Failed
dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_trx-lms-limenet-micro+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=32411): Process ended prematurely: osmo-stp_10.42.42.5(pid=32411) [trial-2351↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32411)]
Standard Output
---------------------------------------------- trial-2351 dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 00:12:03.813414 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 00:12:03.824378 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 00:12:03.973292 tst switch_tch_pdch.py: using LAC 17724 00:12:04.091077 tst switch_tch_pdch.py: using RAC 129 00:12:04.209238 tst switch_tch_pdch.py: using CellId 17724 00:12:04.327471 tst switch_tch_pdch.py: using BVCI 17725 00:12:04.350496 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 00:12:04.361677 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 00:12:04.372374 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 00:12:04.383207 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 00:12:04.394406 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 00:12:04.405271 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 00:12:04.416023 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 00:12:04.426784 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 00:12:04.543822 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 00:12:04.817805 tst switch_tch_pdch.py:51: start network... 00:12:04.941620 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:12:05.389399 run create_hlr_db(pid=32405): Launched 00:12:05.510225 bus /gobi_6: Setting Powered False 00:12:06.580764 run create_hlr_db(pid=32405): Terminated: ok {rc=0} 00:12:06.974817 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32407): Launched 00:12:07.290084 run osmo-hlr_10.42.42.2(pid=32408): Launched 00:12:07.404280 run osmo-stp_10.42.42.5: Starting osmo-stp 00:12:07.895080 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32410): Launched 00:12:08.190126 run osmo-stp_10.42.42.5(pid=32411): Launched 00:12:08.296416 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:12:08.788517 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32413): Launched 00:12:08.895234 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:12:09.153582 run patchelf(pid=32414): Launched 00:12:09.327646 run osmo-stp_10.42.42.5(pid=32411): ERR: Terminated: ERROR {rc=1} [trial-2351↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32411)] 00:12:09.455152 run osmo-stp_10.42.42.5(pid=32411): stdout: | (launched: 2022-12-09_00:12:08.045707) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:12:09.582463 run osmo-stp_10.42.42.5(pid=32411): stderr: | �[0;m�[38;5;43m20221209001208215 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209001208215 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209001208215 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209001208216 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209001208218 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209001208218 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209001208218 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:12:09.704558 run osmo-stp_10.42.42.5(pid=32411): stdout: | (launched: 2022-12-09_00:12:08.045707) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:12:09.826290 run osmo-stp_10.42.42.5(pid=32411): stderr: | �[0;m�[38;5;43m20221209001208215 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209001208215 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209001208215 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209001208216 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209001208218 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209001208218 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209001208218 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:12:09.967362 run patchelf(pid=32414): Terminating (SIGINT) 00:12:10.133179 run patchelf(pid=32414): Terminated: ok {rc=0} 00:12:10.163351 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=32411): Process ended prematurely: osmo-stp_10.42.42.5(pid=32411) [trial-2351↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32411)] [trial-2351↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 00:12:10.171988 tst switch_tch_pdch.py:54: Test FAILED (6.3 sec) 00:12:10.230299 run osmo-hlr_10.42.42.2(pid=32408): ERR: Terminated: ERROR {rc=237} [trial-2351↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32408)] 00:12:10.278062 run osmo-hlr_10.42.42.2(pid=32408): stdout: | (launched: 2022-12-09_00:12:07.135386) 00:12:10.326598 run osmo-hlr_10.42.42.2(pid=32408): stderr: | �[0;m�[1;31m20221209001207333 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209001207333 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209001207333 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209001207333 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209001207333 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209001207333 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209001207345 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209001207353 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209001207354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209001207354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:12:10.367887 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32407): Terminating (SIGTERM) 00:12:10.406522 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32410): Terminating (SIGTERM) 00:12:10.445398 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32413): Terminating (SIGTERM) 00:12:10.454437 --- ParallelTerminationStrategy: PID 32407 died... 00:12:10.506414 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32407): Terminated: ok {rc=0} 00:12:10.515803 --- ParallelTerminationStrategy: PID 32410 died... 00:12:10.567677 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32410): Terminated: ok {rc=0} 00:12:10.577086 --- ParallelTerminationStrategy: PID 32413 died... 00:12:10.628855 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32413): Terminated: ok {rc=0} 00:12:10.715678 bus /gobi_0: Setting Powered False 00:12:11.819022 bus /gobi_0: Setting Powered False 00:12:12.929089 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32411): Process ended prematurely: osmo-stp_10.42.42.5(pid=32411) [trial-2351↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32411)]