Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=5136): Process ended prematurely: osmo-stp_10.42.42.5(pid=5136) [trial-2356↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5136)]
Standard Output
---------------------------------------------- trial-2356 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 07:04:09.213614 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:04:09.225278 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 07:04:09.382650 tst cs_paging_gprs_active.py: using LAC 19755 07:04:09.515588 tst cs_paging_gprs_active.py: using RAC 120 07:04:09.649250 tst cs_paging_gprs_active.py: using CellId 19755 07:04:09.782432 tst cs_paging_gprs_active.py: using BVCI 19756 07:04:09.808257 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:04:09.819637 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:04:09.830821 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:04:09.843243 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:04:09.854854 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:04:09.866624 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:04:09.878162 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:04:09.889686 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:04:09.901294 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:04:10.020149 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:04:10.306300 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:04:10.437471 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:04:10.767324 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5126): Launched 07:04:11.057082 run iperf3-srv_10.42.42.10(pid=5127): Launched 07:04:11.262680 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:04:11.402533 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:04:11.749559 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5128): Launched 07:04:12.058967 run iperf3-srv_10.42.42.10(pid=5129): Launched 07:04:12.264202 tst cs_paging_gprs_active.py:38: start network... 07:04:12.404373 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:04:12.942179 run create_hlr_db(pid=5130): Launched 07:04:13.136015 bus /gobi_6: Setting Powered False 07:04:14.157133 run create_hlr_db(pid=5130): Terminated: ok {rc=0} 07:04:14.602051 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5132): Launched 07:04:14.938037 run osmo-hlr_10.42.42.2(pid=5133): Launched 07:04:15.058951 run osmo-stp_10.42.42.5: Starting osmo-stp 07:04:15.638306 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5135): Launched 07:04:16.027200 run osmo-stp_10.42.42.5(pid=5136): Launched 07:04:16.171466 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:04:16.845440 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5138): Launched 07:04:16.968456 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:04:17.306541 run patchelf(pid=5139): Launched 07:04:17.490106 run osmo-stp_10.42.42.5(pid=5136): ERR: Terminated: ERROR {rc=1} [trial-2356↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5136)] 07:04:17.623939 run osmo-stp_10.42.42.5(pid=5136): stdout: | (launched: 2022-12-09_07:04:15.808432) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:04:17.757644 run osmo-stp_10.42.42.5(pid=5136): stderr: | �[0;m�[38;5;43m20221209070416182 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209070416182 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209070416182 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209070416182 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209070416183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209070416183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209070416183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:04:17.887072 run osmo-stp_10.42.42.5(pid=5136): stdout: | (launched: 2022-12-09_07:04:15.808432) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:04:18.015143 run osmo-stp_10.42.42.5(pid=5136): stderr: | �[0;m�[38;5;43m20221209070416182 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209070416182 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209070416182 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209070416182 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209070416183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209070416183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209070416183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:04:18.163488 run patchelf(pid=5139): Terminating (SIGINT) 07:04:18.338017 run patchelf(pid=5139): Terminated: ok {rc=0} 07:04:18.370160 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5136): Process ended prematurely: osmo-stp_10.42.42.5(pid=5136) [trial-2356↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5136)] [trial-2356↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 07:04:18.379667 tst cs_paging_gprs_active.py:38: Test FAILED (9.2 sec) 07:04:18.440798 run osmo-hlr_10.42.42.2(pid=5133): ERR: Terminated: ERROR {rc=237} [trial-2356↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5133)] 07:04:18.490455 run osmo-hlr_10.42.42.2(pid=5133): stdout: | (launched: 2022-12-09_07:04:14.772886) 07:04:18.541277 run osmo-hlr_10.42.42.2(pid=5133): stderr: | �[0;m�[1;31m20221209070414975 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209070414975 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209070414975 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209070414975 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209070414976 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209070414976 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209070414990 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209070414998 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209070414998 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209070414998 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:04:18.583638 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5126): Terminating (SIGTERM) 07:04:18.623710 run iperf3-srv_10.42.42.10(pid=5127): Terminating (SIGTERM) 07:04:18.663977 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5128): Terminating (SIGTERM) 07:04:18.703875 run iperf3-srv_10.42.42.10(pid=5129): Terminating (SIGTERM) 07:04:18.743844 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5132): Terminating (SIGTERM) 07:04:18.783727 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5135): Terminating (SIGTERM) 07:04:18.823658 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5138): Terminating (SIGTERM) 07:04:18.833446 --- ParallelTerminationStrategy: PID 5126 died... 07:04:18.887551 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5126): Terminated: ok {rc=0} 07:04:18.897778 --- ParallelTerminationStrategy: PID 5127 died... 07:04:18.951245 run iperf3-srv_10.42.42.10(pid=5127): Terminated {rc=256} 07:04:18.960725 --- ParallelTerminationStrategy: PID 5128 died... 07:04:19.014363 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5128): Terminated: ok {rc=0} 07:04:19.024201 --- ParallelTerminationStrategy: PID 5129 died... 07:04:19.077496 run iperf3-srv_10.42.42.10(pid=5129): Terminated {rc=256} 07:04:19.087307 --- ParallelTerminationStrategy: PID 5132 died... 07:04:19.141072 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5132): Terminated: ok {rc=0} 07:04:19.150953 --- ParallelTerminationStrategy: PID 5135 died... 07:04:19.204548 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5135): Terminated: ok {rc=0} 07:04:19.214459 --- ParallelTerminationStrategy: PID 5138 died... 07:04:19.268573 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5138): Terminated: ok {rc=0} 07:04:19.357357 bus /gobi_0: Setting Powered False 07:04:20.461526 bus /gobi_0: Setting Powered False 07:04:21.573704 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5136): Process ended prematurely: osmo-stp_10.42.42.5(pid=5136) [trial-2356↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5136)]