Failed
gprs:oc2g.iperf3.py (from gprs_oc2g)
Stacktrace
osmo-stp_10.42.42.5(pid=4019): Process ended prematurely: osmo-stp_10.42.42.5(pid=4019) [trial-2352↪gprs:oc2g↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4019)]
Standard Output
---------------------------------------------- trial-2352 gprs:oc2g iperf3.py ---------------------------------------------- 00:54:29.507563 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:54:29.519158 tst gprs:oc2g: Using 1 x bts (candidates: 1) 00:54:29.652322 tst iperf3.py: using LAC 17939 00:54:29.783038 tst iperf3.py: using RAC 89 00:54:29.911927 tst iperf3.py: using CellId 17939 00:54:30.042192 tst iperf3.py: using BVCI 17940 00:54:30.067395 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:54:30.078438 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:54:30.089450 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:54:30.100304 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:54:30.111131 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:54:30.121956 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:54:30.132811 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:54:30.143810 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:54:30.154819 tst gprs:oc2g: Using 1 x modem (candidates: 4) 00:54:30.437758 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 00:54:30.564805 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:54:30.889485 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4011): Launched 00:54:31.179316 run iperf3-srv_10.42.42.10(pid=4012): Launched 00:54:31.388107 tst iperf3.py:8: start network... 00:54:31.529947 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:54:32.098522 run create_hlr_db(pid=4013): Launched 00:54:32.291711 bus /gobi_6: Setting Powered False 00:54:33.310253 run create_hlr_db(pid=4013): Terminated: ok {rc=0} 00:54:33.721571 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4015): Launched 00:54:34.028105 run osmo-hlr_10.42.42.2(pid=4016): Launched 00:54:34.147008 run osmo-stp_10.42.42.5: Starting osmo-stp 00:54:34.687422 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4018): Launched 00:54:34.995880 run osmo-stp_10.42.42.5(pid=4019): Launched 00:54:35.107654 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:54:35.643792 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4021): Launched 00:54:35.753052 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:54:36.022318 run patchelf(pid=4022): Launched 00:54:36.202105 run osmo-stp_10.42.42.5(pid=4019): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:oc2g↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4019)] 00:54:36.333856 run osmo-stp_10.42.42.5(pid=4019): stdout: | (launched: 2022-12-09_00:54:34.842427) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:54:36.465347 run osmo-stp_10.42.42.5(pid=4019): stderr: | �[0;m�[38;5;43m20221209005435012 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209005435013 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209005435013 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209005435013 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209005435015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209005435016 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209005435016 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:54:36.592627 run osmo-stp_10.42.42.5(pid=4019): stdout: | (launched: 2022-12-09_00:54:34.842427) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:54:36.718294 run osmo-stp_10.42.42.5(pid=4019): stderr: | �[0;m�[38;5;43m20221209005435012 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209005435013 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209005435013 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209005435013 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209005435015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209005435016 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209005435016 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:54:36.865402 run patchelf(pid=4022): Terminating (SIGINT) 00:54:37.038093 run patchelf(pid=4022): Terminated: ok {rc=0} 00:54:37.070103 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=4019): Process ended prematurely: osmo-stp_10.42.42.5(pid=4019) [trial-2352↪gprs:oc2g↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4019)] [trial-2352↪gprs:oc2g↪iperf3.py:8] 00:54:37.079439 tst iperf3.py:8: Test FAILED (7.6 sec) 00:54:37.140826 run osmo-hlr_10.42.42.2(pid=4016): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:oc2g↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4016)] 00:54:37.190769 run osmo-hlr_10.42.42.2(pid=4016): stdout: | (launched: 2022-12-09_00:54:33.876193) 00:54:37.241301 run osmo-hlr_10.42.42.2(pid=4016): stderr: | �[0;m�[1;31m20221209005434056 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209005434056 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209005434057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209005434057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209005434057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209005434057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209005434069 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:oc2g/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209005434077 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209005434078 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209005434078 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:54:37.284080 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4011): Terminating (SIGTERM) 00:54:37.324553 run iperf3-srv_10.42.42.10(pid=4012): Terminating (SIGTERM) 00:54:37.365184 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4015): Terminating (SIGTERM) 00:54:37.405720 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4018): Terminating (SIGTERM) 00:54:37.446252 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4021): Terminating (SIGTERM) 00:54:37.455942 --- ParallelTerminationStrategy: PID 4011 died... 00:54:37.511673 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4011): Terminated: ok {rc=0} 00:54:37.521888 --- ParallelTerminationStrategy: PID 4012 died... 00:54:37.575808 run iperf3-srv_10.42.42.10(pid=4012): Terminated {rc=256} 00:54:37.585967 --- ParallelTerminationStrategy: PID 4015 died... 00:54:37.640318 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4015): Terminated: ok {rc=0} 00:54:37.650299 --- ParallelTerminationStrategy: PID 4018 died... 00:54:37.704420 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4018): Terminated: ok {rc=0} 00:54:37.714066 --- ParallelTerminationStrategy: PID 4021 died... 00:54:37.767069 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4021): Terminated: ok {rc=0} 00:54:37.855124 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4019): Process ended prematurely: osmo-stp_10.42.42.5(pid=4019) [trial-2352↪gprs:oc2g↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4019)]