(launched: 2020-11-19_00:59:53.974994)
linux; GNU C++ version 6.3.0 20170221; Boost_106200; UHD_003.009.005-0-unknown

% 'rt-prio 18' is deprecated, use 'policy rr 18' under 'sched' node instead
20201119005954369 [1;33mDLGLOBAL[0;m <0008> telnet_interface.c:104 Available via telnet 10.42.42.116 4237
20201119005954369 [1;33mDLCTRL[0;m <000f> control_if.c:911 CTRL at 10.42.42.116 4236
20201119005954369 [1;32mDMAIN[0;m <0000> osmo-trx.cpp:484 SSE3 support compiled in and supported by CPU
20201119005954369 [1;32mDMAIN[0;m <0000> osmo-trx.cpp:496 SSE4.1 support compiled in and supported by CPU
20201119005954369 [1;32mDMAIN[0;m <0000> osmo-trx.cpp:550 [tid=140370139542848] Config Settings
   Log Level............... 0
   Device args............. type=b200,serial=306BD11
   TRX Base Port........... 5700
   TRX Address............. 10.42.42.116
   GSM BTS Address......... 10.42.42.50
   Channels................ 1
   Tx Samples-per-Symbol... 4
   Rx Samples-per-Symbol... 4
   EDGE support............ 0
   Extended RACH support... 0
   Reference............... 1
   Filler Burst Type....... Empty bursts
   Filler Burst TSC........ 0
   Filler Burst RACH Delay. 0
   Multi-Carrier........... 0
   Tuning offset........... 0
   RSSI to dBm offset...... 0 (relative)
   Swap channels........... 0
   Tx Antennas............. '<default>'
   Rx Antennas............. '<default>'

20201119005954369 [1;32mDMAIN[0;m <0000> osmo-trx.cpp:470 [tid=140370139542848] Setting SCHED_RR priority 18. This setting is DEPRECATED, please use 'policy rr 18' under the 'sched' VTY node instead.
20201119005954388 [1;32mDDEV[0;m <0005> UHDDevice.cpp:571 [tid=140370139542848] Using discovered UHD device type=b200,name=,serial=306BD11,product=B200
20201119005954420 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140370139542848] Detected Device: B200
20201119005954498 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140370139542848] Operating over USB 3.
20201119005954520 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140370139542848] Initialize CODEC control...
20201119005954785 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140370139542848] Initialize Radio control...
20201119005954815 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140370139542848] Performing register loopback test... 
20201119005954823 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140370139542848] pass
20201119005954824 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140370139542848] Performing CODEC loopback test... 
20201119005954830 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140370139542848] pass
20201119005954831 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140370139542848] Asking for clock rate 16.000000 MHz... 
20201119005955153 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140370139542848] 
Actually got clock rate 16.000000 MHz.
20201119005955153 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140370139542848] Performing timer loopback test... 
20201119005955253 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140370139542848] pass
20201119005955303 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140370139542848] Setting master clock rate selection to 'automatic'.
20201119005955303 [1;32mDMAIN[0;m <0000> UHDDevice.cpp:222 [tid=140370139542848] Antennas configured successfully
20201119005955311 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140370139542848] Asking for clock rate 26.000000 MHz... 
20201119005955570 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140370139542848] 
Actually got clock rate 26.000000 MHz.
20201119005955570 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140370139542848] Performing timer loopback test... 
20201119005955670 [1;32mDDEVDRV[0;m <0006> UHDDevice.cpp:197 [tid=140370139542848] pass
20201119005955671 [1;32mDDEV[0;m <0005> UHDDevice.cpp:345 [tid=140370139542848] Rates configured for B200 4 SPS
20201119005955715 [1;32mDDEV[0;m <0005> UHDDevice.cpp:305 [tid=140370139542848] Supported Tx gain range [0; 89.75]
20201119005955715 [1;32mDDEV[0;m <0005> UHDDevice.cpp:310 [tid=140370139542848] Supported Rx gain range [0; 76]
20201119005955715 [1;32mDDEV[0;m <0005> UHDDevice.cpp:314 [tid=140370139542848] Default setting Tx gain for channel 0 to 44.875
