvent
20201119005925474 [1;32mDDEV[0;m <0005> UHDDevice.cpp:716 [tid=140246719341888] Initial timestamp 3813543
20201119005925474 [1;32mDDEV[0;m <0005> UHDDevice.cpp:758 [tid=140246719341888] The current time is 3.52244 seconds
20201119005925474 [1;32mDMAIN[0;m <0000> radioInterface.cpp:216 [tid=140246719341888] Radio started
20201119005925474 [1;32mDMAIN[0;m <0000> Threads.cpp:119 [tid=140246546548480] Thread 140246546548480 (task 19810) set name: TxLower
20201119005925474 [1;32mDMAIN[0;m <0000> Threads.cpp:119 [tid=140246538155776] Thread 140246538155776 (task 19811) set name: RxLower
[1;33m20201119005925474 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140246719341888][chan=0] response is 'RSP POWERON 0'
[0;m20201119005925474 [1;32mDMAIN[0;m <0000> Threads.cpp:119 [tid=140246184359680] Thread 140246184359680 (task 19813) set name: TxUpper0
20201119005925474 [1;32mDMAIN[0;m <0000> Threads.cpp:119 [tid=140246529763072] Thread 140246529763072 (task 19812) set name: RxUpper0
20201119005925476 [1;33mDTRXCLK[0;m <0001> Transceiver.cpp:1149 [tid=140246538155776] Sending CLOCK indications
20201119005925476 [1;32mDTRXCLK[0;m <0001> Transceiver.cpp:1268 [tid=140246538155776] sending IND CLOCK 2158509
[1;33m20201119005925477 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140246719341888][chan=0] command is 'SETPOWER 0'
[0;m20201119005925477 [1;32mDDEV[0;m <0005> UHDDevice.cpp:420 [tid=140246719341888] Set TX gain to 89.75dB, ~7.5 dBm (asked for 89.75 dB, ~7.5 dBm)
[1;33m20201119005925477 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140246719341888][chan=0] response is 'RSP SETPOWER 0 0'
[0;m[1;33m20201119005925511 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140246719341888][chan=0] command is 'SETRXGAIN 50'
[0;m20201119005925512 [1;32mDDEV[0;m <0005> UHDDevice.cpp:358 [tid=140246719341888] Set RX gain to 50dB (asked for 50dB)
[1;33m20201119005925512 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140246719341888][chan=0] response is 'RSP SETRXGAIN 0 50'
[0;m[1;33m20201119005925512 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140246719341888][chan=0] command is 'SETSLOT 0 5'
[0;m[1;33m20201119005925512 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140246719341888][chan=0] response is 'RSP SETSLOT 0 0 5'
[0;m[1;33m20201119005925513 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140246719341888][chan=0] command is 'SETSLOT 1 1'
[0;m[1;33m20201119005925513 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140246719341888][chan=0] response is 'RSP SETSLOT 0 1 1'
[0;m[1;33m20201119005925514 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140246719341888][chan=0] command is 'SETSLOT 2 1'
[0;m[1;33m20201119005925514 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140246719341888][chan=0] response is 'RSP SETSLOT 0 2 1'
[0;m[1;33m20201119005925514 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140246719341888][chan=0] command is 'SETSLOT 3 1'
[0;m[1;33m20201119005925514 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140246719341888][chan=0] response is 'RSP SETSLOT 0 3 1'
[0;m[1;33m20201119005925515 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140246719341888][chan=0] command is 'SETSLOT 4 8'
[0;m[1;33m20201119005925515 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140246719341888][chan=0] response is 'RSP SETSLOT 0 4 8'
[0;m[1;33m20201119005925515 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140246719341888][chan=0] command is 'SETSLOT 5 3'
[0;m[1;33m20201119005925515 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140246719341888][chan=0] response is 'RSP SETSLOT 0 5 3'
[0;m[1;33m20201119005925516 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140246719341888][chan=0] command is 'SETSLOT 6 7'
[0;m[1;33m20201119005925516 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140246719341888][chan=0] response is 'RSP SETSLOT 0 6 7'
[0;m[1;33m20201119005925516 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140246719341888][chan=0] command is 'SETSLOT 7 13'
[0;m[1;33m20201119005925516 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140246719341888][chan=0] response is 'RSP SETSLOT 0 7 13'
[0;m20201119005926474 [1;32mDTRXCLK[0;m <0001> Transceiver.cpp:1268 [tid=140246538155776] sending IND CLOCK 2158725
20201119005927474 [1;32mDTRXCLK[0;m <0001> Transceiver.cpp:1268 [tid=140246538155776] sending IND CLOCK 2158941
20201119005928293 [1;33mDTRXDDL[0;m <0003> Transceiver.cpp:1049 [tid=140246184359680][chan=0] mDataSockets read(18) failed: -1
20201119005928293 [1;31mDTRXDDL[0;m <0003> Transceiver.cpp:1345 [tid=140246184359680][chan=0] Something went wrong in thread TxUpper0, requesting stop
20201119005928295 [1;33mDMAIN[0;m <0000> proto_trxd.c:113 [tid=19797][chan=0] mDataSockets write(18) failed: -1
20201119005928295 [1;31mDTRXDUL[0;m <0004> Transceiver.cpp:1294 [tid=140246529763072][chan=0] Something went wrong in thread RxUpper0, requesting stop
20201119005928474 [1;32mDTRXCLK[0;m <0001> Transceiver.cpp:1268 [tid=140246538155776] sending IND CLOCK 2159158
20201119005929106 [1;33mDMAIN[0;m <0000> osmo-trx.cpp:555 [tid=140246719341888] Shutting down transceiver...
20201119005929106 [1;33mDMAIN[0;m <0000> Transceiver.cpp:348 [tid=140246719341888] Stopping the transceiver
20201119005929106 [1;32mDMAIN[0;m <0000> Transceiver.cpp:361 [tid=140246719341888] Stopping the device
20201119005929113 [1;33mDMAIN[0;m <0000> Transceiver.cpp:374 [tid=140246719341888] Transceiver stopped