20201119005955716 [1;32mDDEV[0;m <0005> UHDDevice.cpp:321 [tid=140370139542848] Default setting Rx gain for channel 0 to 38
20201119005955716 [1;32mDDEV[0;m <0005> UHDDevice.cpp:670 [tid=140370139542848] Device configuration: Single USRP:
  Device: B-Series Device
  Mboard 0: B200
  RX Channel: 0
    RX DSP: 0
    RX Dboard: A
    RX Subdev: FE-RX2
  TX Channel: 0
    TX DSP: 0
    TX Dboard: A
    TX Subdev: FE-TX2
20201119005955725 [1;33mDMAIN[0;m <0000> osmo-trx.cpp:598 [tid=140370139542848] -- Transceiver active with 1 channel(s)
[1;33m20201119005957728 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140370139542848][chan=0] command is 'POWEROFF'
[0;m[1;33m20201119005957728 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140370139542848][chan=0] response is 'RSP POWEROFF 0'
[0;m[1;33m20201119005957729 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140370139542848][chan=0] command is 'RFMUTE 1'
[0;m[1;33m20201119005957729 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140370139542848][chan=0] response is 'RSP RFMUTE 0 1'
[0;m[1;33m20201119005957746 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140370139542848][chan=0] command is 'SETFORMAT 1'
[0;m[1;33m20201119005957746 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1004 [tid=140370139542848][chan=0] BTS requests TRXD version switch: 1
[0;m[1;33m20201119005957746 [1;33mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1010 [tid=140370139542848][chan=0] switching to TRXD version 1
[0;m[1;33m20201119005957746 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140370139542848][chan=0] response is 'RSP SETFORMAT 1 1'
[0;m[1;33m20201119005957774 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140370139542848][chan=0] command is 'RXTUNE 1781400'
[0;m20201119005957945 [1;32mDDEV[0;m <0005> UHDDevice.cpp:1032 [tid=140370139542848][chan=0] set_freq(1.7814e+09, Rx): Tune Result:
    Target RF  Freq: 1781.400000 (MHz)
    Actual RF  Freq: 1781.399999 (MHz)
    Target DSP Freq: -0.000001 (MHz)
    Actual DSP Freq: -0.000001 (MHz)

[1;33m20201119005957945 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140370139542848][chan=0] response is 'RSP RXTUNE 0 1781400'
[0;m[1;33m20201119005957946 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140370139542848][chan=0] command is 'TXTUNE 1876400'
[0;m20201119005957971 [1;32mDDEV[0;m <0005> UHDDevice.cpp:1032 [tid=140370139542848][chan=0] set_freq(1.8764e+09, Tx): Tune Result:
    Target RF  Freq: 1876.400000 (MHz)
    Actual RF  Freq: 1876.399999 (MHz)
    Target DSP Freq: 0.000001 (MHz)
    Actual DSP Freq: 0.000001 (MHz)

[1;33m20201119005957971 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140370139542848][chan=0] response is 'RSP TXTUNE 0 1876400'
[0;m[1;33m20201119005957972 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140370139542848][chan=0] command is 'RFMUTE 0'
[0;m[1;33m20201119005957972 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140370139542848][chan=0] response is 'RSP RFMUTE 0 0'
[0;m[1;33m20201119005957972 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140370139542848][chan=0] command is 'SETTSC 7'
[0;m[1;33m20201119005957972 [1;33mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:983 [tid=140370139542848] Changing TSC from 0 to 7
[0;m[1;33m20201119005957972 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140370139542848][chan=0] response is 'RSP SETTSC 0 7'
[0;m[1;33m20201119005957973 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140370139542848][chan=0] command is 'RFMUTE 1'
[0;m[1;33m20201119005957973 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140370139542848][chan=0] response is 'RSP RFMUTE 0 1'
[0;m[1;33m20201119005957973 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140370139542848][chan=0] command is 'NOMTXPOWER'
[0;m[1;33m20201119005957973 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140370139542848][chan=0] response is 'RSP NOMTXPOWER 0 7'
[0;m[1;33m20201119005957974 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140370139542848][chan=0] command is 'POWERON'
[0;m20201119005957974 [1;33mDMAIN[0;m <0000> Transceiver.cpp:290 [tid=140370139542848] Starting the transceiver
20201119005957974 [1;32mDMAIN[0;m <0000> radioInterface.cpp:195 [tid=140370139542848] Starting radio device
20201119005957974 [1;32mDDEV[0;m <0005> UHDDevice.cpp:741 [tid=140370139542848] Starting USRP...
20201119005957974 [1;32mDMAIN[0;m <0000> Threads.cpp:119 [tid=140369975142144] Thread 140369975142144 (task 19951) set name: UHDAsyncEvent
20201119005958095 [1;32mDDEV[0;m <0005> UHDDevice.cpp:716 [tid=140370139542848] Initial timestamp 3816673
20201119005958095 [1;32mDDEV[0;m <0005> UHDDevice.cpp:758 [tid=140370139542848] The current time is 3.52534 seconds
20201119005958095 [1;32mDMAIN[0;m <0000> radioInterface.cpp:216 [tid=140370139542848] Radio started
20201119005958095 [1;32mDMAIN[0;m <0000> Threads.cpp:119 [tid=140369966749440] Thread 140369966749440 (task 19952) set name: TxLower
20201119005958095 [1;32mDMAIN[0;m <0000> Threads.cpp:119 [tid=140369958356736] Thread 140369958356736 (task 19953) set name: RxLower
[1;33m20201119005958096 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140370139542848][chan=0] response is 'RSP POWERON 0'
[0;m20201119005958096 [1;32mDMAIN[0;m <0000> Threads.cpp:119 [tid=140369941571328] Thread 140369941571328 (task 19955) set name: TxUpper0
20201119005958096 [1;32mDMAIN[0;m <0000> Threads.cpp:119 [tid=140369949964032] Thread 140369949964032 (task 19954) set name: RxUpper0
20201119005958097 [1;33mDTRXCLK[0;m <0001> Transceiver.cpp:1149 [tid=140369958356736] Sending CLOCK indications
20201119005958097 [1;32mDTRXCLK[0;m <0001> Transceiver.cpp:1268 [tid=140369958356736] sending IND CLOCK 1063263
[1;33m20201119005958098 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140370139542848][chan=0] command is 'SETPOWER 0'
[0;m20201119005958098 [1;32mDDEV[0;m <0005> UHDDevice.cpp:420 [tid=140370139542848] Set TX gain to 89.75dB, ~7.5 dBm (asked for 89.75 dB, ~7.5 dBm)
[1;33m20201119005958098 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140370139542848][chan=0] response is 'RSP SETPOWER 0 0'
[0;m[1;33m20201119005958116 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140370139542848][chan=0] command is 'SETRXGAIN 50'
[0;m20201119005958116 [1;32mDDEV[0;m <0005> UHDDevice.cpp:358 [tid=140370139542848] Set RX gain to 50dB (asked for 50dB)
[1;33m20201119005958116 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140370139542848][chan=0] response is 'RSP SETRXGAIN 0 50'
[0;m[1;33m20201119005958117 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140370139542848][chan=0] command is 'SETSLOT 0 5'
[0;m[1;33m20201119005958117 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140370139542848][chan=0] response is 'RSP SETSLOT 0 0 5'
[0;m[1;33m20201119005958117 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140370139542848][chan=0] command is 'SETSLOT 1 1'
[0;m[1;33m20201119005958117 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140370139542848][chan=0] response is 'RSP SETSLOT 0 1 1'
[0;m[1;33m20201119005958117 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140370139542848][chan=0] command is 'SETSLOT 2 1'
[0;m[1;33m20201119005958117 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140370139542848][chan=0] response is 'RSP SETSLOT 0 2 1'
[0;m[1;33m20201119005958118 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140370139542848][chan=0] command is 'SETSLOT 3 1'
[0;m[1;33m20201119005958118 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140370139542848][chan=0] response is 'RSP SETSLOT 0 3 1'
[0;m[1;33m20201119005958118 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140370139542848][chan=0] command is 'SETSLOT 4 8'
[0;m[1;33m20201119005958118 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140370139542848][chan=0] response is 'RSP SETSLOT 0 4 8'
[0;m[1;33m20201119005958118 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140370139542848][chan=0] command is 'SETSLOT 5 3'
[0;m[1;33m20201119005958118 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140370139542848][chan=0] response is 'RSP SETSLOT 0 5 3'
[0;m[1;33m20201119005958119 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140370139542848][chan=0] command is 'SETSLOT 6 7'
[0;m[1;33m20201119005958119 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140370139542848][chan=0] response is 'RSP SETSLOT 0 6 7'
[0;m[1;33m20201119005958119 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:878 [tid=140370139542848][chan=0] command is 'SETSLOT 7 13'
[0;m[1;33m20201119005958119 [1;32mDTRXCTRL[0;m[1;33m <0002> Transceiver.cpp:1032 [tid=140370139542848][chan=0] response is 'RSP SETSLOT 0 7 13'
[0;m20201119005959099 [1;32mDTRXCLK[0;m <0001> Transceiver.cpp:1268 [tid=140369958356736] sending IND CLOCK 1063479
20201119010000097 [1;32mDTRXCLK[0;m <0001> Transceiver.cpp:1268 [tid=140369958356736] sending IND CLOCK 1063696
20201119010000911 [1;33mDTRXDDL[0;m <0003> Transceiver.cpp:1049 [tid=140369941571328][chan=0] mDataSockets read(18) failed: -1
20201119010000911 [1;31mDTRXDDL[0;m <0003> Transceiver.cpp:1345 [tid=140369941571328][chan=0] Something went wrong in thread TxUpper0, requesting stop
20201119010000912 [1;33mDMAIN[0;m <0000> proto_trxd.c:113 [tid=19939][chan=0] mDataSockets write(18) failed: -1
20201119010000912 [1;31mDTRXDUL[0;m <0004> Transceiver.cpp:1294 [tid=140369949964032][chan=0] Something went wrong in thread RxUpper0, requesting stop
20201119010001099 [1;32mDTRXCLK[0;m <0001> Transceiver.cpp:1268 [tid=140369958356736] sending IND CLOCK 1063913
20201119010001724 [1;33mDMAIN[0;m <0000> osmo-trx.cpp:555 [tid=140370139542848] Shutting down transceiver...
20201119010001724 [1;33mDMAIN[0;m <0000> Transceiver.cpp:348 [tid=140370139542848] Stopping the transceiver
20201119010001727 [1;32mDMAIN[0;m <0000> Transceiver.cpp:361 [tid=140370139542848] Stopping the device
20201119010001735 [1;33mDMAIN[0;m <0000> Transceiver.cpp:374 [tid=140370139542848] Transceiver stopped
